# data[].attributes.body
Body of the final piece

# data[].attributes.body
1. Line up

2. Brief discussion about design what is it etc problem solving

3. Is it different from art? Problem solving to help others

4. Design cycle what is it?

5. How is it different from the inquiry cycle?

6. Four parts what are they?

7. Layout the labels on the four tables

8. Still standing look at the labels on the wall, talk through them

9. Together asking for volunteers

10. Pick one and take it to the table where it belongs

11. After all are given out each table put them in order.

12. Stand up individually and back into line in the same order. 1 to 16

13. Back to tables

14. Second task

15. Evaluate the desk tidies - hand them out take photos.

16. What do we need to evaluate

17. Evaluation table answer.

# data[].attributes.body
Measurements

# data[].attributes.body
- Scale:
- Base:
- Left wall:
- Right wall:
-

# data[].attributes.body
Consider the following
Is it sanded
Are all the details I want included
Are there any improvements I can make to the design
eg curvs on corners, decorative details
Does it need any feet, adding feet can make it more sit better and protect any surface it will come to rest on.
How will it be decorated?
Look at examples of decoupage and collect together some images you would like to use. Dont choose glossy images as they will be hard to stick down.
Painting can be left to a later date if you wish.

# data[].attributes.body
sides of big polygon: 20 c
width of polygon :4cm

# data[].attributes.body
<<<Measurements on the left
vvv copy of final

# data[].attributes.body
Scale 1:1 (unit cm)
- Base: 10 x 7 (thick)
- Left wall: 7 x 5.5 (thick)
7 x 4.5
curve: d=3
- Right wall: 7 x 5.5 (thick)
7 x 4.5
curve: d=3 (thick)

# data[].attributes.body
1st box length: 50 cm
width:  20 cm
2nd box length: 45cm
width: 20 cm
3rd box length: 40cm
width: 20cm

This can be either be cutted as one whole shape too. If it is a one piece: If thats the case,

The length would be :

# data[].attributes.body
Scale 1:1
Base: 10cm x 20cm
1st wall: 10cm x 8cm
2nd wall 10cm x 4.5cm

# data[].attributes.body
Base: 10cm x 10cm
Walls (*4): 12cm x 10cm
Branches (*2): 10cm x 2cm
Headphone Holder's Leg: 18cm x 2cm
Headphone Holder: 4cm x 2cm
Cup holder: 7cm (diameter)

All the parts should be made of hardwood, except the walls, they could be made of thin wood. I am not how you can make the cup holder but I think you could cut the bottom piece of it first then about the upper circle, I think you cut it from a big piece of wood. I don't know how would you cut it but I just you some suggestions because these was what I think of when you prepare the materials.

https://photos.app.goo.gl/HyDc1kd0U7aG3wNR2

# data[].attributes.body
Base : 25cm * 25cm
Height : 5cm
3 * Partition 1 : 5cm * 25cm
20 * Partition 2 : 5cm * 5cm

# data[].attributes.body
Make the base and back of the outer and inner pieces using the thicker material, make it large enough.

Base: 20cm x 18cm
Back: 18cm x 18cm
Front: 25cm x 18cm
TOP : 10cm x 18cm

# data[].attributes.body
Base: 42cm x 24cm
Backboard: 42cm x 30cm
x3 Sideboard: 24cm x 30cm
Floorboard No.1: 32cm x 24cm
x2  Floorboard No.2: 8cm x 24cm
Divider No.1: 24cm x 15cm
Divider No.2: 15cm x 8cm

# data[].attributes.body
Height : 15cm
Width and length : 12cm
Materials :

# data[].attributes.body
Base and top:  14 cm x 13 cm
3 sides: 20 cm x 12 cm
Drawers:

# data[].attributes.body
Scale: 1:1
Height: 20 cm
Width and Length: 15 cm

Back piece: 15 cm x 20 cm
Front piece: 15 cm x 5 cm
Side and middle pieces 15 cm x 20 cm
Small middle piece: 5 cm x 15 cm
Bottom: 15 cm x 15 cm

