# data[].attributes.body
The whole process of making it took me around 2 hours.
I had to think in a way to after making the part, make it to sustain in my body by it self, so I did in a way that it would perfectly fit in my body, making it just wearable by me. Also the flip flop was hard to make in a way that the paper wouldn't rip off.
In the end it all worked out just fine and I ended up naming my outfit as Hawaiian Gladiator Outfit.

# data[].attributes.body
This day was the day that we had to put all the pieces togheter, I manage to finish up all the zine's for the fair and also the poster. Had a fell issues with the printing machine, then I went to copyset and it worked all fine. In the end I had 11 copies of the "How to Breath", 5 copies of the "Trancendence" and 5 copies of the A3 poster "No Transpasing".
We also had to already make our portifolio for the assessment, we had until 17PM to deliver it. Managed it. Be as God wishes.

# data[].attributes.body
Used the whole day to catch up my padlet, both reflection as research!!

# data[].attributes.body
I digitalize the drawing and turned it into A3, made the resolution higher then turned it into bitmap. Went to the Copyset, made 2 prints in a
vegetal paper, then went back to EBAC, to the print room and exposed my screen, unfortunetly it didn't work, there wasn't paint enough to block the light.........
I also printed 10 copies of my How to Breath at Copyset.

# data[].attributes.body
In this day I realized that my idea for the Zine wasn't going to work, because I wasn't going to have enouth time to finish it, so had to think on how I was going to change my plans, so I decided to stick on the first idea that we had to meke, the How to. I remaked it and changed the format, just so it would look smaller. I also had the idea on making a poster out of one of the pages I made on the previous Zine idea and turn it into a serigraphic poster.

# data[].attributes.body
In the morning part of the day we had a Adobe workshop with Leopoldo. The rest of the day I used to make my Zine

# data[].attributes.body
This was a working day, I worked on my Zine the whole day.

# data[].attributes.body
First part of the class we had to brain stomr on 30 ideas for our Zine and after we went to the Casa Plana.
In the afternoom we had Henry's professional practice lecture

# data[].attributes.body
A new project started, Self-Publish, in the first part of the class we learned a bit about Zine's, and did a simple Zine format, after we were asked to do a How To Zine in that format. That was the whole morning.
In the afternoom we a Introduction to EBAC BA Programmes in Auditorium with Jaygo Bloom and Kevin Fene.

# data[].attributes.body
In the morning was going to be the protest, since my protest was digital there wasn't much I could do.
In the afternoom we got the classroom ready for the crit, they split the group into 2, I went in Henry's group. Each person got a plastic cup to leave in frot of their work and some pieces of paper to write a comment and leave inside the cup. After we had t take one comment the someone left in our cup, read and answer it.
My personal opinion about this project. I didn't enjoy doing it at all, I personally don't think the idea os protesting about something works, because in the end there is no right or wrong, and a protest is always point to only one side of a coin. So I felt really bad on having to make a protest myself, I only ended up doing something to not get a referral.

# data[].attributes.body
This was going to be the day in whick I would work on the animation. Took the pictures and some takes in the ChromaKey Room, and went streight to the pc lab to start, I mostly used the Adobe After Effects software, but also had to work on some images in the lighthouse classic and photoshop. All the final editing I did on the Adobe Premiere. it ended up working all fine.
Since I don't take part on anytipe of social media I decided to post the video on a very old youtube channel I have.

# data[].attributes.body
This day started with a short intro with Roger, about what a Graphic designer might face, like doing a publishing for a very bad company. For me personaly it's a very hard thing to judge, like, if I was a Owner of my owen work, I would probably be able to choose what I wanted or not to take part, but if I worked on a company and they asked me to do this work, and if I refuses meaned I would lose my job, I would probably do it.
In the afternoom I started thing on how I would perform my protest, and I decided I would make an animation. Got all tha planning and skatch going to start doing it in the next day

# data[].attributes.body
We had a introduction with Roger and Lauren about grid and that we don't necesserily need to follow then, after we were asked to make a poster for the project, I decided to make it digitaly, i had the image and a few ideas on how I was going to make it, so it ended up being really straight forward. I worked on two posters during the whole day.

