# data[].attributes.body
70% done

# data[].attributes.body
Dominate - 15 cm × 4cm x 2cm
Sub-dominate - 6cm x 2.5cm x 2cm
Surbordinate - 2cm x 2cm x 2cm

# data[].attributes.body
Hi Kelvin. My work in progress. Left putting the cities together

# data[].attributes.body
Journal sketching side views. continue :

# data[].attributes.body
Hi kelvin,  Attached is my final shape formation with different angles. ( side view)

# data[].attributes.body
Hi kelvin, This is a picture (Top biew) for my new project and was not related to strypone project.  I would ammend the formation in part C with full details. This idea practically not too handy with the subordinates ( stairs formation)

# data[].attributes.body
Hi kelvin. These are the 3 basic volumatric shapes that i will be working for my shape cities project. The measurement for 3 volumetric shapes as as follow. Dominant : 10cm* 5cm*
Sub- Dominant: 24cm* 2.5cm*
Subordinate: 2.5cm*1.5cm*

# data[].attributes.body
Hi Azhar, what are the changes needed for this model below before the submission on Monday? Thank you.

# data[].attributes.body
Hi Kelvin, these are the 3 basic volumetric shapes i will be working with for my Shape Cities project. The measurements for the 3 volumetric shapes are as follows:
Dominant: 10cm * 4cm * 10cm
Sub-dominant: 18.5cm * 2cm * 2cm
Subordinate: 4cm * 4cm * 4cm

# data[].attributes.body
Hi Mr Azhar. These are the 3 basic volumetric shapes I will be working with for my Shape Cities project.
The measurements for the 3 volumetric shapes are as follow:
Dominant: 5cm * 5cm * 5cm
Sub dominant: 15cm * 2cm * 3cm
Subordinate: 2cm * 2cm * 2cm / 3cm * 2cm * 3cm

# data[].attributes.body
Hi Kelvin, this is my work in progress . No much changes from the styrofoam design , just taller .

# data[].attributes.body
Hi Mr Azhar. These are the 3 basic volumetric shapes I will be working with for my Shape Cities project. The measurements for the 3 volumetric shapes are as follows: Dominant: 7.5 cm x 5 cm x 3 cm. Sub-dominant: 7 cm x 2.5 cm x 2.5 cm. Subordinate: 2 cm x 2 cm x 2 cm.

# data[].attributes.body
Part B
Hi Azhar, after much deliberation and trials on other formation, ive decided to settle for this to represent the principle of repetition. So now the 3 outer walls are repeated too. There are a lot lesser volumes than before, hoping it wont lose its essense of rigidness, so it seems less like a base. Hoping for your feedback soon. THank you

# data[].attributes.body
Hi Kevin, my work in progress~ there are amendments to the sub-bordinate thus there will be a slight changes made for the prototype from the styrofoam design.

# data[].attributes.body
Hi Kelvin, these are the 3 basic volumetric shapes i will be working with for my Shape Cities project. The measurements are as follows:

Dominant: 20cm x 2cm x 2cm

Sub dominant: 10cm x 2cm x 2cm

Subordinate: 3cm x 3cm x 3cm

# data[].attributes.body
Dominant size: 8cm x 6cm x 2cm
Subordinate size: 4cm x 2cm x 1cm
Subdominat size: 6cm x 3cm x 1.5cm

# data[].attributes.body
Hi Azhar, as there is a change in the size of the dominant, there will be a slight change in the design. The number of pieces below are the same as the ones from the styrofoam model. Will be adding more subdominant and subordinate to enhance the design.

# data[].attributes.body
Hi Kelvin:
Pls find the revised version of Dominant and Sub-dominant for your perusal.
The dimension as follows:
Dominant: 12cm*6cm*3cm
Sub-dominant: 6cm*4cm*4cm
Subordinate remains as 8cm*2cm*2cm

# data[].attributes.body
Hi Azhar, work-in-progress for the prototype. I am using a paint brush to apply the glue this round as it serves a different purpose compared to a toothpick. The paint brush can spread large areas evenly.

# data[].attributes.body
Hi Azhar, gluing of the individual shapes in progress. I use a toothpick to apply the glue onto the flap. This is an easier way of handling than squeezing the glue directly from the tip of the glue bottle onto the flap.

# data[].attributes.body
Hi Azhar, these are  the blocks needed for the set up of the prototype. Hopefully everything goes well later with the gluing of the shapes. Will try to update with more pictures when there is progress.

