# data[].attributes.body
Gluing banana back together

# data[].attributes.body
Fav pot head

# data[].attributes.body
Sprayed in robins egg
Lip dip 1 Castile blue
Lip dip 2 Cappuccino

# data[].attributes.body
I donated this small bowl. It’s marbled clay with clear glaze over and carvings on the sides.

# data[].attributes.body
I made these two bowls and they’re being refired with a layer of robins egg on the outside. The inside has low fire crystal glaze.

# data[].attributes.body
This bowl has Turkish amber with Castile blue on the lip. The one on the right is genies purple with panama red sprayed on top. The middle bowl is 1 coat of panama red and 2 genies.

# data[].attributes.body
The right one is Castile blue on the inside which ran and is currently being refired to cover the exposed spots, the outside is antique blue. The small bowl is sprayed cream with sensor midnight bubble glaze. The front bowl is stevies opal and spring green over wax resist.

# data[].attributes.body
The small yellow bowl was a crystalline glaze tester that came out perfect, the second is white with cappuccino bubbles on the inside.

# data[].attributes.body
This is layers of rain bow slip that was carved and sponged away. I put clear glaze over the top and sanded the spots once it had been bisque fired.

# data[].attributes.body
I left the hearts in until they were all cut and the handle was on to keep it from breaking. once it was finished i popped ‘em out and rounded the edges.

# data[].attributes.body
I used an xacto knife to cut out my designs. As far as improvement, i dragged out this process and made it harder on myself as it dried. I made a couple of the stencils superrrr close when i cleaned them up and nicked my inner vessel a couple times. Nothin you can’t fix up tho!

# data[].attributes.body
pretend you don’t see the handle so this is time accurate <3
I printed heart stencils and used a water based marker to transfer and space my design

# data[].attributes.body
This is the inspo pic i found. It’s a double vessel with a carved outter cup which meant that I had to throw two forms that fit together and then join them.

# data[].attributes.body
let’s get mugged

# data[].attributes.body
digging out sucks!! testing size

# data[].attributes.attachment_caption
stinky stout gave me a nose demo to improve anatomical accuracy 😎🤟

# data[].attributes.body
The original foot cracked in the fire so we chiseled it off and gorilla glued a rope foot.