# data[].attributes.body
Using a process to transform photos from what was captured in a camera either to be closer to what our eyes saw, or to alter the image artistically.

# data[].attributes.body
a brownish tone imparted to a photograph

# data[].attributes.body
Lightest/contains most light in a photograph.a bright spot in a photograph. Normally it is assumed to be one of the brightest points in the image. Highlights are normally created by a bright or intense illumination or by various forms of diffusion or reflection.

# data[].attributes.body
Images that tend to have lots of shadows and highlights and few midtones have high contrast – the effect is dramatic

# data[].attributes.body
Darkest parts of a photograph.

# data[].attributes.body
the act of accidentally shaking a camera during shooting due to unsteady hands, which results in blurry images. This generally occurs more often if you're shooting on a low shutter speed or with a heavy lens, and can be avoided by using a tripod and cable release setup.

# data[].attributes.body
used to stabilize and elevate a camera, a flash unit, or other photographic equipment. Tripods have three legs and a monopod is a single leg that is usually handheld

# data[].attributes.body
the apparent streaking of moving objects in a photograph or a sequence of frames, such as a film or animation. It results when the image being recorded changes during the recording of a single exposure, due to rapid movement or long exposure.

# data[].attributes.body
a momentary-action mode that holds shutters open for as long as a photographer depresses the shutter-release button.

# data[].attributes.body
the length of time when the film or digital sensor inside the camera is exposed to light, also when a camera's shutter is open when taking a photograph.

# data[].attributes.body
This feature allows you to take a sample of a white object, such as a white wall or a piece of paper, within the current lighting conditions. By manually setting the white balance to the white color within the sample image, you can set the white balance with a high degree of accuracy

# data[].attributes.body
flash of artificial light (typically 1/1000 to 1/200 of a second) at a color temperature of about 5500 K to help illuminate a scene. A major purpose of a flash is to illuminate a dark scene. ... Flash units are commonly built directly into a camera.

# data[].attributes.body
This mode is used for getting brighter and warmer shots while compensating for the cool shade of fluorescent light. ... This mode helps pick the right White Balance under low light conditions.

# data[].attributes.body
refers to an artificial lighting source (like a lamp or ceiling fixture) that emits heat and produce a “warmer” or reddish colour

# data[].attributes.body
a cloudy or overcast day produces really soft light that can be flattering on the human face

# data[].attributes.body
Not in direct sunlight.  your photos may tend to look a little dull or cool when taken in the shade.

# data[].attributes.body
Light that comes more or less directly from sun: it varies very widely in brightness, color and quality. or A notional standard light: an average mixture of sunlight and skylight with some clouds typical of temperate latitudes around midday.

# data[].attributes.body
automatically adjusts the white balance when capturing a photo or recording video. However, this setting may not always provide the most accurate color

# data[].attributes.body
expressed in mm and a higher number means a bigger zoom, while a lower number mean the lens can be used for wider shots.

# data[].attributes.body
the zone of acceptable sharpness within a photo that will appear in focus

# data[].attributes.body
“the effect of a soft out-of-focus background that you get when shooting a subject, using a fast lens, at the widest aperture, such as f/2.8 or wider.” Simply put, bokeh is the pleasing or aesthetic quality of out-of-focus blur in a photograph.

# data[].attributes.body
Aperture controls the brightness of the image that passes through the lens and falls on the image sensor.

# data[].attributes.body
the ratio of the system's focal length to the diameter of the entrance pupil. It is a dimensionless number that is a quantitative measure of lens speed. it affects the amount of light that reaches your camera sensor.

# data[].attributes.body
Burst mode, also called continuous shooting mode, sports mode or continuous high speed mode, is a shooting mode in still cameras. In burst mode, several photographs are captured in quick succession by either pressing the shutter button or holding it down.

# data[].attributes.body
a technique for adjusting the exposure indicated by a photographic exposure meter, in consideration of factors that may cause the indicated exposure to result in a less-than-optimal image.

# data[].attributes.body
For digital photography, ISO refers to the sensitivity—the signal gain—of the camera's sensor.

# data[].attributes.body
the general technique of taking several shots of the same subject using different camera settings

# data[].attributes.body
Autofocus points are what the camera uses to focus on a subject.

# data[].attributes.body
an image stabilization technology that minimizes blur caused by camera shake.

# data[].attributes.body
“straight-out-of-camera” and denotes zero computer photoshop.

# data[].attributes.body
A miniature representation of a page or image that is used to identify a file by its contents.

# data[].attributes.body
a set of data that describes and gives information about other data. Photo metadata allows information to be transported with an image file, in a way that can be understood by other software, hardware, and end users, regardless of the format.

# data[].attributes.body
Digital Single Lens Reflex. A digital still image camera that uses a single lens reflex (SLR) mechanism.

# data[].attributes.body
is an electronic device that converts an optical image into an electronic signal. It is used in digital cameras and imaging devices to convert the light received on the camera or imaging device lens into a digital image.

# data[].attributes.body
Film grain or granularity is the random optical texture of processed photographic film due to the presence of small particles of a metallic silver, or dye clouds, developed from silver halide that have received enough photons

# data[].attributes.body
ASA is another measurement of film speed, or sensitivity to light. ASA is a scale created by the American Standards Association, but it is no longer widely used.

# data[].attributes.body
is random variation of brightness or color information in images, and is usually an aspect of electronic noise. It can be produced by the sensor and circuitry of a scanner or digital camera. ... Image noise is an undesirable by-product of image capture that obscures the desired information.

# data[].attributes.body
ISO stands for International Standards Organization it measures the sensitivity of the image sensor.

# data[].attributes.body
calculate both shutter speed and aperture (given a manually or automatically selected ISO)

# data[].attributes.body
In TV, the user manually chooses a shutter speed setting while the camera automatically adjusts the aperture for each shot.

# data[].attributes.body
is a setting on some cameras that allows the user to set a specific aperture value (f-number) while the camera selects a shutter speed to match it that will result in proper exposure based on the lighting conditions as measured by the camera's light meter.

# data[].attributes.body
allows the photographer to determine the exposure of an image by letting them select an aperture value and a shutter speed value

# data[].attributes.body
Automatic exposure mode is a standard feature on digital cameras that will automatically determine the correct exposure for pictures without any user input other than to select the AE option before taking a picture.