# data[].attributes.body
We did the survey and got to fly the drone based on our code.

# data[].attributes.body
We edited our project slides and added in the script for the presentation.

# data[].attributes.body
- We got to fly the drone and I tried out the mission pad
- we finally got the flipping thing to work

# data[].attributes.body
We finished the group work code and slides (and our drone flew 8 meters up and all of us [except Ee Xin] freaked out but we laughed hard [we were probably the chaotic group at the back])
We finished the programme and I had lots of fun! :) thanks!

# data[].attributes.body
it was chaos but we got it done
we edited the slides
the group is ABSOLUTE CHAOS
i’m very sensible:)
it was fun

# data[].attributes.body
we got to finalise our project slides and test out the code on the drone to see if it works

# data[].attributes.body
https://drive.google.com/file/d/1Q1Fwl3AXDH8y_GjrC1Nsw6EZ20vYBuWK/view?usp=drivesdk

# data[].attributes.body
We tested our codes for the project. Our code works in theory but it didn't really work today because of the wind. However our presentation looks nice now so that's nice.

# data[].attributes.body
today, the trainer let us fly our drones and we worked on the final version of our project. It was really fun testing our code and finding that it works! Today is our last lesson and i think i learned a lot :)))

# data[].attributes.body
Today is the last lesson of this programme. I have learnt a lot, including how to code the drone. I hope I will get the opportunity to fly a drone again. I have enjoyed myself in this programme and made new friends :]

# data[].attributes.body
We tested our code and it worked, except there is quite some wind which made the drone unstable. We took a video of it and included it in our slides.

# data[].attributes.body
Today we figured out and tested our code for the project and managed to fly the drone successfully from one mission pad to the other one. It was fun flying the drone.

Link to video:
https://drive.google.com/file/d/1Q1Fwl3AXDH8y_GjrC1Nsw6EZ20vYBuWK/view?usp=drivesdk

# data[].attributes.body
We tried flying the drone for the first time today. It was cool even though our drone ran out of battery

PS Flips are fun

please ignore the earlier post, it is glitched and I cannot remove it or arrange it in the right order

# data[].attributes.body
we finished the program and tried it on the drone, it worked really well and we spent the rest of the lesson testing out mission pals

# data[].attributes.body
E amended the slides based on feedback and made them more aesthetic

# data[].attributes.body
Today’s lesson was physical and we finally completed our project with a video of how our drone would work in real life. I really enjoyed the lessons.

# data[].attributes.body
I didn’t attend because of study block

# data[].attributes.body
We continued discussing about the project and started on the slides

# data[].attributes.body
I discussed the project and problems with my group mates, it was very fun and i enjoyed spending time with them.

# data[].attributes.body
This was our first introductory lesson. Flying the drone sounds fun

# data[].attributes.body
The last drone lesson! Today we simply played with the drone because our group was done with our prototype. It’s sad that we have no more drone lessons but I’ve learnt a lot more about drone programming/coding!

# data[].attributes.body
We learnt about the design and the process and met some teammates and found how to prototype the maachine

# data[].attributes.body
Today we finalised the project. I helped draw a prototype design which was rushed but I was happy with the end product of the group

# data[].attributes.body
We learnt about the mission pads and it was fun to learn about the XYZ

# data[].attributes.body
The drone class today was online - zoom. We were working on the presentation on how drones can help mankind. The presentation is almost done as we spent many weeks doing it. We learnt the five stages of design thinking in order to work more efficiently on the project. For each week, we did a different part of the design thinking for the presentation.

# data[].attributes.body
We finally had a face to face class so we could test out our code on the drones. We tested and modified our project code to make it work more accurately.
We experimented with using mission pads to fly the drone.

# data[].attributes.body
We were doing the project today, and we drafted the final prototype

# data[].attributes.body
We finished our slides before the lesson so we just made the first slide more decorative to capture people's attention.

# data[].attributes.body
We measured the lengths of our classroom windows because we wanted to code our window cleaning drone based on those measurements. We also finished the coding.

# data[].attributes.body
We decided that the window cleaning idea was the best we could think of, so we used it. We discussed how we will attach the cleaning materials onto the drone. Ie, one side have wet sponge attached, the other side have cloth to wipe. The drone will rotate to clean respectively.

# data[].attributes.body
We thought about some ideas for our project but still could not think of one. We thought of window cleaning, but don't know if it's feasible.

