# data[].attributes.headline
in better circumstances i would like to have done these on big bits of fabric - laying then down on the land and painting over them - but by this point in the semester i could not afford to buy big amounts of good quality fabric 

# data[].attributes.subject
in better circumstances i would like to have done these on big bits of fabric - laying then down on the land and painting over them - but by this point in the semester i could not afford to buy big amounts of good quality fabric 

# data[].attributes.headline
after cutting the circle out of the two pieces to then applique the another piece of fabric underneath - i was left with a circle piece of fabric that was half one print and half the other with a seam down the middle - i really liked this piece of fabric - i like how it was smaller than the other ones but still the same idea and technique and i like how it was a circle - fits into my idea of having different shaped pieces - so i decided to do a similar thing to it like i did with my other pieces - stitching and adding shapes 

# data[].attributes.subject
after cutting the circle out of the two pieces to then applique the another piece of fabric underneath - i was left with a circle piece of fabric that was half one print and half the other with a seam down the middle - i really liked this piece of fabric - i like how it was smaller than the other ones but still the same idea and technique and i like how it was a circle - fits into my idea of having different shaped pieces - so i decided to do a similar thing to it like i did with my other pieces - stitching and adding shapes 

# data[].attributes.headline
separations i used in the print room - take from collages - experimenting layering different ones 

# data[].attributes.subject
separations i used in the print room - take from collages - experimenting layering different ones 

# data[].attributes.headline
technical pack - costings for whole collection and two technical packs of two final pieces 

# data[].attributes.subject
technical pack - costings for whole collection and two technical packs of two final pieces 

# data[].attributes.headline
i zoomed into different areas of some of the prints i did combining the two printing techniques - and digitized them - i really like these but i think the colour should be more subtle natural colours but i am happy with the layout of each of them i think they are all very different yet uniformed  

# data[].attributes.subject
i zoomed into different areas of some of the prints i did combining the two printing techniques - and digitized them - i really like these but i think the colour should be more subtle natural colours but i am happy with the layout of each of them i think they are all very different yet uniformed  

# data[].attributes.headline
this part of my collection i wanted to have digitally printed on a silky soft light weight tencel fabric - and the pieces will not be uniformed - the curves and cut outs in these pieces would be cut around to create interesting shapes 

# data[].attributes.subject
this part of my collection i wanted to have digitally printed on a silky soft light weight tencel fabric - and the pieces will not be uniformed - the curves and cut outs in these pieces would be cut around to create interesting shapes 

# data[].attributes.headline
i love the fluidity, texture and boldness of the lines and i want to create a similar look with these black texture lines running across the textiles 

# data[].attributes.subject
i love the fluidity, texture and boldness of the lines and i want to create a similar look with these black texture lines running across the textiles 

# data[].attributes.headline
I came across kitty sabtier and I really love her work, I love the use of these bold black lines that she uses to outline and draw the eye in to the middle of different aspects of the piece. She is particularly preoccupied with connecting lines

# data[].attributes.subject
I came across kitty sabtier and I really love her work, I love the use of these bold black lines that she uses to outline and draw the eye in to the middle of different aspects of the piece. She is particularly preoccupied with connecting lines

# data[].attributes.attachment_link.title
700 Fourth year ideas in 2021 | fashion design, andy goldsworthy art, climate change effects

# data[].attributes.attachment_link.description
May 17, 2021 - Explore Rachel's board "fourth year" on Pinterest. See more ideas about fashion design, andy goldsworthy art, climate change effects.

# data[].attributes.headline
see below link to my website - where all my final images and videos are of my final physical pieces in my collection 

# data[].attributes.subject
see below link to my website - where all my final images and videos are of my final physical pieces in my collection 

# data[].attributes.attachment_link.readable_text
Through being worn and misused, fabric may tear or become threadbare. Damaged clothing is often discarded and thrown away, but a well-loved piece of clothing may be mended or patched, extending its...

