# data[].attributes.body
This is an additional detail for the stalls under different situations such as rainy weathers and sunny days

# data[].attributes.body
This Concept 3 is a revamp of the earlier attempt on this concept. For this concept, the focus was to make it look strong and sturdy. This concept uses the elements of art deco from the interior of the CM building.

In the first attempt, only the front door could be opened to the left whereas the back door is by sliding up, but visually it would not look balanced.

The door for the back of the stall was modified and uses the same method of opening as the front. So visually, it would look like the door is opened on the right and left.

# data[].attributes.body
The concept is the same as the earlier attempt to this concept. The sketch shows the dimensions of the stall as well as how the seller moves around the stall:
i. opening/closing of stall
ii. putting items up in the stall
iii. interacting with customers at the stall

# data[].attributes.body
Concept development for Concept 2.
This concept focuses on symmetry and geometric shapes for it to look more ornamental.
The sketches are to show are it is when it is opened and closed. It also shows the position of the seller when resting.
It shows the side of the stall using glass door that only the seller can unlock and open.

# data[].attributes.body
The functions and the form is almost similar to the first attempt in this concept.
The things that are revamped are the steps on the ground. The steps are used to place items on top. The steps can also be moved.
The side of the stall uses glass doors which can only be opened by the seller.

The diagram shows where the seller sits, how the stall is opened/closed, seller interacting with customer & seller arranging items.

# data[].attributes.body
Concept development for Concept 1. Exploration of form using the elements from Central Market building : Ziggurat steps, theatrical elements, streamlining.

# data[].attributes.body
These are the storage of the stall. There are 2 types of storage. One of it is a open storage and a secure storage.

# data[].attributes.body
This is the rotating display that show how the item will be put up ad the placing display with applying the zygurat elements.

# data[].attributes.body
These are several display arrangement of the stall. This is to study which display arrangement more suitable to place in this stall, can attract people eyes and not blocking too much of air for the owner that sit inside the stall.

# data[].attributes.body
The 3rd concept had 3 view only which were front and both sides of the stall. The unique of the stall is it have a place for owner to sit in the stall and the rotating display. This tall dimension will be almost same with second concept. So this stall will be placed facing front and back and the activity areas will be on the 3 sides of the stall.

# data[].attributes.body
This is the display and storage of this stall. It show how the items had been placed on the hanging, magnet display and placing display. The storage is design to make owner easier to keep and organize items.There are 2 types of storage in this store. One of the storage is to store small items such as keychain, magnet, pencil and others, whereas another storage is to store big items such as bag and cap.

# data[].attributes.body
This is a few display arrangement in the stall. To study and see which display more attractive, symmetry and zygurat elements.

# data[].attributes.body
This stall concept have 4 sides of view which people can see from every angle and sides. The dimension of this stall is 300 x 160 x 200cm. The place around this stall is basically the activity areas for customer and owner. Therefore, on all the 3 concepts this stall have more activity areas and more airflow.

# data[].attributes.body
The ventilation of the stall to reduce the heat in the stall. It need more airflow in this stall.

# data[].attributes.body
The activities areas of the stall. This stall cannot withstand many people in a same time. This stall can be placed side by side that minimize some space on the environment.

# data[].attributes.body
The ways to open and close the stall. The actual size of display wall which contain placing rack hanging place and storage(below).

# data[].attributes.body
Concept 1 is a box container of stall with the size of 370.5 x 197.6 x 247.1 cm.  Applying the zygurat element on the rooftop and the theatrical element on the display wall. It have 2 sides of display wall (hanging + placing + magnet) on the right and left hand side. It have another display rack with a below storage placing on the middle of the stall.

# data[].attributes.body
First concept for the stall is there are four doors from both sides that can be open and close. This concept is suitable to place at the middle of the kasturi walk because people from both side also can see the display of the clothes. For this concept, the clothes currently in the stall can fit in this design.

