# data[].attributes.body
My design is called The Fast Hawk. I chose this plane because it was an expert level and I wanted to challenge myself. I think lift was a problem because my paper airplane did go up during flight. I don't think their was much drag either. The weight was a problem because there was more weight in the front than back. Thrust was good since it was easy to throw and hold.

Here is the link
http://www.foldnfly.com/21.html#Fast-Hawk

# data[].attributes.body
I picked Canard because when I saw it, I knew it was going to go far. I think this because it's big wings plus the two extra wings I thought it would have alot of lift. I also think that the weight of the airplane is pretty balanced. I don't think thrust will be a problem because it is easy to hold the airplane which makes it easy to throw the airplane. Drag can be a problem because the air gets caught up in a spot in between the extra and the normal wings.

A link to make it is here

# data[].attributes.body
I picked the Sea glider because it looked cool and I thought it would go fast and go further. The sea glider does a roll sometimes because it has more weight at the front and when it throw it sometimes it falls and goes to the left side. It does a roll and falls down because it does not have egnouf lift a thrust, and drag it needs lift because it falls down fast so it needs to stay up longer. It needs thrust so it could go straight and it needs drag because it could go. Further and faster. The good thing is that the wings are equal.

# data[].attributes.body
My plane worked out not so good. When I was making my airplane I noticed the weight was a bit problem in the front the front had more folds and more weight.
The lift won't be a problem because it has not so big wings it will be ok.
The drag will be a problem because the front has more weight so it might fall forward.
The thrust won't be a problem because it's easy to through and hold it turned out pretty good.
http://www.funpaperairplanes.com/pdf/Interceptor_sample.pdf

# data[].attributes.body
My airplane design is called 'Star flight '. I picked this design because it's a design used to make jets and I love jets.l think lift will be a problem cause it has lots of weight . I think wieght won't be a problem cause my plane has lots of weight. I think  drag won't be a problem cause all planes have drag and my plan should have drag.l think thrust souldn 't  be an issue  cause my plane's  start has a star and it has a way air let go and it's easy to throw.

http://www.foldnfly.com/26.html#Star-Flight

# data[].attributes.body
My plane did not turn out good because when I was making the airplane I had to fix the lift and thrust because my airplane curves and it slows down. The classic dart was maybe the best paper plane I made, but I should have followed the steps more slowly and took my time because if you take it apart you can see how much stuff I initially messed up. My biggest problem was folding the airplane. When I looked at it step-by-step, I really didn't follow the rules. I tried to make the plane but didn't use my time well. I had to fold this a lot of times.
Classic Dart -> http://www.funpaperairplanes.com/pdf/Classic_Dart_sample.pdf

# data[].attributes.body
My plane is the spear plane I think my  plane is going to go fair because of the lift drag weigh thrust .I picked this airplane because it is simple and easy. I think the weight is a problem because it is going to fly strate down.And the lift weight and drage won t be a big problem for the airplane

# data[].attributes.attachment_link.description
A database of paper airplane folding designs and instructions

# data[].attributes.body
My airplane is called The Gliding plane.I picked this because it has big wings and is easy to make I can't make good airplanes. I think that lift won't be a problem because my airplane has big wings and it will pick up some lift. I think that weight will be a problem because it has lots of weight  and it is really big. I think that drag will be a problem because it has a fat back. I think that thrust will not be a problem because my plane has lots of lift.

http://www.foldnfly.com/9.html#Gliding-Plane

# data[].attributes.body
The airplane that I made is called the Star Flight. The reason I picked the Star Flight because it looked like a spaceship but I don't think it will work that good because the back of the plain is really big which will make it fall so drag will be a problem. My plain has long wings so  lift won't be a problem. It's aerodynamic which gives a lot of thrust. It can glide so weight won't be a problem.

http://www.foldnfly.com/26.html#Star-Flight

# data[].attributes.attachment_link.description
A database of paper airplane folding designs and instructions

# data[].attributes.body
gAirplane Design Name’ by Student Name Fabian Lewis My airplane design is called The basic dart. I picked this design because I think it will have a lot of distance and really good with flying . I think lift won't/will be a problem for this airplane because my plane has aI think weight won't/will be a problem for this airplane because because my plane has alot  of wight in the f
Front of the plane because it has a lot I think drag won't/will be a problem for this airplane because because there is no opening to slow me down at the back of the plane. Thrust shouldn't/will be an issue, because my plane is easy to hold and throw.