Read More

# data[].attributes.attachment_link.description
Through being worn and misused, fabric may tear or become threadbare. Damaged clothing is often discarded and thrown away, but a well-loved piece of clothing may be mended or patched, extending its... Read More

# data[].attributes.headline
i think if this were to be done physically i would print in onto an organic cotton or soft silky tencel material so it could then be used on the body as a top or trousers 

# data[].attributes.subject
i think if this were to be done physically i would print in onto an organic cotton or soft silky tencel material so it could then be used on the body as a top or trousers 

# data[].attributes.body
these ones have not been physically printed - but follow the idea of merging this painterly look with shapes incorporated but the two elements kind of blend together - creating a very organic look - these prints are from physical prints i did previously- using pigment and polychromatic printing process - but then edited the colours on it - zooming in to different areas that i liked

# data[].attributes.headline
i am thinking of creating these textiles to be used for in fashion for men or woman, creating a very fluid, inclusive, organic collection 

# data[].attributes.subject
i am thinking of creating these textiles to be used for in fashion for men or woman, creating a very fluid, inclusive, organic collection 

# data[].attributes.headline
these prints are done on organic cotton -i can see this print on the body being wide legged trousers or a long sleeves top. 

# data[].attributes.subject
these prints are done on organic cotton -i can see this print on the body being wide legged trousers or a long sleeves top. 

# data[].attributes.headline
this large piece in relation to the body i can see as being used to drape over the body as one piece - using the hole as a neck hole or arm hole, creating an abstract statement piece to be worn on the body - because of the heavier materials used i think i coat would look really nice in this fabric  

# data[].attributes.subject
this large piece in relation to the body i can see as being used to drape over the body as one piece - using the hole as a neck hole or arm hole, creating an abstract statement piece to be worn on the body - because of the heavier materials used i think i coat would look really nice in this fabric  

# data[].attributes.headline
i have been working on a mixture of sustainable fabrics many of which sources from esce tex. some more light weight and some heavier. i love this mixture of slightly different weights of fabric jointed together and different types of fabric - on the body i think this idea would be more suitable for trousers because of the thicker material. - these pieces would be more like one off bespoke pieces that would reflect these theme and create art on the body - especially with the over stitching on top they this collection would be more about the art pf the textile and less about the function.  especially with the pieces that are joined together and are different shapes - could be used in an abstract way on the body or one piece is then attached to anther to create a large pieces of intricate patchwork that could then be made to create trousers or a coat 

# data[].attributes.subject
i have been working on a mixture of sustainable fabrics many of which sources from esce tex. some more light weight and some heavier. i love this mixture of slightly different weights of fabric jointed together and different types of fabric - on the body i think this idea would be more suitable for trousers because of the thicker material. - these pieces would be more like one off bespoke pieces that would reflect these theme and create art on the body - especially with the over stitching on top they this collection would be more about the art pf the textile and less about the function.  especially with the pieces that are joined together and are different shapes - could be used in an abstract way on the body or one piece is then attached to anther to create a large pieces of intricate patchwork that could then be made to create trousers or a coat 

# data[].attributes.headline
i like these contextualisation illustrations- and i think they work quite well with the digital prints however as a whole I'm not sure if they work well with the entire project - i am thinking maybe of just contextualising my prints in my final photoshoot in the landscape - as then everything will look more natural and suit the theme and overall aesthetic 

# data[].attributes.subject
i like these contextualisation illustrations- and i think they work quite well with the digital prints however as a whole I'm not sure if they work well with the entire project - i am thinking maybe of just contextualising my prints in my final photoshoot in the landscape - as then everything will look more natural and suit the theme and overall aesthetic 

# data[].attributes.headline
hole in the fabric could be used as an neck hole, arm hole, or just exposing a part of the body.

# data[].attributes.subject
hole in the fabric could be used as an neck hole, arm hole, or just exposing a part of the body.

# data[].attributes.headline
i like this look of lots of different shapes pieces of material attacked together, creating an abstract look on the body 

# data[].attributes.subject
i like this look of lots of different shapes pieces of material attacked together, creating an abstract look on the body 

# data[].attributes.headline
tracing designs i had done previously and layering them in different ways - so i can figure out what i want to achieve in the workshop

# data[].attributes.subject
tracing designs i had done previously and layering them in different ways - so i can figure out what i want to achieve in the workshop

# data[].attributes.headline
holes could be used as arm holes or just exposed parts of the body 

# data[].attributes.subject
holes could be used as arm holes or just exposed parts of the body 