# data[].attributes.body
I think all the art lessons teach me something new. Never give up. I always thought my artworks were bad. But in my head, I thought, never give up.

# data[].attributes.body
Print Making Reflection :

I enjoyed making the print making and I found that the print making was really fun

# data[].attributes.body
I enjoyed the printmaking sessions even though my last artwork did not go well. I enjoyed using the styrofoam as my stamp and also drawing my stamp artwork. What I did not enjoy in this printmaking lessons is the fact that the paint drys up very fast and I had to keep asking the teacher to refill the tray of paint. I remember drawing out the positive and negative parts on my styrofoam. Even though my artwork wasn’t the best, I still enjoyed this experience. If I have more free time during the holidays, I would definitely try to do printmaking by myself, using the information that the teacher had taught me. That is all I have to say for my last reflection and about this printmaking experience! Wish u guys a great holiday!

# data[].attributes.headline
            I love doing printmaking but sometimes things get messy. Got once i accidently spilled paint on my shirt . It took me about 1 week to clean it off anyways i am hoping that next year there will be more of such activity

# data[].attributes.subject
            I love doing printmaking but sometimes things get messy. Got once i accidently spilled paint on my shirt . It took me about 1 week to clean it off anyways i am hoping that next year there will be more of such activity

# data[].attributes.body
1.I enjoyed carving out the design on the styrofoam.2.The difficulty i faced was trying to print the paint onto the paper.3. I overcame my difficulty by using a paintbrush to evenly spread the paint on my styrofoam.

# data[].attributes.headline
I paint purple thing. Purple thing is tall tower. Very nice tower. Yayayayayayay

# data[].attributes.subject
I paint purple thing. Purple thing is tall tower. Very nice tower. Yayayayayayay

# data[].attributes.headline
I like the printmaking process . I struggle to finish it in time. I quickly finished it.

# data[].attributes.subject
I like the printmaking process . I struggle to finish it in time. I quickly finished it.

# data[].attributes.body
Ong Zhen yu

# data[].attributes.body
I learnt about positive and negative in printmaking. I also learnt that we need to be careful with the paint so we don’t stain our clothes. The difficulties I faced is the paint getting messy as I was not careful enough. I liked making the negatives and positives in my styrofoam and also transferring the print on the paper.

# data[].attributes.body
1.I learnt about the positive and negative sides of print making I also learnt about how to evenly roll the paint and make small and non complicated prints

# data[].attributes.body
☝️ challenge I face is making sure that the 🎨 is even on the styrofoam.

I enjoy ✍️ the 🇸🇬 icon.📑

# data[].attributes.body
1. I enjoy the print making sections was because it was new to me and it was super interesting to learn about negative and positive areas.

2. One of the challenges i faced was the queue of the sink,it was super lang when i got to the sink and i was quite frustrated by it but from that , i learned how to be patient and i can wait in line for 30 minutes.

# data[].attributes.body
1.i have enjoyed using the iPad to learn.

2. One. Of the challenges I got was to paint the paper properly without any mistakes.

3. I over came that Challenge by practising over and over again.Now I can finally paint properly most of the time but sometimes I still make small mistakes.

# data[].attributes.body
-

•it is fun and entertaining

-

• it will make your clothes dirty

• if you press too hard it will be hard to see the print and it you press too light it will be hard to see the print

# data[].attributes.body
WOW

# data[].attributes.body
I enjoy the part where we put the styrofoam on the a5paper

# data[].attributes.body
I enjoy doing free drawing during my art lessons as I can let my imagination run wild. I faced challenges as when we did print making, my group kind of left me out so I just waited for them to finish printing then only start printing.

# data[].attributes.body
1. I enjoyed the printmaking session as painting and trying to have a print was very fun .

2. I found that there was a long queue while waiting for the paint. We can overcome this challenge by sharing the paint instead of pushing each other.

# data[].attributes.body
Firstly,i enjoyed carving and painting the styrofoam.challenges i face during the p5 premaking leson is that i could not carve the styrofoam deep enough and the paint end up in the holes.i overcome it by carving properly in the next lesson.

# data[].attributes.body
Something I enjoyed:

I enjoyed cutting out the print in the styrofoam.

A challenge I overcame:

I took too much paint so I used a tissue to get it off

# data[].attributes.body
I did not enjoy the print making session

as I had a lot of challengesI did not know how to draw anything . I didn’t overcome any of it

# data[].attributes.body
I enjoy the printing art as we can use paint and print it on the paper and we do not need to paint the paper.l faced challenges like having to much paint on the styrofoam.So I added lesser paint on the roller.

# data[].attributes.body
I enjoy the creaating video as we are grouped together and we can bring our own toys to create a video teaching us tobe creative. I faced challenges when I forgot to bring my toys.

# data[].attributes.body
I loved the art lessons because it was fun. I didn’t have any challenges. And our teacher teaches very well.

# data[].attributes.body
Print making was difficult as it was hard to print out the pattern. There was also a long like at the sink to wash the brushes. But it was fun as we laughed about how we could do better.

# data[].attributes.body
I enjoy carving the design in the styrofoam in design printing,the a5 one about a Singapore icon was fun.But a difficulty I faced while making the print was that there was wind and I dropped paint onto my skirt. I overcame it by being careful when holding the styrofoam with wet paint onto it.

# data[].attributes.body
I struggled with the printing as the paint had blank holes very OFTEN I tried like 5 times until it actually worked I printed the same thing 5 times on the same paper, I enjoyed carving the styrofoam

# data[].attributes.body
I tried alot of tiket but it still wouldnt work :(

# data[].attributes.body
My reflection.

# data[].attributes.body
This is my art work. I really think i did a great job.

# data[].attributes.body
This is my artwork…Its not really that nice soooo. Yea

# data[].attributes.body
The printmaking styrofoam that I used to print my artwork.

# data[].attributes.body
My printmaking artwork, showing a picture of Marina Bay Sands.

# data[].attributes.body
😭 what happened to that thing!?!!?!

# data[].attributes.body
Think I pressed WAY too hard :/

# data[].attributes.body
I don’t know if it’s okay… um…. 😶