# data[].attributes.body
plot 5 to the y intercpet

plot 3 in x intercept and do rise over run and then it will be rise run 1

do the line

# data[].attributes.body
1.Plot 5 in the chart in Y Intercept.

2. Go three up and 1 right

3. Keep doing this and draw best line of fit

# data[].attributes.body
y=3x+5

1. plot 5 in the graph

2. go up 3 and 1 to the right

3. connect the dots

# data[].attributes.body
1. You first put the y-intercept that is 5.

2. After you do that, you go up 3 times and right 1 time.

3. You continue the ruse over run.

4. Connect the dot.

# data[].attributes.body
You first plot the 5 in the number line

Then yo go up 3 spaces and go 1 to the right since it is positive

Draw the line through the points

# data[].attributes.body
I´m sorry

# data[].attributes.body
1. First you look for the y intercept.

2. Second, plot in the number 5 in the y axis.

3. Then from five go 3 units to the right.

4. Draw a line a line throught the points.

# data[].attributes.body
1. Identify the y intercept, in this case it is 5. Plot the 4 in the y axis.

2. Follow the slope which is 3, you have to go 3 units up and one to the right.

3. Join the points in the coordinate plane and form a line.

# data[].attributes.body
1. plot the number 5 in the line.

2. go up 3 and go to the right and plot them.

3. graph them a coordinate plane

# data[].attributes.body
Put the 5 in the number line

Then go up 3 and 1 right

Match the line

# data[].attributes.body
1. Plot 5 in the line

2. go up 3 units and go to the right 1

3. then you graph the line

# data[].attributes.body
1.First look at the y-intercept, which is 5.

2. Plot 5 in the y-axis.

3. Look at the slope, that is 3/1

4. From 5, then go to three units up and then one to the right, later mark the point from 5 and repeat the same slope , then do 3 units up and then one to the right.

5. Put the points in the coordinate grid with a line.

# data[].attributes.body
plot- y ntercept

group 3 unit and 1 to the right

then connect the points

# data[].attributes.body
1. First we need to see if the equation is in slope-intercept form

3. Then plot the y-intercept which is 5

4. Then go up 3 and go 1 to left in other words we are using rise over run to plot the point for the slope.

5. Connect the points

# data[].attributes.body
1. plot 5 in th y axis

2. go up 3 and to the right 1 until the grid ends

3. connect to points

# data[].attributes.body
1. First, plot 5 which is the y-intercept.

2. Go up 3 and to the right 1 which are the slope.

3. Last, connect the points to make a line.

# data[].attributes.body
Put a point in the 5 number at the y axis

then you go up three units and one to the right using rise over run

then join the points with the ruler

# data[].attributes.body
1. plot the y intercept that is 5

2. follow the slope that is 3/1

3. join the points with a line

# data[].attributes.body
1. Find the slope (3)

2. Find the Y-Intercept ()

3. Start at 5 and keep graphing rise 3 run 1 repeatedly

# data[].attributes.body
1. plot the y intercept (0,5)

2. Then of the slope which is 3/1. in rise over run.

# data[].attributes.body
Plot 5 in the. y-intercept

Then plot the 3 in the graph and use it as rise/run

Go 3 steps up and 1 tot he right

then after that make your line

# data[].attributes.body
y=3x+5

1. plot the 5 in the number line

2. go up 3 and go 1 to the right

3. graph the line

# data[].attributes.body
look for the y- intercept point 5.

Then rise 3 the unit with rise over run 1.

Connect the points.

# data[].attributes.body
Plot the 5 which is the Y-intersect in the y axis

identify the slope of 3

Go three units up one unit to the right and repeat

# data[].attributes.body
y= 3x + 5

1. Make a coordinate plain

2. start by making a point in the y-intercept form which is 5

3. go as followed with the slope which would be 3/1 or rise 3 run 1

4. connect the dots into a line

# data[].attributes.body
Steps to plot the equation:

y = 3x + 5

1- Plot the y in the graph: 5

2- Then the slope which is 3/1

# data[].attributes.body
First put 5 on the y axis.

Then group 3 unit and 1 to the right.

Finally join all the points together

# data[].attributes.body
1. look at the y- intercept and graph it.

2. find the slope and start graphing it, like rise over sun.

3. You draw the line in the graph.

# data[].attributes.body
1. Look the y-intercept, known as 5.

2. Plot 5 in the y-axis.

3. Look at the slope and identify it as 3/1.

4. Graph 3/1. Three up and 1 right.

5. Keep going...

6. Now, do the same but this time negative.

Three down and 1 left.

