# data[].attributes.body
You can reverese or drive straight into the spot. You stop about a spot before the spot you want to turn into, then you put your blinker on show the way you are turning. After that you make a tight turn into the 45 degree angle spot. You must park your car in the same direction as everyone else.

# data[].attributes.body
1. position your car and check/use your mirrors
2. start backing up and straighten wheel
3. begin turning your wheel left
4. check how close you are
5. adjust your position

# data[].attributes.body
1. Move as far right as possible, check any incoming cars, and signal a left turn.
2. Turn the steering wheel all the way to the left and move forward slowly until the curb or the edge of the road.
3. Shift to reverse, turn all the way to the right, check traffic, and back your vehicle back to the right edge of the road or the right curb.
4. Check the traffic and move forward from the right curb into the left lane in the opposite direction from when you started.

Make sure you never do this on a curve or a hill, plus wherever there are signs prohibitiing it.

# data[].attributes.body
1. Move as far right as possible, check traffic, and signal a left turn.

2. Turn the steering wheel sharply to the left and move forward slowly. Stop at the curb, or edge of roadway.

3. Shift to reverse, turn your wheels sharply to the right, check traffic, and back your vehicle to the right curb, or edge of roadway.

4. You can now move in the opposite direction. Check the traffic and move forward front the curb and you can now proceed in your desired direction.

# data[].attributes.attachment_link.title
Learn how to do a THREE-POINT TURN. The easiest driving lesson (by Parking Tutorial)

# data[].attributes.body
1. Begin with your vehicle a distance away from the parking space.

2. Use your turn signal.

3. Slowly drive forward. When the side mirror is even with the first line of the parking space, begin turning to align your vehicle with the center of the space.

4. Move forward slowly and stop when you are fully in the parking space.

# data[].attributes.body
1. move as far to the right as possible, then signal your left blinker
2. Turn the steering wheel all the way to the left and slowly move forward
3. Stop when you reach the edge of the road (curb)
4. Shift to reverse, check to make sure on oncoming traffic and turn your wheel all the way to the right
5. back up until necessary (about midway) then put into drive and go

# data[].attributes.attachment_link.title
Learn how to do a THREE-POINT TURN. The easiest driving lesson (by Parking Tutorial)

# data[].attributes.body
1. Decide which parking spot you want to end up in
2. Signal to warn other drivers that you are planning to park
3. Approach the parking spot slowly and sharply turn the wheel to turn into the spot
4. As you're pulling in, turn the wheel so you stay centered in the parking spot
5. Drive slowly forward until you reach the end of the parking spot

https://www.youtube.com/watch?v=vra9c29-UL4

# data[].attributes.body
1. Find your parking spot
2. Analyze your car position
3. Turn on light signal
4. Turn the wheel
5. Adjust the wheel
6. Analyze your position
7. Turn on light signal
8. Drive your car into position

# data[].attributes.body
1. Find the parking spot and line up the left side view mirror with the end of the line nearest to you.
2. Turn on your signal light and rotate the wheel slowly to the left.

# data[].attributes.attachment_link.title
Angle Parking - How to Angle Park Perfectly

# data[].attributes.body
1. Move as far right as possible, check traffic, and signal a left turn.

2. Turn the steering wheel sharply to the left and move forward slowly.

3. Shift to reverse, turn your wheels sharply to the right, check traffic, and back your vehicle to the right curb, or edge of roadway.

# data[].attributes.attachment_link.title
Learn how to do a THREE-POINT TURN. The easiest driving lesson (by Parking Tutorial)

# data[].attributes.body
1. Drive ahead of the space you want to back into until the back of your bumper is in line with the first line in the space.
2. Put the car in reverse and turn around so that you are looking through your back window. Slowly lift your foot off the brake and turn your wheel fast in the direction of the space.
3. Keep turning the wheel until you see that your bumper is inside the lines of the space. Keep your foot close to the brake pedal.
4. Turn your wheel in the opposite direction once you are about halfway into the space to straighten your wheels.
5. Push on the brake until you are almost stopped and look in your side view mirrors to see if you are inside the lines. If you aren't, stop the car, put the vehicle in drive and pull forward until you are inside the lines.
6. Turn around and look back through your back window. Focus on a point in the center of the space and continue to slowly back up until you're almost hitting the curb.
7. Stop the vehicle and put it in park.