# data[].attributes.body
Concept 1

# data[].attributes.body
Layout and Display

# data[].attributes.body
Concept drawing

# data[].attributes.body
Form-giving ctd

# data[].attributes.body
Form-giving

# data[].attributes.body
Layout and Display

# data[].attributes.body
Layout and display

# data[].attributes.body
Form giving ctd.

# data[].attributes.body
By using the basic form of a kampung house, I played around with the shapes to give form for concept 1

# data[].attributes.body
I decide to choose Concept 3 as my final concept as Concept 3 produce the most dynamic and disorientating form.

# data[].attributes.body
In Concept 3, the parts are interlocked and combined into single form.

# data[].attributes.body
The intention of the three concepts is to create a stall that is dynamic and disorientating in form. The three concepts are emphasized more to the way to attach the subordinate parts to dominant parts. The direction of the roof is emphasized to create dynamic and disorientating form.

In Concept 1, centralized method is used to form the stall. The dominant of the stall is attached by a number of subordinate parts.

In Concept 2, the subordinate parts is attached face by face to the dominant part.

# data[].attributes.body
Pada final konsep, saya telah menggabungkan konsep 1 dan konsep 3 saya ke dalam final konsep. Saya telah mengambil beberapa element daripada setiap konsep tersebut. Pada final konsep saya, saya telah menambah bahagian ventilation untuk stall tersebut. Saya telah cuba untuk memudahkan bentuk bagi stall tersebut. Tetapi final konsep saya masih belum detail dan masih perlu diperbaiki.

# data[].attributes.body
Untuk konsep 3 , saya menngunakan inspirasi daripada wau juga iaitu bahagian wau yang menguncup tajam ke bahagian tepi wau.

# data[].attributes.body
Kemudian saya menggunakan beberapa bentuk yang telah saya develop tadi sebagai element stall saya. Konsep 2 saya belum detail dan masih tidak dapat bentuk stall yang penuh

# data[].attributes.body
Beberapa bentuk yang telah saya develop untuk dijadikan sebagai stall

# data[].attributes.body
Bagi konsep 2 saya, saya telah mengambil beberapa element daripada wau bulan itu sendiri iaitu bahagian yang senget dan melengkung kemudian saya telah masukkan ke dalam konsep 2 saya.

# data[].attributes.body
Bentuk yang lebih cembung dan bulat dimasukkan ke dalam konsep 1 saya untuk menampakkan gerai saya symmetry dan balance.

# data[].attributes.body
Kemudian saya develop konsep 1 saya kepada bentuk yang lain tetapi masih menggunakan elemet + principle yang sama. Bentuk yang telah saya olah kelihatan lebih cembung berbanding yang sebelumnya.

# data[].attributes.body
Bentuk yang saya ambil daripada wau bulan saya masukkan ke dalam konsep 1. Dari segi ruang kelihatan agak terhad dan sukar untuk penyimpanan barang yang banyak jika saya menggunakan bentuk tersebut. Dan juga menyebabkan pergerakan pekerja agak kecil.

# data[].attributes.body
Bentuk yang telah saya dapat saya gunakan untuk dimasukkan ke dalam konsep 1 saya.

# data[].attributes.body
Element (shape) + Principle (proportion) = Composition (symmetrical)
Pada konsep 1 , saya telah mengambil beberapa element daripada visual extraction daripada wau bulan itu sendiri. Element yang telah saya keluarkan ialah bentuk wau bulan itu sendiri yang berbentuk cembung. Dan saya cuba untuk mengolah element yang saya dapat itu berkonsepkan wau bulan.

# data[].attributes.body
In this concept, the stall is designed into a non-movable stall which constructed from few simple geometry form which consists traditional malay elements which extracted from the Rumah Melayu Traditional.

The stall is 180 degree extend which ideate from the prism form, the structure consists of two doors which located at the right hand side and left hand side of the structure

# data[].attributes.body
The stall is added with various rooftop in order to design the most suitable

# data[].attributes.body
The stall consists a L-shaped table which can be used as counter and letting tenant to display their merchandise

# data[].attributes.body
Final concept saya dihasilkan daripada gabungan konsep 1, 2 dan 3.
Untuk final concept ini juga, saya masih menggunakan idea awal saya iaitu memberi ruang tambahan untuk seller. Penggunaan ruang tambahan ini bergantung kepada seller sama ada untuk dijadikan sitting area atau display space disebabkan terdapat stall minuman yang tidak memerlukan sitting area.

