# data[].attributes.body
Made on a 3D printer

# data[].attributes.attachment_link.readable_text
This design has undergone review in a clinical setting and has been found appropriate when fabricated with the printer type and materials specified.

General Information

How to Make

Pre- and Postprocessing Instructions

Make sure your first layer isn't too low or one side of the print that's resting against the head or neck will stick out and be sharp.

Attribution

Designed by Erin Shircliffe @ 3dpDesignLab

Documentation

Supplemental Documentation

Reviewer Notes

The following refers to: 3dpx-014103

The FDA has authorized production of the ear saver outside of the normal clearance pathway during the Covid-19 pandemic, based on Part 5, section D of the "Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency Guidance for Industry and Food and Drug Administration Staff."

This ear saver has undergone review in a clinical setting and is recommended when fabricated as instructed.

RESOLVED:

For documentation purposes, we cannot accept links to external websites for printing instructions, instructions for use, etc. Instructions need to be included as a PDF or as text on the NIH 3D Print Exchange website. -05.01.20

Medium EarSaver

Small EarSaver

Comments

# data[].attributes.attachment_link.description
General Information How to Make Pre- and Postprocessing Instructions Make sure your first layer isn't too low or one side of the print that's resting against the head or neck will stick out and be sharp.

# data[].attributes.attachment_link.readable_text
When the call to make masks for heroes began, it was time to shift focus and make protective masks for those on the front lines supporting communities and people in a time of incredible need. After researching cotton mask patterns, I found a few favorites and began to make and test each mask. I prototyped over twenty-five designs, making modifications to improve comfort and quality while maintaining Aplat's zero waste and origami design principles.

I'm excited to share with you the final Aplat Mask design. I love its simple geometry and origami folds that adjust and fit over a wide range of face shapes and sizes. This design takes the pressure off of the ears and nose. It fits perfectly with glasses and goggles, reducing fog on the lens when breathing. The neck strap is adjustable, allowing the mask to hang around the neck when not in use. It folds nicely to keep dust particles out too. And there is space on the sides to mark your mask to avoid accidental mix-ups.

Although these are not N95 quality, there is an option to add an extra layer of protection by inserting a coffee filter under the lining. To sterilize your mask, simply machine wash or steam press with iron for 10 minutes after each use.

Aplat Mask Features

Comfortable over the head adjustable strap

Form fitting design

Area to insert a disposable coffee filter

DIY Instructions
DOWNLOAD APLAT PATTERN HERE (8.5" x11" letter size).*
Print at 90-95% scale for younger children(5-7 years old).
*DISCLAIMER:
THE USE OF APLAT'S MASK DESIGN IS FOR INDIVIDUAL, NON-COMMERCIAL USE ONLY. You are not authorized to use the Aplat mask design for commercial purposes, including but not limited to manufacturing, distribution and sale of the Aplat mask. All intellectual property rights to the Aplat mask design are expressly reserved. ©2020 Aplat Inc | U.S. Patent Pending 29/739,249

To make an Aplat Mask you will need:

We recommend a heavy weight 100% cotton fabric 7oz-10oz at least 11" x 8"

Cotton cord, ribbon or shoe-lace for head strap at least 47" long and ¼" diameter

Step 1:
Print the Aplat Mask pattern on a letter size sheet of paper. For younger children, scale the pattern 90% to 95% before printing. Cut out and lay the paper pattern on two layers of cotton fabric. If your fabric has a face side or patterned side, layer the two cut pieces with the face side/patterned side inwards. Trace the outline with a pen and cut.

Step 2:
Stitch around the perimeter of the mask ¼" away from the edge of the seam. This is called a top stitch. Make sure to leave ½" openings on all four diagonal corners as shown above and an opening at the bottom creating a pocket.

Step 3:
Turn the sewn pocket inside out. Loop cord (47" long) through the open holes. Please do not use elastic ties that will melt in the dryer over time and are not biodegradable.

Step 4:
Top stitch the last open edge of the mask ¼" away from the edge of the seam.

Step 5:
Fold the top and bottom flaps to the center, to become the nose and chin cover. Top stitch the sides 1¼" from the edge as shown above.

Step 5 - Kids Size:
Simply fold the top and bottom in closer, finishing the rectangle at 2.5" tall. The two side top stitch can also come in towards the center, 1.5"-2" away from each edge.

front view

top view

side view
Step 6:
Open folded top and bottom at center and press near the seam to get a crisp "butterfly" wing to form, comfortably covering your nose and chin.

Please follow CDC guidelines - maintain six feet of physical distance, wash your hands frequently and thoroughly, and do not touch your face.

# data[].attributes.attachment_link.description
When the call to make masks for heroes began, it was time to shift focus and make protective masks for those on the front lines supporting communities and people in a time of incredible need. After researching cotton mask patterns, I found a few favorites and began to make and test each mask.

# data[].attributes.body
by miss D

# data[].attributes.body
They wear a mask to walk underwater and in the air 😱

# data[].attributes.body
A mask that have different designs

# data[].attributes.body
Filter that covers the eyes from the nose

# data[].attributes.body
i thought this one was pretty cool

# data[].attributes.body
I think its weird that its open at the bottom

# data[].attributes.body
HAND SANITIZING AND WASHING
:)

# data[].attributes.headline
Swim Mask HEPA PAPR (Instructable) — A PAPR (powered air purifying respirator) forces air through a filter into a sealed mask to protect workers; here’s a DIY version designed by physician Randell Vallero MD using a 5V computer fan, HEPA filter from a vacuum cleaner, and a full face swim mask. by miss D

# data[].attributes.subject
Swim Mask HEPA PAPR (Instructable) — A PAPR (powered air purifying respirator) forces air through a filter into a sealed mask to protect workers; here’s a DIY version designed by physician Randell Vallero MD using a 5V computer fan, HEPA filter from a vacuum cleaner, and a full face swim mask. by miss D

# data[].attributes.headline
Be creative on your mask so it wont me so simple and boring.

# data[].attributes.subject
Be creative on your mask so it wont me so simple and boring.

# data[].attributes.body
- Lucero Hernandez