# data[].attributes.body
complex processing parameter is required for curing of epoxy. insufficient heat during cure will result in a network with incomplete polymerisation, and thus reduced mechanical, chemical and heat resistance. pultrusion is not recommended as it is difficult to provide the requirement needed to cure the epoxy. the epoxy also has the tendency to stick with the wall.
-Imran Hakim B Mohammed

# data[].attributes.body
Epoxy is not favoured in pultrusion process because this kind of process need long fibre and will produce continous product. Epoxy is a kind that cannot produce in continous way because its takes longer time to produce a product. The process that suitable for the epoxy is hand lay up and spray up. Pultrusion process is cure in the equipment while method for epoxy need to be cure at room temperature. Pultrution process is simple and good impregnation because its contain resin bath with the roller while epoxy used complex method. Epoxy is not favoured in pultrusion process because tge reason as i mentioned above. Thats all from me.
- Marisa bt -

# data[].attributes.body
Epoxy is not favoured in pultrusion process because this kind of process need long fibre and will produce continous product. Epoxy is a kind that cannot produce in continous way because its takes longer time to produce a product. The process that suitable for the epoxy is hand lay up and spray up. Pultrusion process is cure in the equipment while method for epoxy need to be cure at room temperature. Pultrution process is simple and good impregnation because its contain resin bath with the roller while epoxy used complex method. Epoxy is not favoured in pultrusion process because tge reason as i mentioned above. Thats all from me.
- Marisa bt Mazuki-

# data[].attributes.body
cost for epoxy is knownly higher than unsaturated polyester and thus it cannot been used for simple production

# data[].attributes.headline
Epoxies require longer crosslinking times

# data[].attributes.subject
Epoxies require longer crosslinking times

# data[].attributes.headline
Epoxy require longer crosslinking times compared to other resin and require high temperature to initiate the crosslinking which is complicated process and highly cost.

# data[].attributes.subject
Epoxy require longer crosslinking times compared to other resin and require high temperature to initiate the crosslinking which is complicated process and highly cost.

# data[].attributes.body
-Fatini bt. Hasim-

# data[].attributes.body
complex processing parameter is required for curing of epoxy. Insufficient heat during cure will result in a network with incomplete polymerisation, and thus reduced mechanical, chemical and heat resistance. pultrusion is not recommended as it is difficult to provide the requirement needed to cure the epoxy. the epoxy also has the tendency to stick with the wall.

# data[].attributes.headline
as the material itself already expensive, using the pultrusion process will increase the cost of the process as the heated die cost can be highly expensive

# data[].attributes.subject
as the material itself already expensive, using the pultrusion process will increase the cost of the process as the heated die cost can be highly expensive

# data[].attributes.headline
because pultrusion is limited to materials that can be pulled through in strands which is include epoxy.

# data[].attributes.subject
because pultrusion is limited to materials that can be pulled through in strands which is include epoxy.

# data[].attributes.headline
Epoxy is not favored because of the complexity  resin

# data[].attributes.subject
Epoxy is not favored because of the complexity  resin

# data[].attributes.body
-thahirah-

# data[].attributes.body
Epoxy shows much better mechanical performance compared to other resin but it is not favoured in pultrusion process because the price is higher than other resin.
-nadzliyatul-

# data[].attributes.headline
Epoxy is not favoured in pultrusion because the heated die cost is high

# data[].attributes.subject
Epoxy is not favoured in pultrusion because the heated die cost is high

# data[].attributes.body
- Nur Farhana bt Shaharuddin Kalithasan

# data[].attributes.headline
Reaction rate for epoxy is slow and it has shorter port life. 

# data[].attributes.subject
Reaction rate for epoxy is slow and it has shorter port life. 

# data[].attributes.headline
Epoxy is not suitable in pultrusion process because it was poor toughness as a results of their rigid structures and also prone to trapping air bubbles or dust during this process.

# data[].attributes.subject
Epoxy is not suitable in pultrusion process because it was poor toughness as a results of their rigid structures and also prone to trapping air bubbles or dust during this process.

# data[].attributes.body
-Sakinah Saila-

# data[].attributes.body
Epoxy resins are cured by stepwise reaction hence their reaction rate is very slow, which affects the productivity of pultrusion process.

# data[].attributes.headline
Epoxy has higher tendency to bond strongly to die wall.

# data[].attributes.subject
Epoxy has higher tendency to bond strongly to die wall.

# data[].attributes.headline
Epoxies require more time for post-curing process for cross linking occurred completely to ensure resulting its optimum properties for products. Thus, the epoxies are not really suitable for this method.

# data[].attributes.subject
Epoxies require more time for post-curing process for cross linking occurred completely to ensure resulting its optimum properties for products. Thus, the epoxies are not really suitable for this method.

# data[].attributes.body
Give opinion on why epoxy is not favoured in pultrusion process.

# data[].attributes.headline
In my opinion, epoxy is not favoured in pultrusion because limited to constant or near constant cross-section component and also the price of epoxy to high rather than other resin 

# data[].attributes.subject
In my opinion, epoxy is not favoured in pultrusion because limited to constant or near constant cross-section component and also the price of epoxy to high rather than other resin 

# data[].attributes.headline
Epoxy not a favoured resin because epoxy resins is expensive material compared to other resins 

# data[].attributes.subject
Epoxy not a favoured resin because epoxy resins is expensive material compared to other resins 

# data[].attributes.body
-Syairah