# data[].attributes.attachment_link.title
How to Reverse Perpendicular Park! | All Star Guide

# data[].attributes.body
1. Position your car.
2. Check your mirrors.
3. Start backing up.
4. Straighten the steering wheel.
5. Begin turning your steering wheel to the left.
6. Check how close you are.
7. Adjust your position.

# data[].attributes.body
1. when turning into a perpendicular parking spot, move the car as far opposite of the side you are parking at the last moment before you turn. So if you are turning into a right parking spot, move your car to the left.
2. alright your right (or left) mirror with the line after the first car on the side you are parking.
3. turn the wheel completely to the right, and slowly let go of the brake and while turning into the parking spot, adjust your wheel as needed.

# data[].attributes.body
1. with a turn signal on slowly approach the parking space
2.line up shoulder to be even with the painted line
3.turn in and center wheels once hood of the car gets into the middle of the parking space
4.pull in far enough to make sure the bumper of the car isn't sticking out at all

# data[].attributes.body
1. Begin with your vehicle a distance away from the parking space
2. Use your turn signal.
3. Slowly drive forward. When the side mirror is even with the first line of the parking space, begin turning to align your vehicle with the center of the space
4.Move forward slowly and stop when you are fully in the parking space

# data[].attributes.body
1.  Drive ahead of the stall you want to back into until your back bumper is in line with the first line of the stall.

2.  Put your vehicle in reverse. Turn around so that you are looking through your back window, slowly lift your foot off the brake and turn your wheel fast in the direction of the stall.

3.  Keep turning the wheel until you see that your bumper is inside the lines of the stall. Go slowly when trying to do this for the first time; keep your foot close to the brake pedal.

4.  Turn your wheel in the opposite direction once you are about halfway into the stall to straighten your wheels.

5.  Apply the brake until you are almost stopped and look in your side mirrors to see if you are inside the lines. If you aren't, stop the car, put the vehicle in drive and pull forward until you are inside the lines.

6.  Turn around and look back through your back window. Focus on a point in the center of the stall and continue to slowly back up until you're almost hitting the curb.

# data[].attributes.body
1. Line yourself up with the car in front of where you want to parallel park.
2. Slowly back up while turning your wheel the opposite way of which you want to move and maneuver into the spot.
3. Keep looking back for cars and be cautious.
4. Straighten out steering wheel.

# data[].attributes.attachment_link.title
Learn how to PARALLEL PARK. The easiest driving lesson (by Parking Tutorial)

# data[].attributes.body
Use your turn signal. Slowly drive forward. When the side mirror is even with the first line of the parking space, begin turning to align your vehicle with the center of the space. Move forward slowly and stop when you are fully in the parking space.

# data[].attributes.body
1. Position the car

2. Check mirrors

3. Back up

4. Straighten the steering wheel

5. Turn steering wheel to the left

6. Check how close you are

7. Adjust position

# data[].attributes.attachment_link.title
Learn how to PARALLEL PARK. The easiest driving lesson (by Parking Tutorial)

# data[].attributes.attachment_link.title
How to Reverse Perpendicular Park with Cones

# data[].attributes.attachment_link.title
Learn how to do a THREE-POINT TURN. The easiest driving lesson (by Parking Tutorial)

# data[].attributes.body
Find a Parking Spot

Signal and Assume the Position

Check Your Surroundings

Start Reversing and Turn the Wheel

Straighten Out and Turn the Wheel the Other Way

Straighten and Align

Admire Your Work

# data[].attributes.attachment_link.title
Learn how to PARALLEL PARK. The easiest driving lesson (by Parking Tutorial)

# data[].attributes.body
Find a spot
Turn on the blinker
pull into the parking spot.

# data[].attributes.attachment_link.title
Angle Parking - How to Angle Park Perfectly

# data[].attributes.body
-Move to the outer part of the lane
-Check your rear view mirror
-Check for other cars behind or in front of you
-Point 1: Turn your steering wheel all the way to the left, approach the edge of the opposing lane
-Point 2: Shift into reverse, turn your steering wheel to the right and back up towards the side of the road you originally started in
-Point 3: Shift back into forward and steer left to begin driving in the lane opposite of the one you started in

