# data[].attributes.body
Firstly, the type of wax to make candles is decided. Secondly, the wax is shredded into chunks or shavings .Then, a medium or large pot halfway are filled with water. Hence, the wax chunks are placed in a smaller heat-resistant container. .Subsequently, the heat is increased and stir the wax well. After that, the scent and oil-based colouring are added into melted wax. Next, the end of wick is tied around a stick and melted wax is poured into the mould. Lastly, the wax is cooled after 24 hours and the stick is removed and trim the wick.

Safety measures:
1.wear mask
2.put on glove
3.wear apron

# data[].attributes.body
01DEE20F1094
1.Firstly,the type of fax is decided to make candles
2.Secondly,the wax is shredded into chunks or shavings.
3.Then,a medium or large pot halfway are filled with water.
4.After that,the wax chunks are placed in a smaller heat-resistant container.
4.Next,the heat is increased and stir the wax well.
5.Then,the scent and oil-based colouring are added into melted wax.
6.After that,the end of wick is tied around a stick and melted wax is poured into the mould.
7.Finally,the wax is cooled after 24 hours and the stick is removed and trim the wick.

Safety Measures
1.Wear an apron to protect dress
2.Wear gloves when pouring the mixture into soap
3.Wear mask to avoid inhale the mixture smell.

# data[].attributes.body
Firstly, the type of wax is decided to make candles and the wax is shredded into chunks or shavings. Secondly, a medium or large pot are filled halfway with water. Third, the wax chunks are placed in a smaller heat-resistant container. Next, the heat is increased and stir the wax well. Then, the scent and oil-based colouring are added into melted wax. After that,  the end of the wick is tied around a stick and melted wax is poured into the mould. Finally, the wax is cooled after 24 hours and the stick is removed and trim the wick.

Safety Measures :
1. Wearing eye protector to prevent the eyes from being exposed to splashes of wax.
2. Wear gloves so that hands are not injured.
3. Wear an apron.

# data[].attributes.body
01DEE20F1089
1)First of all, the type of wax is decided to make candle.
2) Secondly, the wax is shredded into chunks or shavings
3)Hence, a medium or large pot halfway is filled with water
4) Then, the wax chunks are placed in a small heart-resistant container.
5)So, the heat will increase and the wax is stirred well
6) Next, the scent and oil-based colouring will added into the melted wax
7)After then that, the end of the wick is tied around a stick.
8)Besides,the melted wax is poured into the mold
9)Then,the wax will let filled for 24 hours
10) At last,The stick is removed and the wick will trimmed

SAFETY MEASURES:
1)Wear thick glove
2)Wear eyes equipments
3) Wear mask
4)Wear safety shoes
5)wear a proper entire
6)Wear safety helmets

# data[].attributes.body
1.Firstly,the soap is broken into the Smalley pieces using a grater,knife or food processor.Next,the soap places are melted by using a doubt boiler,slow cooker or a microwave.After that,special ingredients such as olive oil,fruit purees,herbs or even flowers are added.Lastly,the evenly mixed mixture is poured into the soap mould.

Safety measures
1.wear an apron to protect clothes.
2.wear a glove while using knife and pouring the mixture into soap to avoid burns.

# data[].attributes.body
Firstly, the type of wax to make candles is decided. Secondly, the wax is shredded into chunks or shavings. Trird, a medium or large is filled pot halfway with water. Next, the wax chunks is placed in a smaller heat-resistant container. After that, the heat is increased and stir the wax well. More then that, the end of the wick around a stick is tied. Subsequently, melted wax is poured into the mould. Next, the wax is cooled for 24 hours. Lastly, the stick is removed and trim the wick.

Safety measures
1) Wearing glove to protect our hand from candles.
2) Wearing eye protecter to avoid eyes from dry.
3) Wearing long sleeve shirts to avoid skin fron burn because the light candles

# data[].attributes.body
Firstly, the type of wax is decided to make candles. Then, the wax is shredded into chunks or shavings. Next, a medium or large pot halfway are filled with water. Then, the wax chunks are placed into a smaller heat-resistant container and heat are increased and stir the wax well. After that, the scent and oil- based colouring are added into the melted wax. At the end, the wick is tied around a stick and melted the was is poured into the mould. The wax is cooled for 24 hour. Lastly, the stick is removed and trim the wick.

