# data[].attributes.body
Objective :

1. To ensure the safety of the women or children at house.

2. To makesure every people need to use it before entering house.

3. To make things easy by checking either people in house or not.

# data[].attributes.attachment_link.title
Tinkercad| Door Bell | Door Bell Designing| Tinkercad designed circuit of Door Bell.

# data[].attributes.body
Objective

1. Enhanced Safety: The project demonstrates how piezo alarm buzzers can be used in safety applications, providing audible alerts for hazards, emergencies, and security breaches, thereby improving response times and reducing risks.

2. Customizable Solutions: By integrating sensors with Piezo buzzers, users can create tailored alert systems for various needs, showcasing the versatility and adaptability of technology in real-world scenarios

# data[].attributes.body
1. Prevent Overheating

•The temperature sensor can indicate if the current temperature is too high in order to inform people that cooling methods should be taken.

2. Home Safety

•Monitor house temperature in order to alert residents of high temperature if present.

3. Workplace Compliance

•Certain occupations require a safe temperature level to ensure environmental safety and can alert workers of any drastic changes.

4. Efficient Energy Use

•The temperature sensor can be used to optimize energy usage for cooling appliances.

5. Monitoring Household Appliances

•Household appliances such as ovens can overheat, and the temperature sensor can inform household residents.

# data[].attributes.attachment_link.title
Circuits ROOM TEMPERATURE CONTROLLER- Tinkercad

# data[].attributes.attachment_link.title
DIY thermometer using Atttiny85 on TinkerCAD

# data[].attributes.body
https://youtu.be/xdpNm6V-Hk8?si=6QJcew2LbqfAn2aJ

# data[].attributes.headline
"CHANGE PROJECT TITLE AND OBJECTIVE" - NEW "Door Lock Remote Control with LED Notification"

# data[].attributes.subject
"CHANGE PROJECT TITLE AND OBJECTIVE" - NEW "Door Lock Remote Control with LED Notification"

# data[].attributes.body
When the door is Lock Red Led will turn on and when its Unlock Green Led will turn on.

Objective:

To design and implement a remote-controlled door lock system using Arduino, which provides visual feedback on the lock status through LEDs. The system will utilize an IR remote to control the locking mechanism, where a red LED indicates the door is locked, and a green LED indicates the door is unlocked. The project aims to enhance home security by allowing remote access control and providing clear visual indicators of the door’s status.

Key Features:

1. Remote Control Operation: Use an IR remote to lock and unlock the door.

2. Visual Feedback: Red LED lights up when the door is locked, and green LED lights up when the door is unlocked.

3. Servo Motor Control: A servo motor will physically lock and unlock the door based on the IR remote commands.

4. LCD Display: An LCD screen will display the current status of the system (e.g., “LOCKED” or “UNLOCKED”).

5. Serial Monitoring: Serial output for debugging and monitoring the IR signals and system status.

This project will help you understand the integration of various components like IR sensors, servos, LEDs, and LCDs, and how to control them using Arduino. It also provides a practical application of these components in a home security system.

# data[].attributes.attachment_link.title
Lab6.2 Controlling LEDs using IR remote and Arduino UNO in Tinkercad

# data[].attributes.body
https://youtu.be/rRzHD7ONyog?si=in_pk3uPONITSxEe

# data[].attributes.attachment_link.title
Electronic Voting Machine Using Arduino UNO at Tinkercad   With I2C | EVM Circuit | Arduino Project

# data[].attributes.headline
Door Lock with remote and display during Streaming

# data[].attributes.subject
Door Lock with remote and display during Streaming

# data[].attributes.body
New Objective :

Develop an IoT-based door lock system that can be remotely controlled via a smartphone and provides real-time status updates on a display. The system will also integrate with streaming platforms to indicate whether the user is currently streaming. This feature enhances home security and convenience by allowing users to lock/unlock their doors remotely and monitor both the lock status and streaming activity through an integrated display.