# data[].attributes.body
Today the day started with the lecture from Bijari, he talked a lot abou his protests and gave us some examples of some posters that he did previously.
After we had a introduction with Michael to the new project with some pratical exercises.

# data[].attributes.body
Missed this day

# data[].attributes.body
We started the day spliting the group in two to have a workshop with Monique on how to make a letter made out of cardboard, really nice! After it was time to put our hands into work, I used the whole morning to make the structure of my latter made out of wire and making a structure inside to put the lamp, after made I seted the lamp inside, manage to make everything in time.
In the afternoom I started glueing the synthetic cotton and covering everything, only leaving a part of the back where I puted the lamp. After all of that was done I painted the latter with colour spray cans and finished just in time.

# data[].attributes.body
This day we were introduced to another step of the Movable Type project, in which we were going to have to make a 3D type with at least 30 centimeter of height using any tipe of materials, I got the latter A, since I was the first in the calling list, But i liked, I knew it was going to be challenging, so we stayed the whole morning brainstorming on ideas of what tipe of material we were going to use and the place we were going to place the letter, reporting everything in our scatchbook.
After lunch we were asked to have at least 5 different ideas using different materials and also to already start making a small prototype of our latter.

# data[].attributes.body
This day we went to the Cemiterio São Paulo, where did the type safary, we had to gather all the letters from the alphabet, and them we were also asked to gather all the alphabet but from things that were not man made types, like cracks on the floor, perspective in the branches of a tree...
In the afternoom we had Michael's professional practice lecture, where he told us about some of his previous works and how he ended up being a teacher. After his lecture we got some templates where we were supposed to make our on font.

# data[].attributes.body
This day I got late to the morning class, so I stayed at the pc lab doing the Movable Type Research.
After lunch we presented to Monique our reaserch and then we had to make a letter using 5 by 4 grid. Filipe Grimaldi was there, a shame that I lost his lecture from the morning class.

# data[].attributes.body
Crit Day.
We used the whole morning to organize all the work we made during the week, and afterwards to organize in a place where we were going to display it. Them we got some post-it to write crits on our classmates works, in which 2 haded to be to someone we don't know very well and one could be for someone we know well.
After lunch we started with Cezar's professional practice lecture, where he showed us all of his previous works. After his apresentation we went all together through everyones works, where Cezar and Carlos would listen to our apresentation and give their opinion on it, we would read read one post-it from someone and answer their question.

# data[].attributes.body
This day we were supposed to turn our pictures in a 3D object, we had a apresentation with some examples and I decided to make a 3D head using thin slices of paper and hot glue, after it was finished I did some addons, like a cigarette, a hat and some glasses. Really liked the final result.
In the afternoom we kept working on our objects and after we organized the classroom to make an exhibiton with everyone's 3D objects.

# data[].attributes.body
The day started with Roger's professional practice lecture, he told us a lot about his previous work, but the one I most enjoined was his bookstore called POP, in which would constantly have exhibitions from different artists and he also had his studion there, wherer he could have his privecy to let his creativety run wildly. Another work I also really liked was called "Outros Brasis", where he would register places that he found the names interesting, it is still a work in progress, but I really liked the idea.
After Roger's lecture we started to destroy the 25 old images we gathered to rearrange in 4 different and specific ways, one was additon or subtracting, the other was sewing, the other cutting and the other freely. I've managed to make them all in a straight forward way... And I liked the results.
In the afternoom we had Alex's professional practice lecture where we learned more about his past works before becoming a teacher. After his apresentation we went to the mac lab to learn how to edit RAW files using the Adobe Classic Lightroom.