7. Keep going...until line is finished.

# data[].attributes.body
1. First you look at the y-axis which is 5.

2. Then you plot with a point on number 5 on the y-axis.

3.Then you look at your slope which 3.

4.Then since number 5 you go 3 units up and then one to the right then you do the line.

# data[].attributes.body
1. Plot the y-intercept which is 5

2. Find the slope whis is 3/1

3. from the 5 intercept go up 3 units and 1 unit to the right

4. Connect the lines

# data[].attributes.body
1. First, You have to plot the y-intercept the graph, which is 5.

2. After you do that, you have to increase (go up) 3 places, if you it would be negative you have to the left, if it's possible, in this ocassion

it has to go to the right. 3x is the Slope of the line, and works like rise/run.

3. Then You have to plot it then, It will join the points together with a ruleer, it's a connection.

# data[].attributes.body
y=3x+ 5

FIRST you put three x minus the

y and u live the five in the other side

then u send the y to subtract the 5 and its equal to 3

then u dvide the two threes and the answer will be the variable x and the number that the division gave u.

# data[].attributes.body
The step to graph the equation is:

1. Plot 5 in the y-intercept

2. Go up 3 and to the right 1 and plot those points

3. Then connnect all the points together

# data[].attributes.body
1. Plot the y-intercept

2. Go up 3 and to the right 1 and plot those points

3. Connect the points

# data[].attributes.body
first plot the 5 in the y axis

then go 3 up and 1 one left

3/1 rise over run

# data[].attributes.body
1. look for the slope and y-intercept

2. Plot 5

3. Go up 3 and run 1 until you get to the border of the chart.

4. Draw the line through the points

# data[].attributes.body
1. you look for the y-intercept 5 in the graoh

2. you do rise 3 units and run unit

# data[].attributes.body
Look for the y intercept which is the five.

Then plot it.

After this use rise and run with the slope of 3/1.

Finally draw the line through the graph

# data[].attributes.body
1. look for the y-intercept then plot the point in the y-axis

2.go up 3 units up and then 1 unit right.

that should be a line

# data[].attributes.body
1. Look for the y- intercept which is 5 and plot a point.

2.After that you go up 3 units and 1 unit to the right.

3. Do that until you have at least have three points and then connect them.

# data[].attributes.body
1. Plot a point in the y intercept positive 5 in the y axis

2. from the 5 more three units up and once to the right

# data[].attributes.body
-first you look for the y intercept that is 5
- then rise 3 units and run 1 unit until you get to the border of the chart

# data[].attributes.body
1. first, you look for the y intercept.

2. Second, plot in the number 5 in the y axis

3. Then from five go 3 units to the right.

4. Draw a line through the points.

# data[].attributes.body
1. Plot 5 in the y-intercept

2. Now, plot 3 in you x-intercept, which your slope, and go 1 unit up, and 1 to the right. Repeat process to get a line across the plot chart

3. Graph your line

# data[].attributes.body
1. look at the y-intercept, 5

2. plot 5 in the y-axis.

3. look at the slope, which is 3/1.

4., from 5, go three units up and one to the right, mark the point from 5

and repeat the same slope, three units up, one to the right.

5. Joint the points in the coordinate grid with a line

# data[].attributes.body
FIrst you plot the y-intercept.

Then you do rise over run until you

end

# data[].attributes.body
1. First you plot the y-intercept which is positive five.

2. Following the slope, which is 3/1 you have to go from five three units up and one the the right.

3. Join the points in the coordinate grid with a line.

# data[].attributes.body
1. first put the 5 on the y-axis

2. then from the y-axis go three up and 1 to the right

3, repeat the same steps until you have line

# data[].attributes.body
1. Put a point in the 5 in the y axis. Which is the y-intercept

2. Then go up 3 units and 1 unit to the right. Which is the slope, rise over run.

3. Finally join all the points together.

# data[].attributes.body
1. plot a point the y-intercept which is 5.

2. from the 5 go 3 units up and one unit right

# data[].attributes.body
1. First you have to plot a point for number 5

in the y-axis.

2. then go up 3 units and then 1.

3. Connect all the points together

# data[].attributes.body
1. look for the slope and the y-intercept

2. find the five in the numberline

3. go 3 units up and 1 unit to the right

4. connect the points

# data[].attributes.body
List the steps to graph the following equation y = 3x + 5