# data[].attributes.body
Wacth this video

# data[].attributes.attachment_link.title
Tacoma Bridge Collapse: The Wobbliest Bridge in the World? (1940) | British Pathé

# data[].attributes.body
I observed that the Tacoma Narrows bridged was moving mostly from side to side.  The winds were 40 miles per hour.  The bridge rocked back and forth and finally it broke apart and a portion of it along with a car and a dog fell into the water.  The called it "Galloping Gertie" because it looked like a bucking horse as it was swaying back and forth.  People went on the bridge for a thrill.  The reason why the bridge failed was due to the fact of the support system.  There was not one strong enough in place to account for the winds.

# data[].attributes.body
I was called gallping gerne because it did not have much support like a hourse jumping up in the air. It did not sussed because it had horbley support

# data[].attributes.body
I believe the bridge was named galloping gurdy because the way the bridge moved looked like it was galloping

# data[].attributes.body
I observed the bridge colapseing is it did not have any thing to hold it up in the middle and it was called galloping girty because it cep goig up and down like it was galloping.

# data[].attributes.body
I observe that the bridge has no beams in the middle. The Bridge was named Galloping Girtey because it wobbled alot. Fasanting! It failed because it had 4 beams for support. It wold be smart if it had more support.
http://ww4.hdnux.com/photos/42/02/00/8921103/3/rawImage.jpg

# data[].attributes.headline
I observe that the bridge collapsed because it didn't have enough support in the middle.

# data[].attributes.subject
I observe that the bridge collapsed because it didn't have enough support in the middle.

# data[].attributes.body
I think the reason they might have called it the Galloping Gery because moved it looked like it was galloping.

# data[].attributes.body
I observed that the bridge was unstable and the wind rocked the bridge and made it collapse and l dog and a  car fell in the water under the bridge because up the material was not strong enough to hold the bridges structure.

# data[].attributes.body
I observed that the Bridge was not stable or built well so the wind rocked it and made it collapse. The structure was in tension, Shear, and stress.
I think that it is called Galloping Gertie because it felt like you were riding a horse or because it might have looked like it was galloping because of the wind.
I think that the Tacoma Bridge failed because of tension, shear, and stress.It was not built good and it was not stable.
In my opinion I think that it is good that very few people were on the bridge but I also think that it is sad because there was one car on the bridge and a dog.

# data[].attributes.body
I observed that the Tacoma bridge did not have a good structure and it made the bridge sway back and forth and cause everyone to stay off the bridge.
Pretty soon the bridge had finally started to collapse a person lost a car, and a dog in the collapstion.
It is called Galloping Gertiy because the bridge had kept swaying back and forth like a galloping horse.
The thing that cause it to fail and collapse was the support beams, they were too thin and weak for that massive bridge.

# data[].attributes.body
I observed that the Tacoma Bridge didn't have good structure. So, when the high winds came it was blown away. I think it was probably very lightweight and didn't have a good designer because I've never seen a bridge blown away by high winds. They named it galloping girtie because when the wind was blowing it was kind of galloping side to side. Like a person does when a bull's galloping or a horse is taking it's time walking. I got that from the hallmark channel. The structure it had caused it to fail. It didn't have good structure at all. Like I said before it was probably super lightweight. It was going from side to side like a swing goes when you push it from the side

# data[].attributes.body
The reason i think the bridge collapsed is because the beams did not have enough tension.this caused the bridge to start swaying back and forth. They probably nicknamed the bridge galloping Gertie because when it was moving it looked like it was galloping with the side to side movement.What i observed about the bridge is that the bridge did not have enough support structure underneath the bridge i think this caused it to collapse.

# data[].attributes.body
i saw that saw that the the tacoma bridge did not have enough support           so it was shaking a lot.I think that the bridge was called galliping gertie because it callapesd

# data[].attributes.body
I observed that the Tacoma Bridge was swaying back and forth and was not a good structure so it looked like it was going to collapse. It is called the Galloping Gertie because it was like you were on the back of a horse. It failed because the support beams where not thick enough to hold the bridge and the lack of gerties.