# data[].attributes.body
The morning started with Lauren's professional practice lecture, she has mainly done animation using stop-motion and gave us her explanation why stop motion. She told us that through life drawing she improved a lot on the making of her characters that she uses to make the stop-motion animations, she also did monoprint works and then did a animation with the Adobe After Effects with a monoprint. All found amazing all of her work, really inspiring, I can se how she puts all her internal questions in her work, it's nice to see that, gives a lot of mening in what you do.
After Lauren's apresentation we started on working in making the contraption for our filters, I decided to use the lid of a plastic water bolttle since the camera I was going to use was my phone's one, its worked all fine till when I saw that i didn't really had a easy way to put the filter with a distance from the camera to give it a diferent effect, so I had to change my contraption to the tip of the water bottle just so I could use the lid to set the filter with some distance from the camera, it worked great.
In the afternoom we had Carlos's professional practice lecture, he told us about his work with Zini and how much he liked the idea to make a work with so little expenses, he even collected paper that people throwed away and reused to make his Zines, he also told us about his exhibitions, I really liked the idea of one of his exhibitions in which his work was supposed to be taken away but it wasn't explicit, so he would have to wait until someone started doing it just so erverybody else would also do it and in the end of the exhebition the room would be empty. Really inpiring too.
After we started working on the filters and also taking pictures using them, and we had to print at least 5 pictures we liked the most and glue in our sketchbook.

# data[].attributes.body
This day started with Solange's professional practice lecture, in which we got know more abou some of her previous works and her tragrctory on how she became an artist. After her lecture we had a discution about the new project called "Beliving is Seeing", in this day we already had to have with us the 60 pictures from the first part of the project, and in the rest of the morning class we made a circle and had a kind of crit.
After lunch we had Monique's professional practice lecture, in which she also told a lot about some of her previous work, some in which I found very interesting, like the Sericleta, where she rides a bicycle where you can get a serigrapy print made by her.

# data[].attributes.body
Got late for the morning class, so I had to wait till after lunch to start catching up to the morning content.
When I finally got to work I only manage to organize all the pictures to make the book, but couldn't finish, will have to do it at another time...

# data[].attributes.body
We had a Crit induction with Michael and Roger. In Michael's presentation we got to learn deeply the meaning of crit, in which is the most used tool in art and design educational contexts, helping the students through their tutors to develop their critical, analytican and evaluative skills.
Later on in the afternoom we had the time to put all the theory into practice doing the crit from the end of the project The Collector, we had to saparate two of our projects, the one we thought was the most successful one and the one that was the least successful one, we got to tell our opinion to the works from our classmates and work out our crit skills, I personally don't like this practice, maybe because I still haven't completely undestood how it is really supposed to work...

# data[].attributes.body
Missed this day

# data[].attributes.body
I started this day in group that would go with Cezar to the print room to learn with Marcelo the assess risk of all the tools we were going to have in our disposal, like, tico-tico, furadeira, Dremel, serra. So we were instructed to alwayes use mask, protect glasses, closed shoes and depending on the equipment to use the right attachment to what we want to do, like if you are going to make a role on a wood plank you should use a screw that is for wood, and so on. After we had the freedom to use the tools to destroy three of our objects.
In the afternoon we had a lecture of a friend of Solange about Origami, we learned many names of different tipes of foldings, I founded it really incredible to find a kind of "algorithm" in paper folding, if you really get to learn it you can just fallow a intruction and be able to do a complex Origami! After he teached us how to do a basic tipe os folding, in which I alredy new how to do it, but still was nice to get to do it again, the more I do it the better I get at it... After we were asked to make and outfit using the drown shape of our destroyed object, I had a lot of troble doing it! Couldn't manage to fit the parts and make anything.