3 safety measures
* Wear gloves
* Wear an apron to protect clothes
* Wear a mask when making candles

# data[].attributes.body
Firstly, the type of wax is decided to make candles and the wax is shreded into chucks or shavings. Secondly, a medium or large pot is filled halfway with water. Next, the wax chunks are placed in a smaller heat-resistant container and the heat is increased and the wax is stirred. After that, the scent and oil based colouring are added into melted wax. The end of the wick is tied around a stick and melted wax is poured into the mould. The wax is cooled for 24 hours. Finally, the stick is removed and the wirk is trimed

3 safety measure
-wear a gloves to protect our hand
-wear apron to protect clothes
-wear a mask

# data[].attributes.body
01DEE20F1090
Firstly,the type of wax is decided to make candles. Next, the wax is shreded into chunks or shavings. Then, a medium or large pot halfway are filled with water. Subsequently, the wax chunks are placed in a smaller heat-container and increased the heat and stir the wax well. After that, the scent and oil-based colouring are added into melted wax.  Next,the the end of the wick is tied around stick. Then, the melted wax is poured into the mould. After that, the wax is cooled for 24 hours. Lastly, the stick is removed and trim the wick.

3 safety measures
1. wear apron
2.wear gloves
3. use a good tools
4. wear a mask

# data[].attributes.body
First of all, the type of wax is decided to make candles.Than ,the wax is shredded into chunks or shavings. After that, a medium or large pot halfway are filled with water. Next, the wax chunks are placed into a smaller heat-ressistant container and heat are increased and stirred the wax well.
Ttan continued with the scent and oil-based colouring is added into the melted wax.iIn the end, the wick is tied around a stick and melted the the wax is poured into the mould and wax is cooled for 24 hours.Finally, the stick is removed and trimmed the wick.

safety measure:
1. glove
2. apron
3.condition of tools before use

# data[].attributes.body
Firstly, the type of wax is decided to make candles.

Then, the wax is shredded into chunks or shavings.

Next, a medium or large pot halfway are filled with water.

After that, the wax chunks are placed into a smaller heat-resistant container and the heat are increased and stirred the wax well.

Subsequently, the scent and oil- based colouring is added into the melted wax.

At the end, the wick is tied around a stick and melted the wax is poured into the mould.
Then, wax is cooled for 24 hour.

Finally, the stick is removed and the wick is trimmed.

3 SAFETY MEASURES :

1.     Wear a glove

2.    Wear a apron

3.    Make sure to use a good tools before using it.

# data[].attributes.body
MAKING HOMEMADE CANDLES

1. Firstly, the type of wax is decided to make candles.

2. Secondly, the wax is shredded into chunks or shavings.

3. Thirdly,  a medium or large pot halfway is filled with water.

4. Fourthly,  the wax chunks are placed  in a smaller heat-resistant container.

5. After that, the heat is increased and the wax is stirred well.

6. Next, the scent and oil-based coloring are added into melted wax.

7. Afterward,  the end of the wick is tied around a stick.

8. Subsequently, the melted wax is poured into the mold.

9. Then, the wax is cooled for 24 hours.

10. Finally, the stick is removed and the wick is trimmed.

SAFETY MEASURES :

Only burn candles on heat resistant surfaces.

Never place lighted candles in an area accessible to children.

Keep candles at least three feet from all flammable objects

# data[].attributes.body
01DEE20F1083
Firstly, the type of wax is decided to make candles. Next, the wax is shredded into chunks or shavings. Then, a medium or large pot halfway is filled with water. After that, the wax chunks are placed in a smaller heat-resistant container. Then, the scent and oil-based colouring are added into melted wax. Subsequently, the end of the wick is tied around a stick. Next, the melted wax is poured into the mould. Lastly, the wax is cooled for 24 hours.

# data[].attributes.body
Firstly, the type of wax is decided to make candles.The wax is shreded into chucks or shavings. Next, a medium or large pot are filled halfway with water. Then, the wax chunks are placed in a smaller heat-resistant container and the heat are increased ans stir the wax well. After that, the scent and oil-based colouring are added into melted wax. The end of the wick is tied around a stick and melted wax is poured into the mould. The wax is cooled for 24 hours. Finally, the stick is removed and trim the wick.

3 safety measures
1)Wear gloves
2) Wear an apron to protect clothes
3)Wear a mask when making candles

# data[].attributes.body
Firstly, the type of wax is decided to make candles and the wax is shredded into chunks or shavings. Next, a medium or large pot are filled  halfway with water. Then, the wax chunks are placed in a smaller heat-resistant container and the heat and stir are increased the wax well. After that, the  scent and oil-based colouring are added into melted wax. The end of the wick is tied around  a stick and melted wax is poured into the mould. Subsequently, the wax is cooled for 24 hours. Finally, the stick is removed and trim the wick.