# data[].attributes.headline
Instituto gubernamental técnico San Martin de Porres 

# data[].attributes.subject
Instituto gubernamental técnico San Martin de Porres 

# data[].attributes.body
Clases: Technical English

Student:Jossel xavier cáceres

Teacher:Evelyn Nuñez

Year 2022.

# data[].attributes.body
KEEP YOUR WORKPLACE CLEAN AND ORDERLY.

2. DO NOT LEAVE MATERIALS AROUND THE MACHINES. PLACE THEM IN A SAFE PLACE AND WHERE THEY ARE NOT IN THE PASSAGE.

3. PICK UP BOARDS WITH NAILS, SHEET METAL TRIMS AND ANY OTHER OBJECT THAT MAY CAUSE AN ACCIDENT.

4. STORE THE MATERIALS AND TOOLS ORDERLY. DO NOT LEAVE THEM IN UNSAFE PLACES.

5. DO NOT OBSTRUCT AISLES, STAIRS, DOORS, OR EMERGENCY EXITS.

# data[].attributes.body
Tool for digging and for collecting and moving materials, especially soft or pasty ones such as sand or earth, which consists of a flat piece of metal, wood or plastic, rectangular or trapezoidal, with more or less rounded edges, and usually somewhat concave, which is attached to a long handle

Elda used the shovel to plant a plant in her garden

# data[].attributes.attachment_caption
A protective glove protects the hand or part of it, for example the palm of the hand, against a series of risks. Additionally, it can cover part of the forearm and arm. Gloves for chemical risk and for microorganisms can be, depending on their design, reusable or disposable.

# data[].attributes.body
Gloves are a safety tool to protect us from any accident

# data[].attributes.attachment_caption
A level is a measuring instrument used to determine the horizontality or verticality of an element. There are different types and they are used by surveyors, carpenters, masons, blacksmiths, aluminum workers, photographers and others.

# data[].attributes.body
For not using a level the piece was bad

# data[].attributes.body
Tape that has marked the length of the meter and its divisions and is used to measure distances or lengths.

Graduated metal tape used to take and mark measurements.

# data[].attributes.body
The “C” type press is one of the most common presses used in carpentry. Its function is to hold the wood to be cut so that it does not move and an uneven cut is generated.

buy a C clamp at the hardware store

# data[].attributes.body
A riveter is a mechanical device made up of a set of simple machines; levers, wedges, screws, springs, etc., which is used to place rivets

I was placing a sheet of zinc and the riveter fell

# data[].attributes.attachment_caption
 Tool to tighten or loosen nuts. I saw many wrench in I didn't know which one to choose

# data[].attributes.body
It is a tool formed by a base of wood or metal, on which metal bristles are fixed, which have different hardness depending on the work they have to do.

# data[].attributes.attachment_caption
A mallet is a hand tool used to strike or percuss; It is shaped like a hammer, but it is larger and heavier. While the hammer plays its main role in carpentry, the mallet plays it in the construction industry or in masonry.

# data[].attributes.body
The mallet hit the table.

# data[].attributes.attachment_caption
The micrometer, also called Palmer's screw, Palmer's gauge or simply Palmer's, is a measuring instrument whose name derives etymologically from the Greek words

# data[].attributes.body
I saw the engineer using a micrometer

# data[].attributes.attachment_caption
An electrode is an electrical conductor used to make contact with a non-metallic part of a circuit, for example a semiconductor, an electrolyte, the vacuum of the group, a gas, etc.

# data[].attributes.body
With shock welding, the two pieces of metal were pressed together and then welded together with an electrode on each side of the joint.

# data[].attributes.attachment_caption
A welding mask is a type of personal protective equipment used when performing certain types of welding to protect the eyes, face, and neck from petarrelleig, ultraviolet light, sparks, infrared light, and heat.

# data[].attributes.body
To be able to weld you need a welding helmet

# data[].attributes.attachment_caption
A washer is a thin disk-shaped mounting element with a hole usually in the center (circular crown), its most frequent use being to seat nuts and bolt heads.

# data[].attributes.body
I was fixing my motorcycle and I lost the washer of a screw

# data[].attributes.attachment_caption
The hydraulic press is a mechanism made up of communicating vessels driven by pistons of different areas that, by means of a small force on the piston with a smaller area, allows a greater force to be obtained on the piston with a larger area.

# data[].attributes.body
in the workshop there are many bad hydraulic presses

# data[].attributes.attachment_caption
 Tighten the nut so it locks into position.
 A nut is a mechanical part with a central hole, which has a thread, which is used to attach to a screw, fixed or sliding.

# data[].attributes.attachment_caption
The vise is a tool that is agile and easy to handle, to pieces so that they can be subjected to different mechanical operations such as sawing, drilling, milling, filing or marking.

# data[].attributes.body
my dad has a vise and it's red

# data[].attributes.attachment_caption
Tool for tightening nuts or bending wires that consists of a kind of metallic pliers with two crossed arms and articulated by an axis and with strong, flat or conical tips.

# data[].attributes.body
Will squeezed something with the pliers and pulled it out of the hole

# data[].attributes.attachment_caption
The Drill Press is the stationary version of the conventional drill. Column drilling machines are the most used in workshops thanks to the possibility of carrying out the most varied jobs on them, even as standard, with suitable tools.

# data[].attributes.body
my dad was working with the drill

# data[].attributes.attachment_caption
is a fixing process in which two or more pieces of a material are joined, usually achieved through coalescence, in which the pieces are welded

# data[].attributes.body
You will need to get a roll of 60/40 tin to solder with the soldering iron

# data[].attributes.attachment_caption
It is a manual tool used for the wear and refinement of pieces of different materials such as metal, plastic or wood. It is formed by a tempered carbon steel bar that has grooves called teeth and that is equipped with a handle or handle on the back.

# data[].attributes.body
The file has a finer rifling and gives a smoother finish

# data[].attributes.attachment_caption
Hitting tool, especially for driving and extracting nails, consisting of an iron or other hard metal head, usually square or round on one side and pointed on the other, with a handle, usually made of wood, fitted into the center of it forming a T.}

# data[].attributes.body
The claw hammer can also be used to pull out nails or spikes.

# data[].attributes.attachment_caption
Screwing or unscrewing tool that generally consists of a metal bar attached to a handle and finished at one end that adapts to the head of the screw.

# data[].attributes.body
There's a little screwdriver on a shelf

# data[].attributes.body
A small, long, thin piece of metal, with a head on one side and a point on the other, used for nailing things, hanging things from it, or for ornamental purposes.
At first, Mike believed that the nail had not hurt him, because he felt no pain.

# data[].attributes.attachment_caption
The Drill Press is the stationary version of the conventional drill. Column drilling machines are the most used in workshops thanks to the possibility of carrying out the most varied jobs on them, even as standard, with suitable tools.

# data[].attributes.body
As long as my dad soldier I gave him feared the metal ladder