# data[].attributes.body
How I constructed my foil dude :). I had a long piece of foil and cut it in half. Then I cut down a little ways to make a rectangle still connected to the foil. I flipped it over and I cut down the middle a little ways. Then I flipped it over again and I started to construct the head with the rectangle and the arms with the two pieces around it. Then I flipped it over again and made the legs and the feet. I made the torso and stuff after that. I hope you were able to construct this foil guy! I hope you enjoyed.

# data[].attributes.body
i built my foil guy by...
1. twisting its body
2. folding the legs
3. and crumbling its head into a ball

# data[].attributes.body
How I made my foil guy, First I made the arms by making a long strip and rapped it around my foil guy. Then I made another long strip and folded it at the bottom, then I cut it to be legs. Last is with the strip to make the body I crumbled it up on the top to make a head.

# data[].attributes.body
What i did was i cut a the foil into an h and then i foled.

# data[].attributes.body
how i mad it is i cut it into tow and folded it in to snakes and then i bent the legs and flatten out the feet so it wold stand then the body flip a half in to a anther and crumple them together and put the legs on and for the arms and the head make hole in the body and skit the arm in and do it to the other now the head royal a ball and put it in a hole yo mak in the head.

# data[].attributes.body
i took tinfoil and cut 3 slits in it and i twisted and bent it and i did it for both of them.

# data[].attributes.body
first i got a peace of tinfole and then i cut two slits and one at the bottom of the tinfouale and then crumpled up the armes then the legs then the head. After that i crumpled up the body then smushed the feet down and then i was done.

# data[].attributes.body
My first foil guy was made by cutting out the body with the feet and head connected the used scissors to make holes to the side of the body then i made the arms and put the arms in the holes on the side of him

# data[].attributes.body
I made this by curving the side of the foil square and then I cut some edges to make her shorter so when i got it to the size I wanted I starting folding i did this all without cutting the rest of the foil except for the arms. I flattened the body and then I poked a hole in the torso and i stuck the arm through it then I decided i would make her a scarf and a skirt so she can be so swagtastic and she is. Her name is Bob

# data[].attributes.body
my foil guys are mr. unicorn and weeper So how did i build them you asked i first got a peice of  foil and cut three slits two for arms one for legs and crumbled them so they were round

# data[].attributes.body
First I cut the foil in to little pieces not to small ,so after i cut the foil I like rolled the body into like a tube shape then I a little whole for the head. To make the head what I did was just mad a ball. Then I placed the head in the whole that I made, then I put a little piece like a strip. To make the arms I did little tubes then i places them on the foil figure then I wrapped the arms in little pieces of foil then I made the legs like I made the arms.

# data[].attributes.body
so jeff and Mrs. Jef are married

# data[].attributes.headline
Rebekah Zeigler (2nd Foil Figure Called the swimmer) 

# data[].attributes.subject
Rebekah Zeigler (2nd Foil Figure Called the swimmer) 

# data[].attributes.body
1. I grabbed a piece of foil and cut it so it was about 12 in. by 12 in.
2. I divided the top part of my foil into thirds and the bottom into halves.  Then, I cut the lines that I marked. (Thirds and halves.)
3. After I cut the lines, I started folding my legs and arms. Once these were assembled, I created the torso and head.
4. Once everything was assembled,  I found out my foil figure would not stand, so I made him sturdier by adding more layers to his feet so the weight was as evenly spread out as possible.

# data[].attributes.body
OK first you have to take your foil and you cut a strip and you fold it in to a foot and you do it again you make a squarer body

# data[].attributes.body
i beat the foil up and got this creature

# data[].attributes.body
I got a piece of foil and I cut slits into it then i just twisted everything. After I had the body and arms twisted I flattened out the legs.

# data[].attributes.body
How I made my foil figures:
1. I started folding and sticking the folds in slots from other folds to make them stay.
2. Then I took scissors to cut the feet.
3. Once that was complete, I folded a long strip of paper and tucked and folded it to make the arms.
4. Then I went through and did some tests to make sure everything is working right.
My first figure is the smaller one, and my second figure is the taller one. For my second figure, I wanted it to be taller and stronger, and I think that is what I accomplished. One mistake I made when making them was I made a little too much folds and that got them harder to make stand. However, in all I think they look pretty nice.

# data[].attributes.body
I constructed My foil guy by bending foil.

# data[].attributes.body
i constructed mine by bending and folding bam

# data[].attributes.body
I cut the foil into pieces that matched what i wanted it to look like and bent and crumbled and used more foil to build his arms and his head and also his legs.

# data[].attributes.body
I made my foil guy by making slits in my paper and rolling and cutting witch made my foil guy easy and stand right away i didn't have to attach the head , arms, legs , and body.
It could be made in one piece. Also i did it for my second foil guy i did the same thing cut slits for the horse and man.

# data[].attributes.body
the small one is my first one the big one is my second one with the big one i cut the way Mrs smith did it and for the small one i i cut and foled.

# data[].attributes.body
I have both of them in this picture. The first one I made is doing lunges, and it was many pieces. My second one is walking a dog. This one was made with one piece for the person but the arms are separate and the dog is also a different piece. My first one is very difficult to make stand up, but the second one is a lot easier to stand because it is one piece. First one (left) Second one (right

# data[].attributes.body
my first foil guy was first a baby old man looking thing and then after i made two. i then made the one you see now  i used mrs. smiths strategey by makeing a mine craft like dude then twisted and folding and the two heads i used for the other guy i made them into boxing gloves.