# data[].attributes.body
We were doing the presentation slides today via zoom. I enjoyed it

# data[].attributes.body
We added content to the Google slides

# data[].attributes.body
We continued discussing about the problem we want to solve and refined our solution

# data[].attributes.body
We brainstormed ideas for our project and discussed some prototype ideas

# data[].attributes.body
I learnt about this history of aeronautics and mechanisms of a drone/plane

# data[].attributes.body
We got the chance to fly the drone again and we finally managed to let it do a front and back flip

# data[].attributes.body
Experimented with the drone and tested out our code for the project.

# data[].attributes.body
We continued reviewing our project and added the situation where we want to apply the drone to (a farm)

# data[].attributes.body
We worked on the code and drawing out the diagram for how the drone would fly. We completed the slides and completed the grading.

# data[].attributes.body
Today we reviewed our project slides. We added a content page, a thank you slide, a few more photos and extra research.
If I'm not wrong, this was our second last session and the last session will be on 17 August.

# data[].attributes.body
*zoom lesson*
We did group work today. Georgia, Kylie and Ee Xin stayed in school and did the designing of the drone + building on the whiteboard while I went back home (because I needed to prepare for ecca [like I had to set up stuff in advance]) and searched for photos on the internet to put in our slides, as suggested by the trainer. We are mostly done, we're just left with shortening our sentences and making the slides look ~visually appealing~, as suggested by the trainer. I learned to have patience as it is not easy to communicate over zoom. Yay we're almost done :)

# data[].attributes.body
My group and I finalised our slides and made it more attractive so that people will be interested in our product. I can’t wait to see the results and final gradings :)

# data[].attributes.body
it was zoom again, so we made edits to our slides, came up with a scenario (eexin was beyond 🤬) for the drone
so using the scenario, we calculated all the measurements and wrote out a code with numbers on the board

# data[].attributes.body
we continued working on our project and amended it based on what feedback we received. for example, our slides needed to be more aesthetic and the fonts etc.

# data[].attributes.body
i did not attend lesson 10

# data[].attributes.body
We touched up on our project slides and added the scenario example for the coding of our drone.

# data[].attributes.body
basically it was online class, but i went over to 104 to do the coding with eye in and kylie. i found that it was kinda challenging cos our numerical values to be input into the code was subjective to the height of the building, so we ended up using a lot of algebra.
kylie’s good at math:)

# data[].attributes.body
Today, Valerie and I continued to discuss and complete the project, and touched up the slides. We also added in the code for the drone.

# data[].attributes.body
Last lesson before we have to submit our projects, I’m excited! We finalised some stuff

# data[].attributes.body
Today is our final lesson before submission of the final project. I am a little nervous and worried, but excited at the same time. I hope the project succeeds!

# data[].attributes.body
We discussed the project again and completed the slides. We had to insert the code into the slides, so we measured the classroom windows in order to code the distances.

Also, our problem statement is: Cleaning windows in high-rise buildings is dangerous and poses safety risks to people.

# data[].attributes.body
we came up with the programming for the drone and used tons of algebra

# data[].attributes.body
we filled in the last of our project and sketched out the model of the prototype

# data[].attributes.body
2. All finalised project slides to be submitted by Friday, 30 July at 10pm.

3. Rubics for grading fo this Drone Programme:

# data[].attributes.body
1. Everyone to submit your grading of your grp members and reason (for the grade) to the Grading folder:

# data[].attributes.body
“Online Zoom lesson today”
We started on the code today, and we are thinking of making our drone “spiral” around the building… I hope we can come up with a proper code… so far we only talked about the take off, up and go xyz m-1, land…

# data[].attributes.body
A lot of algebra and made a program for drone

# data[].attributes.body
- Touched up the slides for the project
- Did the grading rubrics

# data[].attributes.body
We continued on our project and the teacher told us what our presentation needed to included.

# data[].attributes.body
- Discussed about the prototype for the drone project

# data[].attributes.body
We finalised our group project slides and graded our peers. We also gave parts to each group member to present the slides.

# data[].attributes.body
absent

# data[].attributes.body
absent

# data[].attributes.body
Missed

# data[].attributes.body
It was interesting to learn about the x,y and z to code the drone and how to use the mission pad.

