# data[].attributes.body
I am reverse engineering a pen.

# data[].attributes.headline
Name of item you are reverse engineering + a  photo/video

# data[].attributes.subject
Name of item you are reverse engineering + a  photo/video

# data[].attributes.body
A pen is a tool used for writing.

# data[].attributes.body
The pen cap is a hard piece of blue plastic that has an opening on one end for the pen tip and a small opening on the other end. It has a longer piece of blue plastic on one side. The cap is used to cover the tip of the pen to prevent ink from getting on something it shouldn't.
The cap measures 1.5 inches in length.
Strength: strong and durable.
Weakness: small and easily lost

# data[].attributes.attachment_caption
This to is used for entertainment, when you wind him up he jumps.

# data[].attributes.attachment_caption
We are reverse engineering a plastic turtle.

# data[].attributes.attachment_caption
We are reverse engineering a multi-colored pen.

# data[].attributes.headline
The plastic turtle is used for kids to use in the water. 

# data[].attributes.subject
The plastic turtle is used for kids to use in the water. 

# data[].attributes.headline
A pen is used for writing and drawing. This one in particular has multiple colors to make it more fun.

# data[].attributes.subject
A pen is used for writing and drawing. This one in particular has multiple colors to make it more fun.

# data[].attributes.body
the shell to keep the pieces together and not the pieces to be seen to be seen. its about 5'cm

# data[].attributes.attachment_caption
the metal stick is used to hold the feet together, it looks like a small metal bar, if its taken out his legs will fall out, it is 2 center meters,  metal

# data[].attributes.attachment_caption
The head gives the body more balance. The part that thinks and makes the body do.

# data[].attributes.body
10 pieces we didn't break anything

# data[].attributes.body
we are reverse engineering a jumping eye ball!

# data[].attributes.body
these are the legs to the shell and the other pieces and to help it move. 4'cm

# data[].attributes.body
These parts connect to protect the inside of the turtle. The stomach helps the body stay afloat from water. The shell helps protect the back of the turtle so its back doesn’t get hurt. The stomach is 8 ½ by 4 ½ cm, the shell is 4 by 2 ½ cm.

# data[].attributes.attachment_caption
they make the shell of him stay together, wihtout them it made him fall apart,  7th a cm, small metal put into a swirl.

# data[].attributes.body
We reverse engineered a water gun.

# data[].attributes.body
like the photo

# data[].attributes.body
This is the 1st part of our multi-colored pen. It is a hard plastic screw that is 1 cm in length. The pen top holds the top of the pen together; it keeps the ink cartridges from falling out.
Strength: Durable, not easy to break
Weakness: Clear plastic, easy to lose

# data[].attributes.headline
A glowing jumping eyeball used for entertainment.

# data[].attributes.subject
A glowing jumping eyeball used for entertainment.

# data[].attributes.attachment_caption
they help him jump, the motor makes him move, without the legs he will fall down 3.5 cm, its made of plastic 

# data[].attributes.attachment_caption
this is a hard plastic cover that protects the motor and is 3 1/2 in long with no weaknesses

# data[].attributes.body
this is the screw to hold the shell together (its really tiny you might not be able to see it). half a cm

# data[].attributes.body
It is for entertainment.

# data[].attributes.attachment_caption
green small thing of plastic, its for decoration, without it there will be a hole on top of his head but still work, .5 cm, made of plastic. 

# data[].attributes.body
this is the wind up box this as you guessed it winds up the legs to propel it forward witch i mean is to make the legs move where it is facing. 2,5'cm

# data[].attributes.body
These are the pieces of the water gun shell. It help all of the parts stay together and held the water. It was 4 inches long and 2 and a half inches tall.
Strength: It killed two birds with one stone by holding the parts and the water
Weakness: Was pretty fragile broke very easily

# data[].attributes.body
legs for hopping

# data[].attributes.attachment_caption
The motor is a white capsule filled with metal and plastic pieces, it makes him be able to walk. If taken out he can't move. Hes about 2cm.

# data[].attributes.attachment_caption
a hard plastic shell with a hole for the winder and is 3 1/2 in long and has no weaknesses

# data[].attributes.body
this is the part that goes on the outside of he engine.

# data[].attributes.body
This is the pen clip. It attaches to paper and can hold it together. It is a hard plastic material and is 1 1/2 inches in length.
Strength: Durable, can hold papers
Weakness: Clear, easy to lose

# data[].attributes.body
This is the part where the water comes out. It connects to the hose from the pump. Its 1/4 of an inch long.
Strength: Shot water out straight.
Weakness: cant remove because its welded in.

# data[].attributes.attachment_caption
orange circle pieces, its the holder of everything, without everything would fall out, its about 3.6 cm, made of colored plastic  

# data[].attributes.body
Used to shoot water.

# data[].attributes.body
The trigger pushes the spring causing the spring to shoot the water out. The spring is metal and the trigger is plastic. 1in Strengths Light and durable Weaknesses easy to lose

# data[].attributes.attachment_caption
we are reverse engineering a pumpkin man 

# data[].attributes.body
The screws that hold the eye frame together

# data[].attributes.body
a pumpkin man is for scary people and he could walk like a man

# data[].attributes.body
1. A pen is used for writing

# data[].attributes.attachment_caption
Its a small spring with a hoop at each end, it holds the feet and the motor together. The metal spring cant work with no motor. Its about 1.2 cm.

# data[].attributes.attachment_caption
this is the part that goes on the pumpkin and it could moves 

# data[].attributes.body
The water reservoir and water tube helps hold and transport the water. They are both plastic. tube 2 1/2 Strengths Light and durable. Weaknesses Easy to bend and also easy to lose

# data[].attributes.body
bolt for tightening jaw
strength: it is very tight.
weakness it dosen't have much use after that.