# data[].attributes.body
ini merupakan layout bagi rekabentuk stall saya. layout ini adalah sama untuk kesemua konsep yang telah saya lukis.

# data[].attributes.body
Untuk konsep, saya telah mengeluarkan idea di mana flat surface yang terdapat di dalam setiap stall adalah space yang boleh seller pakai untuk dijadikan display (menu atau produk) atau sitting area. Jadi idea ini telah diaplikasikan pada setiap konsep saya.

# data[].attributes.body
tetapi concept saya masih belum detail dan terdapat part yang masih perlu dibaiki.

# data[].attributes.body
ini ialah idea final concept yang saya hasilkan. saya mengambil shape daripada sketch yang telah saya lukis dan dari concept 1 dan 2. saya menambahbaikkan stall dari segi propotion, ventilation, shape, size, function dan sebgainya.

# data[].attributes.body
untuk sketch 4, saya menggunakan bentuk kotak untuk mendapatkan bentuk stall

# data[].attributes.body
untuk sketch 1, saya mengambil bentuk wau untuk diolah.

# data[].attributes.body
concept saya mempunyai inspirasi daripada wau bulan.saya mengambil proportion wau untuk dijadikan sebagai size stall. stall saya direka daripada bentuk wau.
sebelum saya menghasilkan design,
saya mencari keperluan yang mesti ada di stall seperti
1.tempat display  (menu, buah-buahan, hiasan)
2.storage (tong air, tong oren/ais)
3.bumbung/canopy
4.ventilation
5.workplace
6.meja dan kerusi (untuk cust)
agar saya dapat memenuhi keperluan pengguna.

saya juga mengkaji kedudukan atau arah stall untuk display barang
urusan jual beli dan sebagainya
kebiasaanya di bahagian depan stall di jadikan sebagai urusan jual beli
manakala di bahagian kiri atau kanan stall dijadikan sebagai tempat display barang
tempat duduk cust dan sebagainya

# data[].attributes.body
untuk page ni saya study bagaimana cara user nak susun display rack dan study ergonomic

# data[].attributes.body
The second concept took the form of rectangle. The shape of the shall is form using 1/3 proportion at the front and also side view.
It will to look lean and long / narrow.
Front view is symmetry vertically , devide into 3 level equally.

Stream straight geometry shape and line thickness is widely used in this concept.

Storage & display is enclosed and all goods is stored inside a closed space.

# data[].attributes.body
This concept applied heavily the element of proportion of 1 : 1 ( one unit, one space)
The shape aims to express a heavy upper part  and light bottom part.
The stall will look lean (front view) and long (side view).
The store is fully open at side with no partition and can pass through from both side .
straight firm line for a practical form

Side stall has more direct space for display in levels and partition following objects' measurement

# data[].attributes.body
Detail design of concept of choice.

(Functional Elements)
For this detail design, I have decided to focus on the functionality of the stall that will solve the problems that I have found during the research phase. The problems are small working space, lack of storage area, heat, hazard and poor ventilation. I aso focused on fulfilling the requirement needed by a store such as menu dsiplay area, food display area, food preparing area and food preparing area. The design choices of some features has been carefully thought. The choice of slanted roof is to prevent rain from dropping onto the walkway. Both major windows at the stall are located facing each other so the air can be circulated naturally. The windows are also pependicular to the walkway as the wind are moving parallel to the walkway.

# data[].attributes.body
My second concept took the form of rectangle. I aim the stall to look lean and long yet basic. By using the shape of rectangle, i blend in the proportion of 1: 3 to create a balance visual.
Stream straight geometry shape and line is widely used in this concept.