# data[].attributes.body
I met up with my group to discuss our project and I learnt on the ideation, prototyping and design thinking for our project.

# data[].attributes.body
we were told to do a group project and present on a topic to make drones useful to society. it was fun to do research on how drones can benefit society while abiding by guidelines. prototyping is fun?

# data[].attributes.body
Today we discussed our group project. My group is almost done with the prototype! So excited for the presentation next lesson :)

# data[].attributes.body
The girls discussed about their projects.

Next lesson meet up ( 27 July) - presentation of project. Venue will be in one of the rooms. TBC by Mr Chua.

Final presentation slides need to be submitted by 26 July to the link provided for each group.

# data[].attributes.body
we worked on our project further

# data[].attributes.body
*Physical lesson*
We (me and Georgia) discussed (did the Ideate segment) and Ee Xin and Kylie did the drawing of our prototype in Procreate.

# data[].attributes.body
We did group work today and discussed on the drone prototype.

# data[].attributes.body
Silence. *caw caw caw*

# data[].attributes.body
Project discussion - we finalised our group's problem statement, discussed more about the prototype and started work on the presentation slides (due 27 July).

# data[].attributes.body
Finalised an idea for the Drone Programming which is how to reduce workplace incidents. It was quite awkward as nobody was talking despite me knowing someone who talks a lot. It was mercifully weird but I am glad that we got something done. :)

# data[].attributes.body
i was absent but I know we have a group project so I feel thats pretty cool

# data[].attributes.body
We learnt about XYZ and mission pads as well as about new codes that i found interesting and would like to try in real life.

# data[].attributes.body
we started brainstorming ideas on how the drones could be used and applied the design thinking process

# data[].attributes.body
I was not present for lesson 5 because of study block

# data[].attributes.body
I enjoyed flying the drone as well as the programming as this may be able to help me in the future

# data[].attributes.body
We went through some ideas for the drone prototype and commented on them. We also did group work and decided on an idea, using google slides to improve on it.

# data[].attributes.body
we discussed our project and came up with problems and problem statements and solutions using drones with my group mates joon yi and sreya. it was very fun and i hope that i will be able to come up with a solution to help others with drones :)

# data[].attributes.body
First lesson after June holidays. Today we discussed our project in groups of 4. My group has 2 year 1s and 2 year 2s. First time doing a cross-level project. Hope the project succeeds :]

# data[].attributes.body
Things learnt
- the ideation, prototype and test stages of the design thinking process
- got to meet with my group mates to decide ok the problem we want to solve

# data[].attributes.body
Split the class into groups of 4. Total 6 groups. Links to upload file to their group folder are given to all the groups.

Group 4 & 6 still owe me the problem statement.

Next lesson meet up (13 July) - Need to do the project till drawings of prototype.

*Project will be graded

# data[].attributes.body
We discussed the technology for good project in our groups of 4 and came up with some possible ideas (problem statement TBD)

# data[].attributes.body
We discussed about what to do for our project and came up with ideas for the problem statement and solutions.

# data[].attributes.body
Today, we split into groups and discussed about our problem statement and solution for the Drone Program.

# data[].attributes.body
Hello girls,

To date, I received the project from only 8 of you.

# data[].attributes.body
1) Lee Min Jia
2) Ezann Yeap

Updated on 28 June 2021:

3) Clara Poh
4) Dana Heng
5) Valerie Khoo
6) Georgia Ong
7) Faith Lee
8) Natalie Ng

Updated on 29 June 2021:
9) Joy Sim

# data[].attributes.body
Girls, attached is the link for the slides: https://drive.google.com/drive/folders/1gB1PyUiZ4t8Z1Oymr5NHormHLCa-Q8HL?usp=sharing

Let me know if you cannot access the slides or the videos.

# data[].attributes.body
Zoom class. 5 stages of design thinking process and details on their project - Technology for Good.

The girls will be working on the 1st 2 stages of the design thinking process (Empathise & Define) individually.

They will do their research on Goggle docs and presentation on Goggle slides. They will need to share their file with me. My email: roselyntan.11@gmail.com

# data[].attributes.body
we learnt how to use xyz to allow the drone to move in a particular direction and angle

# data[].attributes.body
I combiend lesson 1 and 2 into one but I sould say that it is fairly unique to lean about left yaw and right yaw and also about the lift, thrust, push as I have learnt previously.