# data[].attributes.body
I  observed the Tacoma bridge and it wasn't made of good material and it didn't have good support.The reason it was called galloping gertie because it was shaking and wobbling around like a galloping horse.The reason why it fell down was because it had a bad support and material.

# data[].attributes.body
I observed that the Tacoma bridge did not have a good structure and the wind blew under the bridge witch made it wobble and the it collapsed.I think they named it galloping gertie because it moved a lot and kind of looked like it was galloping.It failed because they did not test it out before they let people go on it and it did not have a good structure.It was not built stable.In my opinion they should have tested it out first so nobody would have gotten hurt

# data[].attributes.body
I observed that the Tacoma bridge was not built well it was in tension, shear and stress.It was really wobbly because the cords were too weak to hold it up.
It was named Galloping Gertie  because people thought it looked funny when it would moved and it looked like it was galloping.It failed because the men that built it did not provide enough cords to hold up the bridge and it did not have anything holding the bottom so it did not have structure.

# data[].attributes.body
I observed that the Tacoma Bridge did not have a good structure and the wind made it collapse. I think the bridge's nickname is "Galliping Gertie" because it

# data[].attributes.body
The bridge was very tipsy turny and had already looked like it was gong to fall and as i predicted it fell into the water below

# data[].attributes.body
I saw that the Tacoma bridge  was wobbling and then it eventually fell along with a few cars and a dog.I think it was called the Galloping Gertie  because it looked like it was galloping because of the wave pattern it was making.I think it fell because it was making the wave pattern so forcefully that it snapped

# data[].attributes.body
I observed that the Tacoma bridge did not have a good base to support the structure itself because the bridge was way to long and heavy.Since the bridge didn't have a good base it collapsed.I think they name the bridge galloping Gertie because it was wobbling side to side and kept moving until it finally gave out and collapsed.Galloping Gertie failed because the base was not strong enough to hold the Tacoma bridge.The structure was to long and big to hold.The winds were to strong and to fast.

# data[].attributes.body
I observed that the Tacoma Bridge did not have a good structure because it did not have beans to hold it up. It was named that because it would move alot so it looked liked it was Galloping. It failed because it did not structure

# data[].attributes.body
The first thing I noticed was it had few legs.Also, it was named "Galloping Gurtie" because when it it was failing it was shaking up, down, up, down.It fell because it didn't have enough structural support!!!

# data[].attributes.body
i observed that the Tacoma bridge was wobbly and it did not have enough suspension cables plus the wind was 40 mph made it go wobbly and the beams were  very thin and it had no gutters and with all of that,it collapsed.It is called galoping girtie because itfelt like you were on the back of a horse that is galloping.Finally,it failed because it had no gutters and the beams were very thin and it had no suspension cables.

# data[].attributes.body
I observed that the Tacoma narrows  bridge was not stable because there was no where the wind to pass through so then it could not stand,And it is called galloping gerdie  because  it felt like you where on the back of a horse that is galloping when you stood on the bridge.And it was unsucsessful  also because the support beams  where not thick enough.

# data[].attributes.body
I observed that the Tacoma Bridge did not have good structure and was in tension, shear,and stress. In addition I think the Tacoma Bridge was not a good structure because it did not have enough support.

The new Tacoma bridge has gerters which supports the bridge and puts the air pressure below the bridge so that there will not be another unsuccessful bridge like the last.

I think they call the Tacoma Bridge Galloping Gertie because the bridge would be jarring which makes you think of a horse galloping .

# data[].attributes.body
I observed that the Tacoma bridge didn't have a strong support.  I think it is called galloping gertie  because it kind of buck's thinks like horses do. It failed because they didn't test it out before they let people get on it

# data[].attributes.headline
Nickolas   I observed that the Tacoma bridge fell over because the wind blew under the bridge and that caused the bridge to wobble and fall over. Later they put a structure under the bridge so they would not fall over and more cars could drive by from New Jersey.

# data[].attributes.subject
Nickolas   I observed that the Tacoma bridge fell over because the wind blew under the bridge and that caused the bridge to wobble and fall over. Later they put a structure under the bridge so they would not fall over and more cars could drive by from New Jersey.

