# data[].attributes.body
a framework, typically consisting of rafters, posts, and struts, supporting a roof, bridge, or other structure.

# data[].attributes.body
the top surface of a step or stair.

# data[].attributes.body
an act of describing or identifying something precisely or of stating a precise requirement.

# data[].attributes.body
A site plan is a readable map or a residential diagram depicting the plot of land on which the house sits, along with landscape topography and any exterior features or structures such as a detached garage, in-ground swimming pool, large trees, fencing, utility poles and power lines, driveways, easements, etc.

# data[].attributes.body
A sill plate or sole plate in construction and architecture is the bottom horizontal member of a wall or building to which vertical members are attached. The word plate is typically omitted in America and carpenters speak simply of the "sill". Other names are ground plate, ground sill, groundsel, and midnight sill.

# data[].attributes.body
any of the more or less distinct parts into which something is or may be divided or from which it is made up.

# data[].attributes.body
A schedule or a timetable, as a basic time-management tool, consists of a list of times at which possible tasks, events, or actions are intended to take place, or of a sequence of events in the chronological order in which such things are intended to take place.

# data[].attributes.body
a vertical section between the treads of a staircase.

# data[].attributes.body
move from a lower position to a higher one; come or go up.

# data[].attributes.body
A plot plan is an architecture, engineering, and/or landscape architecture plan drawing—diagram which shows the buildings, utility runs, and equipment layout, the position of roads, and other constructions of an existing or proposed project site at a defined scale.Plot plans are also known more commonly as siteplans.

# data[].attributes.body
Platform framing (also known as western framing) is the most common framing method for residential construction where each floor of a pole barn or conventional building is framed independently by nailing the horizontal framing member to the top of the wall studs.

# data[].attributes.body
Noun. plan, plot, and scheme mean a method of making or doing something or achieving an end. plan is used when some thinking was done beforehand often with something written down or pictured. The builder proposed a plan for a new school. plot is used for a complicated, carefully shaped plan of several parts.

# data[].attributes.body
a rounded edge of a step or molding.

# data[].attributes.body
a three-dimensional representation of a person or thing or of a proposed structure, typically on a smaller scale than the original.

# data[].attributes.body
a length of timber or steel supporting part of the structure of a building, typically arranged in parallel series to support a floor or ceiling.

# data[].attributes.body
a brick or stone laid at right angles to the face of a wall.

# data[].attributes.body
The foundation plan is a plan view drawing, in section, showing the location and size of footings, piers, columns, foundation walls, and supporting beams. A foundation plan ordinarily includes the following: • Footings for foundation walls, piers, and columns (hidden lines)

# data[].attributes.body
a scale diagram of the arrangement of rooms in one story of a building.

# data[].attributes.body
a high place or position.

# data[].attributes.body
an individual feature, fact, or item.

# data[].attributes.body
a line on a map joining points of equal height above or below sea level.

# data[].attributes.body
Building permits are a type of authorization that must be granted by a government or other regulatory body before the construction of a new or existing buildingcan legally occur. The U.S. Census Bureau reports the finalized number of the total monthly building permitson the 18th working day of every month.

# data[].attributes.body
Building information modeling is a process supported by various tools, technologies and contracts involving the generation and management of digital representations of physical and functional characteristics of places.

# data[].attributes.body
Building codes are sets of regulations governing the design, construction, alteration and maintenance of structures. They specify the minimum requirements to adequately safeguard the health, safety and welfare of building occupants.

# data[].attributes.body
Balloon framing is a style of wood-house building that uses long, vertical 2" x 4"s for the exterior walls. These long "studs" extend uninterrupted, from the sill on top of the foundation, all the way up to the roof.

# data[].attributes.body
Architectural drawing is simply the technical drawingof a house, a building or any kind of structure. ... It's a schematic representation of a building. Architects, for instance, use architectural drawing to convey and develop a design idea into a coherent proposal. Also, they use it to communicate ideas and concepts.

# data[].attributes.body
An architect's scale is a specialized ruler designed to facilitate the drafting and measuring of architecturaldrawings, such as floor plans and orthographic projections. In scientific and engineering terminology, a device to measure linear distance and create proportional linear measurements is called a scale.

# data[].attributes.body
Adaptive reuse refers to the process of reusing an existing building for a purpose other than which it was originally built or designed for.

# data[].attributes.body
the part of a roof that meets or overhangs the walls of a building.

# data[].attributes.body
a large window consisting of a central arched section flanked by two narrow rectangular sections.