# data[].attributes.body
It is a plastic tube that connected to the pump and nozzle. It took water from the pump to shoot out of the nozzle. 2 and a half inches long.
Strength: got the water out of the gun efficiently
Weakness: It couldn't be small reducing the pressure of water

# data[].attributes.body
This piece keeps the ink cartridges from falling out and snapping in half when pressure is applied by screwing into the pen base. It is 1 1/2 inches in length.
Strength: Protects the ink cartridges
Weakness: A vital part to the pen, if it's lost, the ink will fall out

# data[].attributes.headline
body holds together the parts it is plastic

# data[].attributes.subject
body holds together the parts it is plastic

# data[].attributes.body
Helps make sure the water does not spill if it is moved. It is plastic and blue. 1in Strengths Light and durable Weaknesses easy to lose

# data[].attributes.body
This connected the hose to the pump so it could pull water. Its half an inch tall and a quarter long.
Strength: Didn't leak
Weakness: Came off easy

# data[].attributes.body
jaw for moving

# data[].attributes.body
2. (16) pieces we did not bark nothing

# data[].attributes.body
These are the ink cartridges, they hold the ink and allow the pen to write, therefore they must be there for the pen to work. They are 3 1/2 inches in length, and are each different colors.
Strength: Holds ink inside the cartridge
Weakness: Fragile

# data[].attributes.body
this is our pen that we reversed engineered

# data[].attributes.body
mouth for moving

# data[].attributes.body
These help move the turtle across the table/water. It makes the body move and interact with things. The flippers are 2 by 2cm.

# data[].attributes.attachment_caption
A plastic winder witch is connected to a gear that turns the fins so its able to swim and is 1 in long and has no weaknesses

# data[].attributes.body
Helps get the water to the tip of the gun to shoot it out. They are plastic. 2in Strengths Light and durable Weaknesses easy to lose

# data[].attributes.body
These hold the gears and springs together that way nothing moves/falls out. This is good because without it all the gears wouldn’t stay in place and they wouldn’t move. They are 3 ½ cm by 1 ½ cm

# data[].attributes.headline
The trigger makes the gun shoot the spring when you release the trigger and the spring pushes the piston back out which makes more space for the gun 

# data[].attributes.subject
The trigger makes the gun shoot the spring when you release the trigger and the spring pushes the piston back out which makes more space for the gun 

# data[].attributes.attachment_caption
These pieces are part of the engine/is the engine, the engine and its pieces help make the glowing eyeball hop 

# data[].attributes.body
These two parts came together and held the spring and pumped out water. The brown one is half an inch tall and wide. And the white one is 1 inch long.
Strengths: the pump pulled water and the trigger shell made the pump work.
Weakness: The spring came loose a couple times.

# data[].attributes.body
When you twist this, it interacts with all the gears and makes the turtle move. This is a major part of the turtle, without it you couldn't move the turtle. The gears are White gear: 2cm by 1 ½ cm|| 1blue gear: 1cm by ½ cm || 2blue gear ½ cm by ½ cm

# data[].attributes.body
When the gears turn this stretches out and then recoils causing the turtle to move. This helps the turtle move, without it, it would just stay in place without movement. These are 5cm by 4cm

# data[].attributes.body
spring for engine

# data[].attributes.body
These small devices snap onto the top of the ink cartridge,  allowing you to chose the color of ink you desire. By simply pushing the bump, it forces the ink cartridge you want out into the pen lid so you may start writing. They are 1 1/3 inches in length.
Strength: Firm material, easy to use
Weakness: Gets stuck in the pen base often

# data[].attributes.attachment_caption
The fins are meant to push water so he can swim and is 4 in long with no weaknesses

# data[].attributes.headline
The water tube and the water revisor helps the water to get to the trigger

# data[].attributes.subject
The water tube and the water revisor helps the water to get to the trigger

# data[].attributes.body
Together opened the pump. It went into the trigger shell and pump.
Strength: Worked well
Weakness: uncomfortable

# data[].attributes.body
When you twist this is causes all the insides to do their part and move the turtle. When twisted this, it interacts with all the gears and makes the turtle move. These are 2cm by 2cm

# data[].attributes.body
These are the springs that make it possible for the ink to go down into the pen lid, and, when ready, they will release, shifting back into place. Without the spring, the pen would be unusable. In length, they are about 2 1/2 cm.
Strength: Material is metal, so wont tear in half
Weakness: Very flexible, easy to bend

# data[].attributes.body
head for the face

# data[].attributes.body
These are small but have a big part by holding the stomach and head and shell together. Without it, this wouldn't work at all. These are ½ cm by ⅖ cm.

# data[].attributes.body
These things you wouldn't know would exist they went inside the brown things two ends they worked to increase pressure of water. Both of them combined are half an inch tall.
Strength: made it shoot better
Weakness: none

# data[].attributes.headline
Water cap makes sure that the water does not move a spills

# data[].attributes.subject
Water cap makes sure that the water does not move a spills

# data[].attributes.body
engine for body

# data[].attributes.body
This is a spring, this is one of the most important part of our pen since pens are spring loaded.

# data[].attributes.body
This held the water in but allowed for refilling.
Strengths: Didn't leak
Weakness: it could come out all the way

# data[].attributes.attachment_caption
this is the piece that helps the fins push water and is 2 in long and is easy to bend

# data[].attributes.attachment_caption
Its a thin metal swirled into a loose circle, it is apart of the motor. It helps the motor run, if it was not there the motor wouldn't work. The coil is 13.5 in