# data[].attributes.body
concept 3 ni idea nye customer boleh masuk ke dalam stall

# data[].attributes.body
continue

# data[].attributes.body
untuk C1 - C3 saya hanya focus bahagian display sahaja, cara susunan item, susunan tempat display shaja ada juga fikir cara nak storage. Concept 2 ni idea stall mempunyai tempat display seperti gambar di bawah. lepastu saya fikir tempat display nak susun mcm mana. saya dah consider jenis dan saiz item.

# data[].attributes.body
Saya punya konsep 2, konsep ini saya inspired by wau bulan..mempunyai bahagian meletak barang dia keseluruhan bahgian sisi kedai.. boleh meletakkan lebih banyak lagi barang dan tidak memerlukan extra additional..selain itu mempunyai bahagian meletakkan barang stock di bahagian bawah..

# data[].attributes.body
Konsep 2 ini ialah saya reka bentukkan bumbung stall itu saya amik separuh sayap dan kepala wau itu untuk dijadikan reka bentuk bumbung ini. bentuk bumbung yang melengkung ini akan membantu pengaliran air hujan dengan lancar dan menampakkan ia sebagai reka bentuk yang mengekalkan elemen tradisional Melayu

# data[].attributes.body
Konsep 1 ini saya buat reka bentuk ini adalah untuk mengekalkan elemen tradisi gaya bentuk stall ini dengan bumbung yang menyerupai kubah kerana saya cuba nak abstrak kan bahagian sayap dan kepada wau kepada bentuk bumbung stall ini. Selepas itu saya jugak cuba membuat gaya bentuk kt bahagian bawah kedai yang melengkung untuk menampakkan kedai ini lebih menarik apa bila mempunyai sudut melengkung di lantai bawah kedai untuk memudahkan ruang untuk kaki pelanggan dekat kedai.

# data[].attributes.body
oleh itu, saya keluarkan concept 2 yang inspirasinya dari concept 1 dan juga bentuk wau.
untuk concept 2, saya membuat stall mempunyai pintu dan tingkap yang boleh dibuka tutup. ia juga boleh
dijadikan sebagai bumbung

# data[].attributes.body
Ini merupakan layout view untuk stall ini. Layout yang dibuat berdasarkan data yang telah direkodkan di Kasturi Walk terutamanya stall yang menjual bag dan kasut.Peralatan yang terdapat dalam stall ini, antaranya peralatan untuk mempamerkan barangan jual melaui kaedah gantung serta platform.

# data[].attributes.body
Konsep 1 ini saya menggunakn konsep ruang anjung yang terdapat dalam Rumah Tradisonal Melayu. Konsep stall ini untuk barangan bag atau kasut.

# data[].attributes.body
Concept 1
The idea is took from bunga cempaka telur form. Actually I want to use motif flora at the wall of the stall for the ventilation and aesthetic value. I want to show the motif2 batik mostly motif flora at the stall 🌺

# data[].attributes.body
For this concept of mine, I try to give focus on the roof of the stall. So to get the roof shape, I took the vertical symmetry of the wau bulan. When it is divided to two, the roof that I am able to come up with is the one as I have put up in my drawing. However, I think I need to consider a few other aspects as I get in the detail of this concept.

# data[].attributes.body
For this concept of mine I focus on the window pane of the stall. In this concept I haven't decide on the form of the stall yet but I try to take the waist part of the wau bulan to extract the shape of my window. Besides that, I thought of using the floral motifs as a decorative and addition on the window panes. The negative spaces between the motifs will give the window panes holes for ventilation purpose. It will also add a texture to the window panes instead of just using plain color on the panes.

# data[].attributes.body
Concept 1, saya mengambil bahagian bawah wau yang berbentuk seperti bulan sabit untuk membuat bentuk stall. Bentuk pada bahagian wau sedikit curve dan bergabung dengan bulatan yang menjadi penghubung antara saiz wau yang besar diatas dan bawah. Bahagian ini, saya jadikan bumbung stall dan berfungsi sebagai pengaliran air hujan. Tempat kaunter yang berdekatan dengan tempat penyediaan barang adalah untuk memudahkan pergerakan dan memberi keselesaan kepada pekerja di stall.