# data[].attributes.body
a window that projects vertically from a sloping roof.

# data[].attributes.body
Address: Stephansplatz 3, 1010 Wien, Austria
Completed | 1160

# data[].attributes.body
Located in: Prague Castle

Address: III. nádvoří 48/2, 119 01 Praha 1-Hradčany, Czechia
Constructed in 1929

# data[].attributes.body
Location‎: ‎Winchester‎, Hampshire
between 1079 and 1532

# data[].attributes.body
Address: Achter de Dom 1, 3512 JN Utrecht, Netherlands
The tower was constructed in the late 14th century

# data[].attributes.body
Address: 1 The Cloisters, Exeter EX1 1HS, United Kingdom
Years built | 1112-1400

# data[].attributes.body
Address: Cathedral Green, Wells BA5 2UE, United Kingdom
Years built: 1176–c. 1450

# data[].attributes.body
Address: Domkloster 4, 50667 Köln, Germany

Construction started: August 15, 1248

# data[].attributes.body
Address: 16 Cloître Notre Dame, 28000 Chartres, France
Constructed in 1194

# data[].attributes.body
Address: 30 Place Notre Dame, 80000 Amiens, France
COnstructed in 1220

# data[].attributes.body
Address: Place Etienne Dolet, 18000 Bourges, France
Constructed in 1195

# data[].attributes.body
Address: 6 The Close, Salisbury SP1 2EJ, United Kingdom
Constructed in 1220

# data[].attributes.body
Address: Rue du Cloître, 02000 Laon, France
Constructed in 1235

# data[].attributes.body
Address: 6 Parvis Notre-Dame - Pl. Jean-Paul II, 75004 Paris, France

Construction started: 1163

# data[].attributes.body
A buttress is an architectural structure built against or projecting from a wall which serves to support or reinforce the wall.

# data[].attributes.body
The composite order is a mixed order, combining the volutes of the Ionic order capital with the acanthus leaves of the Corinthian order. In many versions the composite order volutes are larger, however, and there is generally some ornament placed centrally between the volutes.

# data[].attributes.body
The Tuscan order is one of the two classical orders developed by the Romans, the other being the composite order. It is influenced by the Doric order, but with un-fluted columns and a simpler entablature with no triglyphs or guttae.

# data[].attributes.body
The Corinthian order is the last developed of the three principal classical orders of ancient Greek and Roman architecture. The other two are the Doric order which was the earliest, followed by the Ionic order.

# data[].attributes.body
The Ionic order forms one of the three classical orders of classical architecture, the other two canonic orders being the Doric and the Corinthian.

# data[].attributes.body
The Doric order was one of the three orders of ancient Greek and later Roman architecture; the other two canonical orders were the Ionic and the Corinthian. The Doric is most easily recognized by the simple circular capitals at the top of columns.

# data[].attributes.body
In ancient Rome, thermae and balneae were facilities for bathing. Thermae usually refers to the large imperial bath complexes, while balneae were smaller-scale facilities, public or private, that existed in great numbers throughout Rome.

# data[].attributes.body
An altar is a structure upon which offerings such as sacrifices are made for religious purposes.

# data[].attributes.body
an ornamental structure in a pool or lake from which one or more jets of water are pumped into the air.

# data[].attributes.body
A Roman villa was a country house built for the upper class in the Roman Republic and the Roman Empire.

# data[].attributes.body
a large oblong hall or building with double colonnades and a semicircular apse, used in ancient Rome as a court of law or for public assemblies.

# data[].attributes.body
a building containing a complex of rooms designed for bathing, relaxing, and socializing, as used in ancient Rome.

# data[].attributes.body
A triumphal arch is a monumental structure in the shape of an archway with one or more arched passageways, often designed to span a road.

# data[].attributes.body
a large theater or stadium.

# data[].attributes.body
an open circular or oval building with a central space surrounded by tiers of seats for spectators, for the presentation of dramatic or sporting events.

# data[].attributes.body
an artificial channel for conveying water, typically in the form of a bridge across a valley or other gap.

# data[].attributes.body
a horizontal, continuous lintel on a classical building supported by columns or a wall, comprising the architrave, frieze, and cornice.

# data[].attributes.body
a spiral scroll characteristic of Ionic capitals and also used in Corinthian and composite capitals.

# data[].attributes.body
The middle of the column

# data[].attributes.body
The beam above a column

# data[].attributes.body
A pillar built to support a structure above

# data[].attributes.body
The tablet on the side of a metope

# data[].attributes.body
The top of a column

# data[].attributes.body
Space between triglyphs and Doric frieze

# data[].attributes.body
Decoration usually carved into walls

# data[].attributes.body
The lining around wall and ceiling

# data[].attributes.body
The triangulare structure held up by columns