# data[].attributes.body
This is my dads father day gift. It’s a baseball trophy that I made and customized. All the support still needs to come off yet.

# data[].attributes.body
I designed this on fusion360. It took not that long to do. It kept failing but I finally got it.

# data[].attributes.body
This is the gift that I decided to print for my dad. For this print I decided to make a sign that states “Best Dad Ever”. This print I made in a yellow filament and was very easy to do.

# data[].attributes.body
This is the labryinth that I decided to print. I made it in two colors which looks very cool. This print turned out very nice in the end.

# data[].attributes.body
This is the car that I decided to print. The print did not turn out very well due to the support that was used, however, I was still able to race my car. This was a very fun print to make. Adding to this I decided to make my car out of a cool pink filament.

# data[].attributes.body
This is the flexi friend that I decided to print. I made a butterfly that is pink in color to go along with the flower that I decided to print for my mother. This was a fun and easy print.

# data[].attributes.body
This is the handlebar that I decided to print. I made the handle bar purpleish blue and a regular size. This was an easy and fun print.

# data[].attributes.body
This is the gift that I decided to give to my mom. I made a imitation of a real life flower. I made the flower green for the stem, and red and pink for the flower petals.

# data[].attributes.body
This is my coaster for my dad he likes the packers

# data[].attributes.body
This fish is flexi. I even modded it in tinkercad.

# data[].attributes.body
Here is the gift I made for my dad. He is a lions fan, so I made him a lions logo.

# data[].attributes.body
This is the Buffalo Bills logo it printed pretty good and look cool

# data[].attributes.body
I am quickly finishing things so I forgot to color swap. It is Milwaukee I believe. Turned out ok.

# data[].attributes.body
I made it in fusion. I wouldn't drink out of it. It has no bottom, oops.

# data[].attributes.body
I made this car on tinkercad. Its the same as V1. The axels are too long though.

# data[].attributes.body
I made it on Fusion. I made one more ridge than the guy said because I didn't like how it looked. Somehow the bottom didn't hollow, oops.

# data[].attributes.body
This is the dog bowl that I decided to print. I made the dog bowl a yellow color and very small so that it would print quickly. This print was very easy to make in fusion as well as fun to make.

# data[].attributes.body
This is my labyrinth. It printed out good and Reads Hi Help Me! I like the design pater on the outside as well.

# data[].attributes.body
Hello, this is my wrap text around an object. I designed it in fusion. It took ~20 minutes to design. The text says “the Amazing Evan”. I printed this in silk green. It took ~3 hours to print.

# data[].attributes.body
Here is my dog bowl. It is kind of small so it must be a small dog. Maybe it is fasting.

# data[].attributes.attachment_caption
This was goiing to be my V1, but people told me it wouldn’t work. I decided to print it for my V2. It didn’t work. 

# data[].attributes.body
This is my labyrinth. It is designed to look like a tree branch so that it blends in for a geocache.

# data[].attributes.body
This is a rather complex labyrinth which I printed off thingiverse and customized with a text at the bottom saying „You made it!“. The outside is covered in diamond shapes and I also printed it in different colors.

# data[].attributes.body
This is the gift for my dad from thingiverse which I customized with his name. It’s a trophy because he’s the best.

# data[].attributes.body
This is a battery holder I made for my home since we always have a bunch of them laying around in a drawer. It’s off Thingiverse but I customized it with my last name. It took about 6 hours to print and holds AA, AAA and disk batteries

# data[].attributes.body
This is my awesome Father’s Day gift. I made this in a cool gray color, and it says “Best Dad Ever”. I think my dad will really like this and he can use it anywhere he wants.

# data[].attributes.body
This is my labyrinth. I found this on thingiverse, it is textured to be a log. This took about 5 hours to print on the Ender Pro 3.

# data[].attributes.body
Here is my labyrinth puzzle that I found on thingiverse. I modded it by putting my name on the side of it. It is fairly easy to solve.

# data[].attributes.body
This is my really cool puzzle. I printed the outside in black and the rest in mystery which makes it look really cool. I have the pattern memorized to solve it by now.

# data[].attributes.body
Hello, This is my print in place Gyro. I designed it in fusion. It took ~ 30 minutes to design. and it took ~2ish hours to print.

# data[].attributes.body
This is my awesome labyrinth that I made. I printed it in this awesome light purple color. I put Ingy on it cause why not. It took over 10hrs total to make, and I only had to print each one once. It turned out good and it is easy to solve.