# data[].attributes.attachment_link.title
How To Do A 3 Point Turn In 3 Easy Steps-Beginner Driving Lesson

# data[].attributes.body
Step 1

Drive ahead of the stall you want to back into until your back bumper is in line with the first line of the stall.

Step 2

Put your vehicle in reverse. Turn around so that you are looking through your back window, slowly lift your foot off the brake and turn your wheel fast in the direction of the stall.

Step 3

Keep turning the wheel until you see that your bumper is inside the lines of the stall. Go slowly when trying to do this for the first time; keep your foot close to the brake pedal.

Step 4

Turn your wheel in the opposite direction once you are about halfway into the stall to straighten your wheels.

Step 5

Apply the brake until you are almost stopped and look in your side mirrors to see if you are inside the lines. If you aren't, stop the car, put the vehicle in drive and pull forward until you are inside the lines.

Step 6

Turn around and look back through your back window. Focus on a point in the center of the stall and continue to slowly back up until you're almost hitting the curb.

Stop the vehicle and put it in park.

# data[].attributes.body
Step 1

Drive ahead of the stall you want to back into until your back bumper is in line with the first line of the stall.

Step 2

Put your vehicle in reverse. Turn around so that you are looking through your back window, slowly lift your foot off the brake and turn your wheel fast in the direction of the stall.

Step 3

Keep turning the wheel until you see that your bumper is inside the lines of the stall. Go slowly when trying to do this for the first time; keep your foot close to the brake pedal.

Step 4

Turn your wheel in the opposite direction once you are about halfway into the stall to straighten your wheels.

Step 5

Apply the brake until you are almost stopped and look in your side mirrors to see if you are inside the lines. If you aren't, stop the car, put the vehicle in drive and pull forward until you are inside the lines.

Step 6

Turn around and look back through your back window. Focus on a point in the center of the stall and continue to slowly back up until you're almost hitting the curb.

Stop the vehicle and put it in park.

# data[].attributes.body
Step 1

Drive ahead of the stall you want to back into until your back bumper is in line with the first line of the stall.

Step 2

Put your vehicle in reverse. Turn around so that you are looking through your back window, slowly lift your foot off the brake and turn your wheel fast in the direction of the stall.

Step 3

Keep turning the wheel until you see that your bumper is inside the lines of the stall. Go slowly when trying to do this for the first time; keep your foot close to the brake pedal.

Step 4

Turn your wheel in the opposite direction once you are about halfway into the stall to straighten your wheels.

Step 5

Apply the brake until you are almost stopped and look in your side mirrors to see if you are inside the lines. If you aren't, stop the car, put the vehicle in drive and pull forward until you are inside the lines.

Step 6

Turn around and look back through your back window. Focus on a point in the center of the stall and continue to slowly back up until you're almost hitting the curb.

Stop the vehicle and put it in park.

# data[].attributes.body
1. Drive forward in line with the parking space you want to back into

2. Shift vehicle into reverse and slowly lift foot off pedal while turning wheel fast and looking back

3. Keep turning wheel until bumper is inside the lines of the parking space

4. Turn wheel in opposite direction halfway in the parking space

5. Apply break and make sure vehicle is in line with the lines of the parking space

6. Adjust to fit

# data[].attributes.attachment_link.title
HOW TO REVERSE PARK - Easy Basic Steps For How To Back Safely Into A Stall Or Bay Parking Spot

# data[].attributes.body
Step 1: Find your parking spot.

Step 2: Analyze your car position.

Step 3: Turn On Light Signal.

Step 4: Turn The Wheel.

Step 5: Adjust the wheel.