# data[].attributes.body
OPC UA is a cross platform standard for data exchange from sensors to cloud applications

# data[].attributes.body
Structured text is one of the five languages supported by the IEC 61131-3 standard, designed for programmable logic controllers. It is a high level language that is block structured and syntactically resembles Pascal, on which it is based.

# data[].attributes.body
Modbus TCP is similar to the Modbus RTU protocol with the difference being that it uses a TCP interface that runs on Ethernet.

# data[].attributes.body
OPC UA is a platform-independent service-oriented architecture that combines the capabilities of all OPC Classic specifications into a single extendable framework.

# data[].attributes.body
Structured text is used in the PLC's as one of the programming language.

# data[].attributes.body
In simple terms, Modbus TCP/IP (also called Modbus-TCP) is an Ethernet-based Modbus RTU protocol with a TCP-based interface. An application protocol defines the rules for interpreting and organizing data regardless of the medium through which it is transmitted.

# data[].attributes.body
It is a cross-platform, open source, IEC62541 standard for data exchange from sensors to cloud application developed by the OPC Foundation.

# data[].attributes.body
it is simply the modbus RTU protocol with a TCP interface that runs on Ethernet.

# data[].attributes.body
It is an industrial communication protocol that allows data to be exchanged between products and operating systems of a wide variety of manufacturers.

# data[].attributes.body
Structured Text is PLC programming language defined by PLC.

# data[].attributes.body
Modbus TCP is an Ethernet-based Modbus RTU protocol with a TCP interface.

# data[].attributes.body
it is PLC programming language.

# data[].attributes.body
It is Modbus RTU protocol with a TCP interface that operates on Ethernet.

# data[].attributes.body
It's a standard protocol for transferring data from sensors to the cloud. It also works on a variety of platforms.

# data[].attributes.body
PLC programming can be done using structured text, which is a programming language that can be utilized with PLC.

# data[].attributes.body
Modbus TCP is the Modbus RTU protocol with a TCP interface that runs on Ethernet. The Modbus message structure is an application protocol that set the principles for organizing and interpreting data, regardless of how it is transmitted

# data[].attributes.body
Modbus TCP/IP (also Modbus-TCP) is merely the Modbus RTU protocol with an Ethernet-based TCP interface.

# data[].attributes.body
OPC UA is a cross platform standard for data exchange from sensors to cloud applications

# data[].attributes.body
Modbus TCP is essentially the Modbus RTU protocol with an Ethernet-based TCP interface. The Modbus message structure is an application protocol that sets the principles for organizing and interpreting data, regardless of how it is transmitted.

# data[].attributes.body
OPC UA is an industrial communication protocol that allows data to be exchanged between products from various manufacturers and operating systems

# data[].attributes.body
OPC UA stands for OPC Unified Architecture. It is a platform-independent, extendable standard that allows for the secure transmission of data in the industrial systems.

# data[].attributes.body
The modbus RTU protocol with a TCP interface that run on Ethernet

# data[].attributes.body
Structured text is a programming language that is used for programming the PLC, it is similar to programming languages

# data[].attributes.body
Structured Text. Structured text is a programming language that strongly resembles the programming language Pascal.

# data[].attributes.body
Structured Text is a programming language using a PLC. It has IEC standard 61131-3 and supports 5 languages for the PLC, structured text a.k.a ST or STX is one of the languages.

# data[].attributes.body
Modbus RTU protocol with a TCP interface that runs on Ethernet

# data[].attributes.body
Modbus is a data communication protocol for use with its programmable logic controllers. Modbus has become a standard communication protocol for linking industrial electronic devices and is now widely available.

# data[].attributes.body
Structured text is a programming language that is quite similar to the Pascal programming language. Programs are made up of statements that are separated by semicolons. The statements alter variables using preset statements and subroutines, which are defined values, internally stored values, or inputs and outputs.

# data[].attributes.body
It is an industrial communication protocol that allows data and information exchange between different machines from different manufacturers. This also includes sensors.

# data[].attributes.body
Open Platform Communication Unified Architecture
It is an open standard that specifies information exchange for industrial communication particularly on devices within machines, between machines, and from machines to systems in a convergence of IT and OT.

# data[].attributes.body
It is simply modbus RTU protocol with TCP interface that runs on ethernet

# data[].attributes.body
OPC Unified Architecture is a machine to machine communication protocol for industrial automation developed by the OPC Foundation

# data[].attributes.body
Structured that is a programming language that is usually use in PLC

# data[].attributes.body
It is a Modbus RTU protocol with an ethernet TCP interface. It combines a physical network, with a networking standard and a standard method of representing data.