# data[].attributes.body
My second foil guy is made by making slits and crumpling up the ends. So my dog for my person  is the some just with a smaller peice of foil

# data[].attributes.body
My first foil guy

# data[].attributes.body
I built the arms,legs,and head then I built the body put holes on it the put in the parts rapped around in more tinfoil and BAM.

# data[].attributes.body
I took a piece of foil that measured 12x12 and made the top into two different sections. On the bottom an made three sections. Then I made legs and feet with the bottom section. After that with the two sections on the top I made the arms. He look a little flat still so with the extra foil in between the arms and legs and made it more of a log shape.There was just enough foil left above the arms so I could make a head. That is it

# data[].attributes.body
I just folded a piece of foil into a torso and head. Then I ripped the bottom half into legs and the top half into arms.

# data[].attributes.body
I constructed my foil figurine by cutting a piece of foil into two and then folded a body and head on. I made a head by using a piece of foil that I wasn't useing and made a ball.

# data[].attributes.body
this is Draco Malfoy like harry Potter to make her i took a pencil and wrapped some foil around it then

# data[].attributes.body
This is my first foil figure and my modified figure. (My second one is on the right.) I first got a piece of foil and molded the legs and arms. Then I molded the head and body. I moved the legs and arms around to make it able to stand and to make it balanced. I made my new foil guy taller and skinnier. It is 4 and 1/2 inches tall.

# data[].attributes.body
I started with a square of heavy duty tin foil. I cut it in half to start. Then I formed the head and the body by make a cylenderish shape.Then I made the arms and attached them. Then I added some feet. I Concluded that this was WAY better than my first foil figure who died sadly,(he fell apart).

# data[].attributes.body
I started with making the sceluton of the foil guy and started reinforcing the legs and as I went on I saw some flaws and fixed most of them but had to keep some because it held the foil guy together.

# data[].attributes.body
I started off with a foot of foil. I cut that in half. Then, I folded that in half.I then took a sharpie and I made an outline of what I wanted him to look like. After that, I took some scissors and I cut him out. I then folded the legs, and made him stand. The End

# data[].attributes.body
I made my foil guy by first, getting a 12x12 piece of tin-foil. Then I marked it with sharpie from the thirds. After that I cut slits on the sharpie lines. Then I pinched the two sides and made legs.  Then i did the same but to the top of the tin foil to make the arms. then i crumpled the last piece on top to make the head. And thats the story of how Phil was brought into this world.

# data[].attributes.body
1.First, I constructed the base of the foil guy. Next, I started to add weight to parts of the structure, piece by piece. Then I had to bend and shape him so that he would stand, and he did.
2.I revised him by making his base sturdier than it was before. Then I put him in a different shape so he could actually stand.
3.He is about 4 1/2 inches tall.

# data[].attributes.body
this is how I made my 2nd one I just spit the 2 ft one in half and I started at the bottom and went up

# data[].attributes.body
My foil guy is from UNDERTALE in the true lab! ;D

# data[].attributes.body
I shaped my figure and twisted the foil and Shaped the arms then the legs of my figure.

# data[].attributes.body
SO I started off with the foil and I cut a square. And than a I I cut a trapezoid.  Then I cut a circle. Then I shaped it like a head then it would not stand up so i cut out another trapezoid with a rectangle going up then it still didn't stand up. so then I wrapped some foil around the body then then it stood up for 2 seconds. Then fell so i put some support on the bottom of the raped foil so then he stood up.
My foil guy is 1 1/2 long.

# data[].attributes.body
i copied the video and it helped a lot and now i got a man almost doing the dab. this how i built him. 1 i cut 3 slits one on one side and two on the other. 2 I started rolling the side with the one slit witch is going to be the legs,and then i started rolling the to outer side strips on the side with two slits . 3 now i scrunched the middle strip to get a head. 4 now you can make poses and try to make him stand.

# data[].attributes.body
This is my first foil guy. He was hard to build and keep together. Even though it may not look like it but it was. But even though it was hard I did it.

# data[].attributes.body
I was basing off a picture but in the end it looks horrible but still fine.Step 1 this is what I did,Found one picture.Step 2 Try and mold it to the closest it could be mine didn't turn out as well as I wanted it to but it looks fine.Step 3 well that is just pretty much it you can draw on it but I didn't but you can though.

# data[].attributes.body
i bend and twisted a lot

# data[].attributes.body
The one on the left i did first and what i did was make all the body parts,then cut a little put it together hoping that it would stand and it did!!!!!! The second one on the right is a monster from monsters university, i had help from the videos and that helped so i cutted the foil in strips not cut fully but i cut one on the bottom and two on the top i cured up the bottom legs then i took the top corner peaces and curled them up i folded them a little and then took the top middle peace and made it into a ball then i took a different peace of foil again then i put it over the top of the foil body and put it tight  together.2. i improved the second one by making it stand better and making it stronger.my person is 4 1/4 inches long

# data[].attributes.body
I did the same thing that the video showed me to and i was enabled to make a foil figure. I cut in the certain places i saw on the screen and then i folded the foil into my desired figure.mine is an Amalgamate from UNDERTALE!!! ;D

# data[].attributes.body
I started with about 1 1/2 feet of Heavy Duty Foil.  I used scissors and cut the foil into  6 equal sizes pieces.  Each rectangle was folded in half.  Pieces were formed: Head, Torso, Right Arm, Left Arm, Legs, Feet. Folding was also used to connect pieces. Scissors were used to cut the legs and feet in half. Once placed together, I moved the hands, arms, legs & feet around till I had a pose and balance.