# data[].attributes.body
In this day I started with Lauren, we learned how to chroma key and make a Gif with it using our own object, I would say it was one of the nicest thing I ever learned how to do, even if it was the first time I was doing it I think my gif ended up beeing very successful! Still, it was very challenging to do what I wanted to do, because I had to make a layer between the green screen and the footage of the object to make another video apear inside the candy paper, but in the end it worked all fine!
After lunch we had class with Alex, in which we had a induction on the Adobe Premiere that in my opinion is one of the most important programs to know how to use, because editing is a skill very much used in mostly everything, using footage, pictures, stopmotion, etc. I had never been able to learn how to edited edit videos and in this class we got to learn the basic(in which was already a lot!), managed to edit my video from Parque Ibirapuera, but still have a lot to learn. But in the overall was really good!

# data[].attributes.body
We had a research introduction with Carlos, where we learned better ways to look at things and see how it can halp us in any way to improve our way of looking at everything and seeing how it can be helpful to solve any problems we might be facing

# data[].attributes.body
Today we had lessons with Roger and Lauren, we first whatched Roger`s apresentetion on the colour theory and afterward we got a test to do about it, and in the the left before lunch we did some experiment, to try to find the black color only using blue, yellow and red, it was very hard. After lunch we did some of the technique we learned earlier and afterwards we had to find the 3 tones of our owen objects, it was nice but I didn`t fell so ecxited doing it, still got some learning out of it.

# data[].attributes.body
This day we also has splited groups, so first i went to the print room with Monique and we used the photograph we produced with Alex in the other day, we printed in 15 A2 white pappers and 4 in different collors, in was nice, but I already new how to do everything, still... it was nice. After lunch we had lessons with Carlos and he taught us monotype, something that i had never done before, and it was really amazing, it was a completely new way of making art, with monotype we can do so many different things in some many different ways using differen materials to get different shapes and textures! we produced many works, everytime trying something new. This was something that I will defenetly try to do it again.

# data[].attributes.body
We had the whole day lessons in the labs, both Mac and pc lab. They spreaded us into two groups, so I first went to the PC lab with Alex and learned many tecniches on the Adobe Photoshop, many in which I didn`t depply new, so it was really nice. After lunch we went to the Mac lab with Lauren and learned how to use the Adobe After Effects in which I had never used before, so everything was pretty new to me, we did animations and after we turned it into a GIF in which we will have to do one with our own object, so I have a lot of thinking on how i will do.

# data[].attributes.body
Today we had photography and we had to take lots of pictures of our object using diferent techniques, the hardest part about framing my object was to fit it in the environment in a way they it would kind of be also a part of it. The technique that i most used was the closed up, i just like to take a picture of something and be able to see all of its details. The ones that I found were the best were the vlosed up ones. To make a gif using what I learned today I will try to do in a way that I found my objects work better, places, patters...
After lunch we has lessons with Cezar, we went to the photografy room, in which we learned abou its hazards anw to propely use the material there, afterwards we learned a lot about photography itself, for me it was very nice, because it was something I always wanted to know, I really felt i got some improvement in photographing.

# data[].attributes.body
We learned a lot about photography, we had to take a photo of our own objects in a way that we learned. After lunch we had lesson with Solange, we did perspective drawing, it was really nice to do this again.

# data[].attributes.body
Today we did a lot! First period we learned about negative space drawing our own objects with a charcoal, afterwards we did a drawing of the whole classroom upside down with our object in it. That was challenging, but I had already done this tipe of drawing before, still got to experience some improvement.
After lunch we had life drawing, it was my first time doing it, i had a lot of fun, it was in total 4 drawings switching from watercolour to ink, I could see my improvement from drawing to drawing.

# data[].attributes.body
Today I've got to experiment a different way of drawing, it was a real challange, because we had a pen on the tip of a really long stick and we had to draw perspective in a long distance from the pen, the paper and the object, with a limited time in which we had to administrate it correctly. In the end i just accepted the current situation we were imposed to work with and it worked well.

# data[].attributes.body
Drawing a friend of mine.