# data[].attributes.headline
I would use a magnet and an index card to remove the iron.  Then I would dissolve the salt in water.  Then strain out the sand.  Then boil the water to retrieve the salt.

# data[].attributes.subject
I would use a magnet and an index card to remove the iron.  Then I would dissolve the salt in water.  Then strain out the sand.  Then boil the water to retrieve the salt.

# data[].attributes.headline
Good procedures.  I would follow the same separation as everyone else. Would probably mass the mixture prior to separation so I could verify the quantities at the end...

# data[].attributes.subject
Good procedures.  I would follow the same separation as everyone else. Would probably mass the mixture prior to separation so I could verify the quantities at the end...

# data[].attributes.body
Use a magnet to remove the iron filings
Mix the sand/salt with water to dissolve the salt
Use a filter/strainer to remove the sand
Evaporate/boil the water away to get the salt

# data[].attributes.body
You could start by trying different sizes of strainers to see if the salt and sand are different sized granules.

# data[].attributes.headline
Use a magnet to separate iron filings.  Wave magnet above the mixture.  use a filter to separate the smaller particles.

# data[].attributes.subject
Use a magnet to separate iron filings.  Wave magnet above the mixture.  use a filter to separate the smaller particles.

# data[].attributes.headline
use a magnet to separate the iron filings

# data[].attributes.subject
use a magnet to separate the iron filings

# data[].attributes.body
place the other objects in a strainer that will allow either sand or salt to filter through

# data[].attributes.body
Filtration to separate salt and sand- use an Erlenmeyer flask, a funnel, and a filter. Mix water into the beaker with the solution
boil water to separate water and salt

# data[].attributes.headline
Use a magnet to remove all the iron filings.

# data[].attributes.subject
Use a magnet to remove all the iron filings.

# data[].attributes.body
Mix the salt and sand mixture with water to dissolve the salt.
Use a filter/strainer to remove the sand.
Evaporate/boil the water away from the salt.

# data[].attributes.headline
Work on the iron filings first.  Use magnets to separate the iron from the sand and salt.

# data[].attributes.subject
Work on the iron filings first.  Use magnets to separate the iron from the sand and salt.

# data[].attributes.headline
Get a magnetic wand and sift it through the mixture, gathering the iron.

# data[].attributes.subject
Get a magnetic wand and sift it through the mixture, gathering the iron.

# data[].attributes.body
Pour the remaining mixture into a beaker, add water, stir, until the salt is dissolved.

Get a coffee filter or cheese cloth and pour the mixture through the filter, into a larger beaker.
Collect the coffee filter or cheese cloth, and spread that out to dry. This is your sand.

The liquid that has come through the filter can be left to evaporate or can be put on a medium burner to boil away the water.  You should have a solid mixture remaining, which is your salt,

# data[].attributes.headline
1. Drag a magnet back and forth in the mixture to attract the iron filings. Place the iron filings in a beaker.

# data[].attributes.subject
1. Drag a magnet back and forth in the mixture to attract the iron filings. Place the iron filings in a beaker.

# data[].attributes.body
2. In beaker two, add 100 mL of water with a graduated cylinder. Pour the remaining mixture into the beaker and stir for 1 minute.
3.  In a third beaker, place a funnel lined with filter paper. Pour the contents of beaker 2 through the filter.
4. Remove the filter paper be careful to not spill any of the solid that it contains.
5. Now place the third beaker on a hot plate and bring to a gentle boil. Allow all of the water to evaporate. Leave the remaining solid in the beaker.

# data[].attributes.body
1) Use a magnet to isolate the iron filings.
2) Pour the mixture in a beaker and cover with water. Stir well.
3) Pour the contents of the beaker through a filter to collect the sand while catching the water in another beaker.
4) Transfer the water to a shallow pan and allow to evaporate to collect the salt.

# data[].attributes.headline
1.-Use a cheese cloth/ coffee filter to separate the little objects

# data[].attributes.subject
1.-Use a cheese cloth/ coffee filter to separate the little objects

# data[].attributes.body
2. Use a strainer to then separate the bigger objects.
3. Use a magnet to get all the iron fillings out.
4.Evaporate the water from the salt by boiling.

# data[].attributes.body
Use a magnet to collect the iron fillings.
Place the rest of the material in a shallow strainer that does not allow anything but water to pass through. pour water over the strainer, and then allow it to fill up to the brim, clearly catching all 128 ounces in a container. The salt will have dissolved in the water, where you can use heat, or natural dehydration to get rid of the water and retain the salt.  *Viloa* three grains separated.