# data[].attributes.body
This is something from star wars. I don't know what it is but he will so dubs.

# data[].attributes.body
This is my Father’s Day gift for my dad. It is a sign that has two circles on the top that can spin around. It printed first try and it is really fun to play with.

# data[].attributes.body
This is my labyrinth that I do not know how to open or close so it is stuck like this.  It was really easy to print but not fun to use because it hurts my brain.

# data[].attributes.body
I made this ornament for my day and it was really easy.  I did a color swap to get more practice with that and to make it more fun.

# data[].attributes.body
This is my tube frame C02 Dragster. This got me 4th place and stayed together while doing so. This took about 14 hours on an ender pro 3.

# data[].attributes.body
My dad is obsessed with trees especially maple trees so I made him a maple leaf that says number one dad on it. I didn't like the stem it came with so I took a different stem and put it on this so around the stem printed a little weird.

# data[].attributes.body
This is my V2 Co2 Car. I made things that can hold the string at the bottom. Otherwise it's pretty much the same as my V1.

# data[].attributes.body
This is my balloon car. It is the first thing I printed on my own printer. It turned out ok.

# data[].attributes.body
These are my snowflakes I made in tinkercad. The one on the left failed several times. The one on the right is supposed to be tangled lights as a snowflake.

# data[].attributes.body
Here is my dog bowl that I made in fusion 360. It was pretty easy to make and print.

# data[].attributes.body
This labyrinth is very complex. No one has completed it yet.

# data[].attributes.body
This bowl was easy to make. it took roughly 15 minutes to design. Overall, it is very cool.

# data[].attributes.body
Printed first time. It is a log typa deal. Shout out to Elijah for color swapping for some bonus points.

# data[].attributes.body
Printed first time. The bottom was a little messed up, but it still held a little water and we don't need the best for our dog. Bol

# data[].attributes.body
This is the thing that I decided to print for the at home print. I decided to make a small portable window scraper for my car. I made it white in color. This was an easy print to make.

# data[].attributes.body
Printed quick, first time. This bus did not work tho. We need a better bus driver.

# data[].attributes.body
This is my flexi cat. It printed out well and fast. I think it is super cool. However, I’m going to give it to my sister because I think she will enjoy it more than me.

# data[].attributes.body
This is my controller stand. It printed out good and will be very useful. I printed it out white so it would match the console.

# data[].attributes.body
This is m y little pig friend that I printed for my sister who loves pigs.  It was really easy to print and is very flexible.

# data[].attributes.body
Here is my second CO2 car. I put a shark fin on it to make it go faster and hopefully win this time.

# data[].attributes.body
Hello, this is my LED light bulb. I printed it in grey and galaxy colors. I designed it in fusion. It took roughly 20 minutes to design. It took roughly 5 hours to print.

# data[].attributes.attachment_caption
This is my lady birth and I colored swapped them ish and it is easy to solve and took about 30 hours in total

# data[].attributes.body
This is my CO2 powered car. It printed out good. The only thing I changed was the cartridge holder. I don’t think it will win but who knows it might.

# data[].attributes.body
Here is my flexi spider that I found on thingiverse. I think it was very well designed and I am glad that it printed easily.

# data[].attributes.body
This is the puzzle cube that I decided to print. I made it green in color. This cube turned out to be pretty hard to fit together due to the pieces being very tight with the other ones. This print was fun to make.

# data[].attributes.body
This is my dog bowl. It took like 20 minutes to make. It took just over an hour to print.

# data[].attributes.body
This is a guitar pick dish for my dad’s guitar picks. It can hold a whole bunch inside and the top lid holds two or three that he is using at the moment.

# data[].attributes.body
This is my flexi friend. It’s a monkey.

# data[].attributes.body
This is my labyrinth puzzle that has a dragon on it and its blue.

# data[].attributes.body
This is my gift to my dad. This is an old Victory Motorcycles logo I found on thingiverse and modified it into a keychain. I tried to color match it to the bike and I got pretty close, but I am still very happy with the result. This took an hour on an Ender Pro 3.

# data[].attributes.body
This is a model of the cologne cathedral which is the most popular sight in my city. I found it on thingiverse and scaled it up. It looks pretty cool but some of the high detail spikes on the roof are a little messed up and there’s like filament web between them

# data[].attributes.body
This is a my flexi Rex I printed from thingiverse. All the links work fine and are flexible. There must have been some minor extruding issues by the tail but it still looks great

# data[].attributes.body
This is the Flexi Friend I printed. This took about 4 hours on an Ender Pro 3.

# data[].attributes.body
This is my puzzle cube. It failed the first few times but in the end printed out well. It was fun to make and solve.