# data[].attributes.body
Essentially, Modbus TCP/IP (also called Modbus-TCP) is Modbus RTU with an Ethernet TCP interface. This is because Modbus TCP/IP combines an Ethernet network with a standard protocol for representing data, Modbus, and a networking standard (TCP/IP).

# data[].attributes.body
The IEC 61131-3 standard supports five languages for programmable logic controllers. Structured text, known as ST or STX, is one of them. It is a block-structured high-level language that is syntactically similar to Pascal, on which it is based.

# data[].attributes.body
Structured Text is an up and coming, popular programming language used in PLCs. This language is much different than ladder logic but it allows you to do all the same things and more with a lot less space (visually and in terms of processor memory)

# data[].attributes.body
It is a programming language used in PLCs and for programming PLCs.

# data[].attributes.body
it allow user to customize how data is organized and how information about that data is reported.

# data[].attributes.body
Is a Ethernet-based OPC UA (Open Platform Communications Unified Architecture) communication standard offers the best conditions for digitalization, independent of platform and manufacturer and with integrated security mechanisms.

# data[].attributes.body
OPC UA acts as a machine to machine communication protocol for industrial automation.
For example, it acts as a bridge between PLC and HMI which allows user to control PLC with widget such as lamp.

# data[].attributes.body
Structured text, abbreviated as ST or STX, is one of the five languages supported by the IEC 61131-3 standard, designed for programmable logic controllers (PLCs). It is a high level language that is block structured and syntactically resembles Pascal, on which it is based.

# data[].attributes.body
OPC UA, or Unified Architecture, is a cross-platform standard for data exchange from sensors to cloud applications

# data[].attributes.body
Transmission Control Protocol
It is the Modbus RTU protocol with a TCP interface that runs on Ethernet.

# data[].attributes.body
structure text is a programming language that can be use for programming the PLC

# data[].attributes.body
It is a programming language designed to be used for PLC.

# data[].attributes.body
Modbus TCP/IP is the Modbus RTU protocol with an Ethernet TCP interface. The Modbus message structure is an application protocol that sets the principles for organizing and interpreting data, regardless of how it is transmitted.

# data[].attributes.body
It's a common protocol for sending and receiving data from sensors to the cloud. It's also cross-platform compatible.

# data[].attributes.body
It is simply modbus RTU protocol with TCP interface that runs on ethernet

# data[].attributes.body
Modbus TCP is Modbus RTU protocol with a TCP interface that runs on Ethernet.

# data[].attributes.body
OPC UA is like a connectivity, it helps to connect PLC and HMI together so that user can control the PLC using widget such as push button etc

# data[].attributes.body
Structured text is a programming language that is usually used in PLC

# data[].attributes.body
Structured text is a programming language that can be used with PLC for programming the PLC.

# data[].attributes.body
Known as OPC Unified Architecture, Its a standard protocol for data to be exchanged or communicated to from sensors to cloud. It is also cross platform.

# data[].attributes.body
Modbus TCP is essentially a Modbus RTU that runs on ethernet with a TCP interface.

# data[].attributes.body
OPC UA is a machine to machine communication protocol for industrial machine automation. It consists of secure communication, platform independent, and extensible design. This means that it transports information to cloud, built-in security and also customizable, letting the user add new features without deleting previous versions.

# data[].attributes.body
Structured text is a programming language that strongly resembles the programming language Pascal. Programs are written as a series of statements separated by semicolons.

# data[].attributes.body
It is a protocol for the Modbus RTU that uses ethernet through a TCP interface

# data[].attributes.body
structured text is a programming language. It is very different from ladder logic but they can do the same thing however, with lesser space used.

# data[].attributes.body
A structured text (st) is used to program the PLC. It is similar to other sorts of programming language like C. But in this case, it has some differences such as declaring variables. When you declare a variable, you are prompted to another window which then, you are able to pick which type you want the variable to be.

# data[].attributes.body
A programming language used in PLCs to outline what the PLC can do. It is very similar to other programming languages.

# data[].attributes.body
Modbus TCP/IP (also Modbus-TCP) is simply the Modbus RTU protocol with a TCP interface that runs on Ethernet.

# data[].attributes.body
OPC UA is an industrial communication protocol that enables data exchange between products from different manufacturers and across operating systems

# data[].attributes.body
It is a programming language used in plc. Structured text is a programming language that strongly resembles the programming language Pascal