# data[].attributes.body
Edited.

# data[].attributes.body
Hi Azhar,
These are my 3 basic volumetric shapes that I’ll be using for my shape cities.

Dominant : 8cm by 8cm by 3cm
Sub-dominant : 10cm by 2cm by 2cm
Subordinate : 3cm by 3cm by 3cm

# data[].attributes.body
Hi Azhar,

These are a couple of shapes i've come up with due to your previous comments that one of the sides looks like a base. Which one do you think works better or do you think i have to go even lesser blocks? Thank you

# data[].attributes.body
Hi Kelvin. These are the 3 basic volumetric shapes I will be working with for my Shape Cities project. The measurements for the 3 volumetric shapes are as follows: Dominant: 8 cm * 2 cm * 2 cm. Sub-dominant: 5 cm * 2 cm * 5 cm. Subordinate: 4 cm * 2 cm * 2 cm.

# data[].attributes.body
Hi Kelvin. These are the 3 basic volumetric shapes I will be working with for my Shape Cities project. The measurements for the 3 volumetric shapes are as follows: Dominant: 15 cm * 4 cm * 2.5 cm. Sub-domniant: 10 cm * 2.5 cm * 2.5 cm. Subordinate: 10 cm * 1.5 cm * 1.5 cm.

# data[].attributes.body
Hi Kelvin,

These are the 3 basic volumetric shapes that I will be working with for the shape cities.

Measurements are as follow:
Dominant : 16cm x 12cm x 2cm
Sub-Dominant : 4cm x 4cm x 4cm
Subordinate : 4.5cm x 1.5cm x 1.5cm

Regards to the formation, I will be reverting the design back to the first ideation as conversed during the consultation in class with you earlier.

# data[].attributes.body
Hi Azhar,
These are the 3 basic volumetric shapes i will be using. The 3 measurements are
Dorminant : 10cm x 8cm x 2cm
Subdorminant: 8cm x 2.5cm x 2cm

Subordinate: 10cm x 1.2cm x1.2cm.

# data[].attributes.body
Hi Kelvin,

These are the 3 basic volumetric shapes I will be working with for my Shape Cities project. The measurements for the 3 volumetric shapes are as follows: Dominant: 11cm*6cm*3cm.  Sub-dominant: 10cm*4cm*3cm.  Subordinate: 8cm*2cm*2cm.

# data[].attributes.body
Here's a rough sketch of what the final may look like, depending on the how much I need to fill up 24x24x24. I adjusted my dominant's length from 21.5cm to 15cm.

My goal is a few dominants on an up and down level, supporting the spacing between each other will be the subdom and a spiral surround with subordi

# data[].attributes.body
PART A, NG XIN NI , DDID

Hi Azhar. These are the 3 basic volumetric shapes I will be working with for my Shape Cities project.

The measurements for the 3 volumetric shapes are as follows: Dominant: 6cm * 3cm * 9cm. Sub-domniant: 12cm * 1cm * 2cm. Subordinate: 3cm * 1cm * 3cm/3cm * 2cm * 3cm.

# data[].attributes.body
Hi Kelvin, these are the 3 basic vol shapes I will be working with.

The measurements are:
Dominant - 9.5cm x 9.5cm x 2cm
Sub-dominant - 9.5cm x 4cm x 4cm
Subordinate - 5cm x 5cm x 5cm

# data[].attributes.body
Hi azar here are my cutouts

# data[].attributes.body
Hi Azhar, these are the 3 basic volumetric shapes I will be working with for my Shape Cities project. The measurements for the 3 volumetric shapes are as follows: Dominant: 13 cm * 10 cm * 2 cm. Sub-dominant: 10 cm * 5 cm * 2 cm. Subordinate: 10 cm * 2 cm * 2 cm.

# data[].attributes.headline
(PART)(FULL NAME)(COURSE) PART A, NOOR AZHAR, DDID

# data[].attributes.subject
(PART)(FULL NAME)(COURSE) PART A, NOOR AZHAR, DDID

# data[].attributes.body
Hi Azhar/Kelvin. These are the 3 basic volumetric shapes I will be working with for my Shape Cities project. The measurements for the 3 volumetric shapes are as follows: Dominant: xx cm * xx cm * xx cm. Sub-domniant: xx cm * xx cm * xx cm. Subordinate: xx cm * xx cm * xx cm.

# data[].attributes.body
Hi Kelvin, these are the 3 basic vol shapes I will be working with.

The measurements are:
Dominant - 21.5cm x 6cm x 6cm
Subdom - 5cm x 5cm x 5cm
Subord - 5cm x 3cm x 1cm