# data[].attributes.body
Pen holder

Scale:
Base: 10x10(4)+5x5(5)
Height: 10x5(8)+5x5(10)

Make a base out of 12 cm  for this one that has the same shape and attach the edge first, this will give some support for the smaller internal pieces. Outter edge will need to be a Little longer the stick to the side of the base. - Make another drawing to show

# data[].attributes.body
Body Part:
Scale of horizontal length: 1:1.3
(20 cm : 15 cm)

Scale of Z axis: 1:1 (6 cm :6 cm)
Scale of Y axis (vertical length):1:1
(7 cm :7 cm)

Cover:

Scale of horizontal length: 1:1.3
(20 cm : 15 cm)

Scale of Y axis (vertical length):1:1
(7 cm :7 cm)

Supporting legs:

Scale of diameter of supporting legs: 1:1.9  (1 cm : 1.9 cm)

Scale of diameter of supporting legs: 1:1.3  (2 cm : 2.6 cm)

Summary (Final measurements):
a. Body part: 15 cm x 6 cm x 7 cm
b. Cover: 15 cm x 7 cm
c. Supporting legs: 1.9 cm x 2.6 cm x 1.9 cm

# data[].attributes.body
Dimensions:  20 cm x 40 cm outline. Shelves are going to be 20 cm in lenght

Scale 1:4

Use the thicker material for the outside frame, dont make it too large. Fit the shelves in after the outer frame is complete.
Work on the decoration for your shelves, dont start making until you have a good decorative theme for your design
Add more shelves and a vertical partition. Why are the shelves at the height you have put them. Consider the size of the object you are designing the shelves for

# data[].attributes.body
scale  (5:2)
part of cutting list
Base - 25 cm x 10 cm
2 sides - 25 cm x 10
4 wheels - diameter 5
2 sticks -6 cm long

Add handles on the front and back
Make the sides and base from the thicker 12mm material and stick the front and back on after.
Add the handles to the model and mark out the wheels ready for cutting and drilling in the thinner

# data[].attributes.body
Photo Gallery
https://photos.app.goo.gl/9je95RfWOrrAkoxA2

Should be 1:1 Scale
If its not you need to include the scale
On your model show the decoration and the position of any features.

# data[].attributes.body
scale  1:4
desk tidy cutting list
2 sides - 10cm x 20cmx5 mm
1 back -  21cmx20cmx5mm
2 base -  10cmx21cm x5mm
1 divider - 10cmx15cmx5mm
1 shelf - 10cmx14cmx5mm
1 front - 4 cm x20cmx5mm

Make the outer parts, back sides and base from the thicker 12mm materials cut the main shelf after and fit it in, then add the other pieces made from the thinner MDF - Make a drawing to show this

# data[].attributes.body
Phone Holder

Scale:

leg (leg 1 = leg 2) 10cm x 1 cm

arm (arm 1 = arm 2) arc 7 cm x 1 cm

main piece 6 cm x 14 cm

bottom part of the main piece 2 cm x 1 cm

base = 15cmx15cm

Use the thicker 12mm wood for the base and the thinner MDF for the top. You might want to consoder putting the arcs more to the side and making them from the thicker material you could then drill them and use pegs to support the moving section

# data[].attributes.body
Scale 1:2
Parts cutting list
Base - 60 cm x 20 cm x 1 cm
Back side - 60 cm x 18.5 cm x 5 mm
Left piece - 19.5 cm x 18.5 cm x 5 mm
Right piece - 19 cm x 18.5 cm x 5 mm
Middle piece (Vertical) - 19 cm x 18.5 cm x 5 mm
Middle piece (horizontal) - 39 cm x 1 cm x 19.5 cm
Front piece - 20 cm x 18.5 cm x 5 mm
Top piece - 60 cm x 20 cm x 5 mm