# data[].attributes.body
I think if we had more time/resources

# data[].attributes.body
Period 2 Yael and group

Some of the issues that our group ran into is that the coffee filter was to big and we couldn't put it into the filter the

# data[].attributes.body
Some issues our group ran into as we designed and built our filters is that we were talking about what each layer

# data[].attributes.body
If we had more time we would have boil the water to get rid of all the extra germs that might not  been cleaned by the water filter. Some problems that my

# data[].attributes.body
1. If I would have more materials available I would be able to do our process, boil it, do it again, and then throw the water between 2 cups. This will probably make this water cleaner.
2. My group and I did not really run into any problems. Except that sometimes the dirt and bad chemicals will leak into the bottle.

# data[].attributes.body
If we had more resources, we could have had more retries for the experiment, therefore opening more possibilities, and if we had tape, it could help secure the layers for the purifier. and we could boil the water.

# data[].attributes.body
The issues that we ran into was that the paper filter at the first time ripped, therefore it did not absorb as much water as we wanted. also, I think that we should have had more different materials, like wire screens.

# data[].attributes.headline
period 8 Helvin, Eliana, Emily, Jayden Q, Sofia, Jeriell

# data[].attributes.subject
period 8 Helvin, Eliana, Emily, Jayden Q, Sofia, Jeriell

# data[].attributes.body
1. I would have been more careful about the situation, more reasonable, and would have come up with better ideas. I would have added some sort of chemical (Clorox, Purell, etc.), a pure chemical, to one of the materials to enhance it's capabilities.

2. Some issues that my group an I ran into is , "How are we going to get the water through?" or, "Is there a better way to do this?" We always tried to improve.

# data[].attributes.headline
Period 8 Naomie, Ariana, Isabella, Jadon,Anissa, Sidney

# data[].attributes.subject
Period 8 Naomie, Ariana, Isabella, Jadon,Anissa, Sidney

# data[].attributes.body
Some issues my group and I group faced was deciding what to do with the cheesecloth. I thought we should've put it on the last layer, But another fellow group member thought we should put it on the 2nd layer. But in the end we put it as the 1st  layer. After that we put the napkin as the 2nd layer so that the napkin would hold most of the dirt and other bad stuff. We put the cotton ball inside the napkin so that it would block out most of the nasty stuff. After that we used the paper that we had as a funnel so that the water could be able to pass through.
If my group had more time then we would've been able to reach our goal. Also, if we had more supplies then we would've been able to acomplish our goal as I have said before. I believe we would've been able to acomplish our goal if we had more supplies and more time. I believe if we had tape we would've been more successful so in the end our goal was not sucessful but we would be able to acomplish our goal.

# data[].attributes.headline
period 5- Jaiden - Orella, Andrew, John, Sophia, Mica,Rebecca, Alexia

# data[].attributes.subject
period 5- Jaiden - Orella, Andrew, John, Sophia, Mica,Rebecca, Alexia

# data[].attributes.body
1. Issues that my group and I ran into when we were designing the filters is when we tried to put the napkin, it fell when we put the funnel in the  bottle so we tied it.
2. Things I would've done differently if I had more time and resources is that i would use more of the cheese cotton. I think that would work because it would probably filter the water better.

# data[].attributes.headline
Period 5 : Juan, Matthew, Luc, Angello, Jiah, Noelle, Danica

# data[].attributes.subject
Period 5 : Juan, Matthew, Luc, Angello, Jiah, Noelle, Danica

# data[].attributes.body
If my group had more time/resources I think that the water that went into the water filter would have been drinkable and no one would get sick if they drink the water. If our group had more resources like more than one cotton ball or more napkins, I would think that the water would be drinkable.

One of the issues that our group ran into was that while Mrs. George was pouring in the water, the cotton ball fell into the filtered water. Another issue we ran into was that since the cotton ball fell into the filtered water, some sediments fell into the filtered water.

# data[].attributes.headline
Period 5: Michelle, Aiden , Xavier, Kayla, Leilaah, Vanessa, Camryn, David

# data[].attributes.subject
Period 5: Michelle, Aiden , Xavier, Kayla, Leilaah, Vanessa, Camryn, David

# data[].attributes.body
So one of the issue my group and I were facing, was when we first poured the water in. Everything was going well, and the water looked clear until the cotton ball fell from the funnel. It turned the water muddy and impure.

If we had more time and resources, my group would have a better filtration system. Another thing that happened was that when we poured the water, the cotton swab was like getting out of shape. When it was getting out of shape, the cotton swab automatically started to slip. When it started to slip I found that the water rushed in through the bottle.

If the cotton swab didn't fell the water could've been a bit clear but the water became yellow.

# data[].attributes.body
The issues that my team ran into were we tried to only use the cheesecloth,but my group and I realized that the cheesecloth was not as absorbant.

# data[].attributes.body
some of the issues in the group was that other people were trying to do something else but we worked through it by doing the same idea and listening to others that they said and we also tried other ideas that were risky but we all worked through the project.

# data[].attributes.headline
1. Some issues that my group and I ran into is that we tared some pieces we should not have like the paper pad. Since we teared that there was a gap. 

# data[].attributes.subject
1. Some issues that my group and I ran into is that we tared some pieces we should not have like the paper pad. Since we teared that there was a gap. 

# data[].attributes.body
2. If we had more time and more resources I think we could of used taped for fixing any rips and maybe use a scissors to cut it u correctly.

# data[].attributes.body
What are some issues that you and your group ran into as you designed and built your filters?

# data[].attributes.body
What would you have done differently if you had more time/resources available to you?