# data[].attributes.body
The stall is come will shelf and hanging rod which allowing tenants to choosing their preference way to display their merchandise

# data[].attributes.body
Stall in concept 2 is a non-movable stall. The form of the structure is likely similar to the Rumah Melayu Traditional which certain elements are extracted from it.

# data[].attributes.body
saya punya konsep.. saya memilih untuk membuat stall utk barang cermin mata..untuk konsep ini saya inspiredkan dari bentuk wau . Saya menggunakan postive dan negative space dan simetri..pada bahagian atas stala,ada disediakan tempat untuk meletak vermin mata,saya memilih utk menyusun seperti itu untuk menarik customer about the display and the product.. Dibahagian bawah ialah kotak kaca yg boleh meletakkan cermin mata yang harga yang lebih mahal,untuk menjaga kualiti barang. Saya punya konsep ini untuk menampakkan tradisional modern, tradisional dari segi bentuk kedai, dan modern dari segi display.

# data[].attributes.body
konsep ini saya telah masukkan bentuk yang terdapat diwau bulan.

# data[].attributes.body
Untuk konsep ketiga, saya telah mengaplikasikan reka bentuk bumbung rumah melayu untuk gerai saya. Rekaan bumbung yang bertingkat ini adalah bertujuan untuk memberi epngaliran Udara yang baik  iaitu terdapat tingkap di bahagian antara bumbung atas dan bawah. Rekaan tingkap di sebelah pintu masuk juga direka seakan tingkap rumah melayu.

# data[].attributes.body
Untuk konsep kedua, saya telah mengaplikasikan rekabentuk pintu rumah melayu untuk stall saya. Pintu rumah melayu yang digunakan adalah pintu kayu yang mempunyai 2 daun pintu. jadi, untuk konsep ini saya telah menggunakan 2 daun pintu tetapi telah mengolah dan menjadikannya dilipat untuk membuka. Rekaan bumbung juga bertujuan untuk memudahkan pengaliran air hujan dan dapat melindungi pelanggan dan juga peniaga.

# data[].attributes.body
The idea of my second concept is inspired by the way of how traditional house being elevated to reduce heat accumulating in the house. By elevating the stall, air flows can passes beneath it and helps to cool down the stall temperature. I applied transparent windows to make customers more attracted and hence with the help of proper lightings, the bags displayed in-stall will be noticed even from outside.

# data[].attributes.body
Below shows the pattern of outlook of the stall. I try to insert the elements in the wau bulan  to the form of the stall.

# data[].attributes.body
For my third concept, I used the interior and exterior of the Central market building.

I used the wall ornamental decorations to create a tall looking building. However, or the door, it comes out horizontally which reduces the visual "height" of the stall from the front. The middle part of the stall will be used for placing items, where as the door is for hanging.

The bottom part are glass displays. The back of the stall is the exact same thing as the front. The purpose of this is because Kasturi Walk has two entrances, and has two directions of the flow of people. Hence, on both sides of the stall, will look like the front of the stall no matter in which direction they are in.

# data[].attributes.body
This is my second concept for the clothes stall. This will be more likely a portable stall and this more suitable for the smaller clothes stall and the stall that at the middle of the Kasturi Walk.
This stall also provide storage for the stocks and the hanging areas for the display.

# data[].attributes.body
This is the interior of the stall for concept 1. There will be a row of storage with sliding door for the staff to keep their stocks. The clothes will be hanging on the wall and there will also have the standing rak for hanging the clothes. The mannequin will be put at outside the stall.

# data[].attributes.body
This is the outlook of my first concept. The idea is to design a stall that can minimize the step for opening and closing. When open the stall, half of the triangular shape will become the roof of the stall with the support of two sticks. All the display are inside the stall except for the mannequin.
There will be a counter table for the worker.

# data[].attributes.body
This is my 2nd concept, the idea is the way to open and close the stall is by roller shutter door.
Below are the examples of some method of displaying the clothes in the stall.