# data[].attributes.body
This was m first bowl attempt, I had tried to carve it out from a half circle of clay and then added these hill-like divots to add some texture.

# data[].attributes.body
This bowl as you can see wasn't very structurally sound and it was all uneven and also had too much texture inside.

# data[].attributes.body
I tried to make it smoother, but ended up making it too thin and it collapsed on itself after I tried to add a lily-pad foot to it.

# data[].attributes.body
For this bowl attempt, I decided to roll out a piece of clay and then shaped it on top of a bowl and allowed it to dry for about a day with loose covering. After I took it off, it was already pretty smooth and structurally sound. I made it smooth on the edges before doing anything. After that, I added a lily pad on the inside instead and that was more sufficient than putting it at the bottom.

# data[].attributes.body
After that, I decided on now adding the frog eyes since the bowl was even at the top and smooth, I did this by cutting out a thin circle and cutting it in half and adding it to the bowl.

# data[].attributes.body
With the ears came the feet, I rolled out even balls and smooshed them onto the bowl and made sure they were flat so that I could place the bowl down.

# data[].attributes.body
The lily-pad lacked depth and looked like a Pac-Man.

# data[].attributes.body
To make it more like a lily-pad, I carved out the pac-man looking  structure to add more depth t it and made it look more like a lily-pad.

# data[].attributes.body
First what I did here is that Mr. Stout and I made a template and I used that to roll out a flat piece of clay and then attached it to the other side by making a ramp of each opposite side.

# data[].attributes.body
For the bottom of the mug, there was no bottom, so I rolled out another piece of thicker clay and made a circle and attached that to the bottom.  After that I made a thinner circle and cut that in half and attached the frog eyes.

# data[].attributes.body
To make the handle of the mug, Mr. stout assisted me in making one and then I attached that properly watching the videos he sent to me on how to attach the handle. I had made about 4 before his help.

# data[].attributes.body
Once the mug was finished, I made sure it was smooth, signed my name, and put it on the firing rack.

# data[].attributes.body
For the base color, I mixed High Fire Evergreen with high fie white.

# data[].attributes.body
I didn't color the lily pad because I wanted it to be a different color from the frog, and I decided on mixing evergreen and yellow for a more plant green.

# data[].attributes.body
I used blue high fire underglaze and lavender to create this pink ish color for the frog mug, I wanted a different look for it.

# data[].attributes.body
I used Black and Pink high fire underglaze to create the face and used small paint brushes to achieve the look.

# data[].attributes.body
I then used Yellow and Pink high fire underglaze to make flowers with a small paint brush dotting onto it.

# data[].attributes.body
I used black and pink high fire underglaze to make the face with a small paint brush.