# data[].attributes.body
A bipolar transistor is made up of three elements that are linked by two junctions. The three elements are the base, collector, and emitter. Transistors are used to amplify and/or switch electronic signals.

# data[].attributes.body
A junction field effect transistor (JFET) is a type of transistor that is made up of three elements. These elements are called the gate, the source and the drain. The JFET does not need much signal current in order to turn on.

# data[].attributes.body
A metal-oxide semiconductor field-effect transistor (MOSFET) is a type of transistor that is like a JFET. However, it takes even less signal current to turn on a MOSFET.

# data[].attributes.body
Bias is a fixed voltage, applied to a device, in order to control its operation.

# data[].attributes.body
The base is the part of a transistor that is between the emitter and the collector. It changes the flow of current between the other two terminals.

# data[].attributes.body
An emitter is the part of a transistor where charge-carrying holes originate.

# data[].attributes.body
The collector is the semiconductor part of a transistor. After charge carriers leave the base, they flow into the collector.

# data[].attributes.body
A gate does the same job as a base. It is the controlling terminal that changes the flow of current between the source and the drain.

# data[].attributes.body
A source does the same job as an emitter. It is the part of a transistor where charge-carrying holes originate.

# data[].attributes.body
A drain does the same job as a collector. It is found inside FET transistors. After charge carriers leave the source, they flow into the drain.

# data[].attributes.body
Enhancement mode is an operating mode where the channel is free of charge carriers when the gate source voltage is zero. Enhancement mode transistors are “normally off” devices.

# data[].attributes.body
Depletion mode is an operating mode where reverse gate-source voltage is used to reduce the amount of free carriers in the channel. This makes the channel smaller and raises its resistance. Depletion mode transistors are “normally on” devices.

# data[].attributes.body
Bipolar Transistor has 3 different parts.
Bipolar transistor work as a normal one.
Bipolar transistor is not really complex.

# data[].attributes.body
JFET looks like a MOSFET.
JFET doesn't need so much current or signal.
JFET has 3 elements.

# data[].attributes.body
MOSFET and JFET look pretty similar.
MOSFET si more efficient than JFET.
MOSFET is smaller than JFET.

# data[].attributes.body
Bias requires a diagram.
You need to apply a bias to your circuit.
Bias is an easy solution

# data[].attributes.body
Base is a part of the Bipolar transistor.
The base is the most important part.
Base can change the flow of current.

# data[].attributes.body
Emitter is a part of the Bipolar Transistor.

# data[].attributes.body
Collector is a part of a bipolar transistor.
Collector and the base are synchronized.
Collector is a semiconductor.

# data[].attributes.body
Gate make the same job as a base.
Gate control the flow of the current.
Gate is inside a transistor.

# data[].attributes.body
Source make the same job as a emitter.
Source is inside a transistor.
The source is charged with current.

# data[].attributes.body
Drain does the same job as a collector.
Drain is inside a transistor.
Drain has the same function than the collector and the base.

# data[].attributes.body
Use the enhancement mode by your own risk.
Enhancement mode is useful in some situations.
Enhancement mode needs to be enable manually.

# data[].attributes.body
Depletion mode is another operating mode like enhancement mode.
Depletion mode doesn't requires to be enabled manually.
Depletion mode in some situations is more useful than enhancement mode.