# data[].attributes.body
This is my Mother’s Day gift. It printed out well in a good color. I looks really cool and I think my mom will like it .

# data[].attributes.body
This is my “lady birth”. It is low key sick and none of y’all would be able to solve it except for Tyler broke it so now it’s easy. LAST WEEK BABYYY.

# data[].attributes.attachment_caption
This is my co2 car and is very light and gonna win

# data[].attributes.body
This is an ashtray for my dad, and it worked.

# data[].attributes.body
This is V2 of my car and I have no idea if it’ll be better or worse than my V1 since I didn’t race that one. I tried to make it aerodynamic and light by hollowing out most parts. I’m not sure if my intended hole for the fishing line will work since it looks clogged with support

# data[].attributes.body
This is my new and improved CO2 car. Last time it wasn’t quite long enough, so this time I made sure it was at 200. I printed it in a nice blue color, and I think it is going to do really well.

# data[].attributes.body
Here is the light bulb that I designed in Fusion 360. It was pretty easy to design and the color swap worked very well.

# data[].attributes.body
Here is the Mother’s Day plaque that I’m going to give to my mom. I didn’t realized what color I used until it was too late. I will reprint it in white probably.

# data[].attributes.body
This little guy is a fun friend and he is flexi.

# data[].attributes.body
Sick colors, not so sick print.

# data[].attributes.body
This is my shark and it worked perfectly, and has a nice blue color.

# data[].attributes.body
This was surprisingly easy to design. I decided to print it in green and orange because everyone else had realistic looking lights and I wanted to be different. I guess this could be put out around Christmas time.

# data[].attributes.body
I made this awesome hedgehog-flexi that I named Frank. He is awesome and I printed him in a nice blue color. He did not take long to print and I only had to print him once.

# data[].attributes.body
It is a butterfly knife styled comb. I was going to print what Kian made but I ran out of time so I needed to print something easy. It is fun to play with and it works well

# data[].attributes.body
This is my awesome ring holder that I made that is in a shape of a heart. It took about 3hr to print and I decided to print it in a nice blue color. I probably will end up giving it to my mom, but overall its nice.

# data[].attributes.body
This is my thing for home. This is a low poly ring I made for myself. This took 10 minutes to print on an Ender Pro 3.

# data[].attributes.body
These are the earrings I made for my mom. They have a flexible design and took about half an hour to print on an Ender Pro 3.

# data[].attributes.body
This guy will come in handy for camp when I always need a guitar pick on me.

# data[].attributes.body
This is my cat and it’s gonna win baby.

# data[].attributes.body
This wrench is beautiful. It broke when I tried to use it. It would have been great for home.

# data[].attributes.body
Here is my Japanese fountain which is supposed to constantly flow water with some tubing. I scaled down the design to 50%, so I’m not sure how good it will work.

# data[].attributes.body
My mother really likes dogs. We are not allowed to get one so I got her the next best thing. It turned out great.

# data[].attributes.body
This is a star fish. I had to break its limbs when it came out of the print because they were a little sticky. Printed first time.

# data[].attributes.body
This dragon was quite complex. It failed slightly for two segments did not connect. Other than that, it looks amazing.

# data[].attributes.body
This is my bub. It is very bright. two colors. Needed to print it twice because the first one broke.

# data[].attributes.body
This is my Batman pencil cup. It’s cool

# data[].attributes.body
This is my light bulb. It took maybe 1 or 2 or 5 times. I scaled it down but it looks great.

# data[].attributes.body
This is my gift. It’s a flower.

# data[].attributes.attachment_caption
I printed this white rose for my mom. I am really happy with how it turned out. It is really top heavy probably because the petals are so thin it is nearly 100%

# data[].attributes.attachment_caption
This is my gift for my dad and I’m going to make something else for Father’s Day but this is for at home.

# data[].attributes.body
This is the puzzle cube which I designed in a couple minutes and printed well but some tolerance must’ve been to tight since some connections don’t really fit in each other

# data[].attributes.body
This is my co2 powered car which I printed in red for speed. I don’t know how well it would do since I wasn’t here for the races.

# data[].attributes.body
This is my bedroom which is in the basement so there’s only that small opening on the side which you can barely call a window. There’s also a lot of smaller stuff on the floor which I didn’t bother to print.

# data[].attributes.body
This is the snowflake I printed in under an hour however the bed must have shifted or something because the print is a little messy.

# data[].attributes.body
This is my name plate which I managed to design in a pretty short time. It didn’t print very clean but everything was fine. One of the eyes of the smiley broke off :(