# data[].attributes.body
I observed that The  Tacoma Bridge   was not a good structure and was not thought about and the builders did not focus on the safety of the bridge as much as they did on the style or how it looked.I think it could have had a better structure and could have been way more safe.They called it galloping gertie because before it fell it would always buck like a horse and sway side to side, mostly when the winds would pick up.

# data[].attributes.body
I observed that the the bridge was v ery wobbly and it did not have enough suspension cables and the
beams were very thin and it did not have that many support beams. And   without all of that the bridge collapsed. The bridge collapsed because the wind was 40 mph  and it forced the bridge to break and collapse  it could have not collapsed if the beams were thicker beams. And so the bridge was not succesful. It was called galloping girdie because it looked like if it was galloping

# data[].attributes.body
I observed that it was not as sturdy as it was reqiured to be. also that it was built to lite  the wind  blew it like a wave.It was called galloping gurtey because it would jump up like you do when you are galloping.

# data[].attributes.body
I observed that the bridge would go side to side and up and down when winds would reach over 30 miles per hour and that was because it was pore structured and it was in stress that is my observation and that is why they they called it galloping gertie and it collapesd because the winds got to rough and it collapesd.

# data[].attributes.body
I observed that the Tacoma Narrow bridge was not a very sturdy structure and had problems that the person who built it should have fixed hoping it would be a success. It also was could galloping gertie because it moved up in down.
The day it fell the wind was so and made it break mainly because it was not sturdy and did not have anything to keep it stable.

# data[].attributes.body
I observed that the tacoma bridge . It had fallen because  the lack of suspenders . I smart right. NOT! It was supposed to have more suspenders so the wind would NOT MAKE IT SHAKE!!! WOW ENGERNEERS NEED TO DO BETTER WITH THE GALLOPING BRIDGE  !!! So what would you do? I would lesson better.

# data[].attributes.body
I observed that the Tacoma Narrows  Bridge did not have  much  support and     it did not have the part where the air went through and it did not have any
wires.  Q1. They called it galloping gerte
because the bridge was going up and down and side to side.  Q2.  The bridge was unsceuseful  because  it did not have  any support and it did not have wires.

# data[].attributes.body
I observed that the Tacoma narrows bridge did not have as much support as the newer version because the older version did not have the Gerters beneath the bridge.
They called it galloping Gertie because the enginers name was Gertie .They said it was galloping because it would wave back and forth with the force of the heavy wind.
The bridge collapsed because the wind was super heavy and caused the bridge to collaps with force.

# data[].attributes.body
What I observed about the Tacoma Narrows Bridge is that it did not have enough support to withstand strong winds. Unlike the George Washington Bridge and the Brooklyn Bridge  the Tacoma bridge was unsuccesful. They called it galloping Gertie because the strong winds will make it swing. It again did not have enough support. People would go on it just for the bumpy ride. A 40 MPH wind made a poorly structured Tacoma bridge crash in 1940. Also, another reason that "galloping Gertie" fell was because they did not have modern day equipment to build a good enough bridge. However, I feel like even if you were an engineer in the 1940s you would have a college degree in engeneeringand should be smart enough to build a relevent bridge.

# data[].attributes.body
I observed that the Tacoma Narrows Bridge was tossed around by the wind.It was not a stable structure.It did not have enough support.It needed garters to give the needed support.I think it was called Galloping Gertie  because it looked like it was galloping when the wind moved it.

# data[].attributes.body
I observed that the Tacoma bridge  did not have that much support and the wind made it go side to side.Then the part that was moving fell.Then they added gerties and then there was support.They called it Galloping Gerties because the bridge kept moving like you sit on a horse and they had used gerties to give the structure support.

# data[].attributes.body
I observed that the Tacoma Narrow Bridge did not have good structure. When we watched the videos the bridge was in stress. It was bending and practically bouncing up and down. (This  was caused by a 40 mph wind!) Later in the video they added Gerties to the new bridge  so there was more structure and it hopefully won't break. ( It shouldn't!)
They call it Galloping Gertie because it looked like it was galloping when the winds came and  caused it to move like that but after the event they added Gerties for more structure.
The structure/bridge failed because the 40 mph winds and the lack of support or lack of gerties.