A link to how to make it is here -> http://www.foldnfly.com/1.html#Basic-Dart

# data[].attributes.body
gMy plane is the Cross Wing. I chose it because it is small and distant. I think lift is going to work because for a small plane is has pretty wide wings. I learned that if you hold it near the endangered throw it, it gives you more thrust. But one thing I am worried about is that the front has too much weight and it will nose dive. The plane is small and light so it will be easier to give it more thrush. I think some drag will be caused by the flaps at the back. I am pretty sure I won't win, but it is a good plane.

Here is the link to make it

http://www.foldnfly.com/14.html#Cross-Wing

# data[].attributes.body
My plane design is called "The Origami Plane". I picked this design because it has duration and distance hoping I made it correctly it should fly very far and should stay afloat for awhile but it is nose heavy
and has acrobatic so it may nosedive a lot. I'm relying on lift and thrust to help my plane but weight will surely be pulling it down.

http://www.foldnfly.com/18.html#Origami-Plane

# data[].attributes.body
My airplane is called the Conder I picked this design because looking at the picture made me think it could win from lift and weight because weight is less and the lift can help me from not falling . The Conder can glide perfectly if you make it right making the Conder was every hard to make but worth it since there is a bird that is called the Conder the hard part where the steps of doing it but all in all that's my airplane the Conder
The Conder

http://www.funpaperairplanes.com/pdf/Condor_sample.pdf

# data[].attributes.body
My airplane design is called 'The Phoenix'. I picked this design because it looked really good and it looked like it would go a long distance. I think it's pretty good because the weight is not that much  so it has more lift, also because it has big wings so it adds more lift. The plane that I made has a heavyer  drag the thrust so it would slow down the plane. Also it does not have that much wight. So over all it is pretty good.
http://www.foldnfly.com/30.html#The-Pheonix

# data[].attributes.body
I think my paper airplane will go the furthest because it's wings provides a lot of lift . The thrust also helps counteract the weight and drag since it's ment for speed. The the plane is pointed , so it reduceses it . And the weight is spread . I choose it simply because it was the only one left.

# data[].attributes.attachment_link.description
A database of paper airplane folding designs and instructions

# data[].attributes.body
My airplane the is called Gliding Dart. I picked this design cause of its big wings it will have alot  of lift. I think weight will be a problem cause of the very big wings. I think drag will be a problem cause the wings pull it down. Thrust isn't a problem because of the big wings that pull it down.
A link to how to make it is here:http://www.foldnfly.com/31.html#Gliding-Dart

# data[].attributes.body
My airplane design is called 'The Spade'.I picked this design because it will glide for a long time in the air.I think lift won't be a problem because my plane has decent size wings.Weight might be a problem because in my plane there is many layers.Thrust shouldn't be an issue because my plane should glide and it is easy to hold and throw.Drag should not be a problem because my plane should go fast and stay steady.I think my plane should turn out good and do as it said in the instructions.
The Spade-http://www.funpaperairplanes.com/pdf/Spade_sample.pdf

# data[].attributes.body
My airplane design is called the hunting flight. I picked this design because it has big wings and it gets lift.. I think lift won't be a problem for this airplane because my plane has big wings.I think weight won't be a problem for this airplane because my plane is not heavy. I think drag will be a problem for this airplane because my plane goes down .Thrust shouldn't  be an issue, because I going to throw the plane.

A link to how to make it is here-
http://www.foldnfly.com/6.html#Hunting-Flight

# data[].attributes.body
My airplane design is called the sprinter. I picked this design because I thought the sprinter will go fast. I think lift will be a problem because my wings are to small. I think weight will be a problem because the top part of my airplane is heavy. Drag won't be a problem because it is not. Thrust will not be issue because I can hold ithttp://www.foldnfly.com/4.html#The-Sprinter

# data[].attributes.body
My plane is not the best beause one wing is not the same so the lift is not going to be the best. The thrust on my plane is not the best beause the back has more weight but it's not that bad. The weight on the back is more than the front beause it has more tape. Finally the drag is really good so it is going to go fare but not that night. This is my small paragraph about my Delta plane.

# data[].attributes.body
My airplane design is called 'The Basic'. I picked this design because it is a simple design to make while still appearing to be able to fly very far. I think lift won't be a problem for this airplane because it has long, large wings. I'm worried about weight and drag because it's very back-heavy (it tilts backwards) and is unevenly weighed down. Thrust shouldn't be an issue, as is it's easy to throw and hold.

A link to how to make it is here -> http://www.foldnfly.com/0.html#The-Basic .