# data[].attributes.attachment_caption
This video only for another add to project.

# data[].attributes.body
This help to show the display for make sure that anyone from outside to know if the door is lock or not.

# data[].attributes.attachment_link.title
{916} i2c LCD configuration with Arduino UNO in Tinkercad

# data[].attributes.body
1. Detect unauthorized access: Identify any illegal entry or tampering with property to prevent theft or intrusion effectively.

2. Deter theft: Discourage potential thieves or intruders from attempting to steal or break into the premises.

3. Trigger alerts: Activate alarms or notifications to alert owners, security personnel, or authorities of a potential breach.

4. Safeguard assets: Protect valuable belongings or important property from theft or damage by providing security measures.

5. Ensure quick response: Enable prompt action from security personnel, law enforcement, or property owners to mitigate potential losses.

# data[].attributes.body
objective

fire alarm is a device designed to detect and alert people to the presence of fire or smoke in a building or area. Its primary purpose is to warn occupants of a potential fire hazard.

1.Smoke detectors: Sensing smoke particles in the air.

2.Heat detectors: Sensing a rapid rise in temperature.

3.Manual pull stations: Allowing people to manually trigger the alarm.

4.Sound and light signals: Sirens, bells, or flashing lights to grab attention

# data[].attributes.attachment_link.title
Fire Alarm System Project by Interfacing Arduino with Temperature & Gas Sensor || TinkerCAD Projects

# data[].attributes.body
1. Provide precise timekeeping, often synchronized with atomic clocks or internet time servers.

2. Offer a straightforward, easily interpretable display of the current time.

3. often include alarms, timers, date displays, and even weather or temperature readings.

4. Digital clocks are widely used in devices such as smartphones, computers, and appliances, providing instant time information.

# data[].attributes.body
Objective:

1. To monitor water level

Continuously monitors the water level in the tank to ensure there is enough supply for domestic or industrial use, while also preventing overflow.

2. To prevent overflow

When water reaches maximum capacity, thereby preventing runoff or spillage from the tank.

3. To use water efficiently

By keeping track of water consumption and tank levels, a water monitoring system helps optimize usage, reducing wastage and runoff, which could occur due to overfilling.

# data[].attributes.attachment_link.title
Smart Water tank Level monitoring system using TinkerCAD | Automatic water level control | IoT appln

# data[].attributes.body
Objective:

1. Presence detection

Ultrasonic Sensors detect objects regardless of color, surface, or material. It is used in automatic doors or security cameras.

2. Enhanced security

By using ultrasonic sensor, you can pinpoint the incoming intruders or persons location whenever it passes the sensor.

# data[].attributes.body
Objective:

1. Develop a secure access system: Using an Arduino board, create and implement a password-protected door lock system that makes sure only authorized users can open the door.

2. Integrate a user-friendly interface: Make a keypad interface that lets people unlock the door by entering a password.

3. Enable password customization: Provide users with the ability to create and modify passwords in order to increase system security and flexibility.

4. Implement error detection and feedback: After entering a password, provide immediate feedback via an LCD display indicating whether access is allowed or denied.

5. Ensure system reliability and security: Create security measures to stop unwanted access, including a cap on the amount of bad password tries before a lockout occurs.

6. Simulate and test the system using Tinkercad: Before putting the system into real use, simulate it with Tinkercad to make sure it works and to find areas for improvement.

# data[].attributes.attachment_link.title
Password Door Lock Using Arduino | Arduino Project | Tinkercad Tutorial

# data[].attributes.body
Objective

1. Develop a remote-controlled door lock system for enhanced security.

2. Enable users to lock and unlock doors via a mobile device or remote controller.

3. Provide real-time access control and monitoring features.

4. Ensure secure and convenient user authentication for door access.

5. Integrate notification alerts for lock/unlock events.

# data[].attributes.attachment_link.title
How to make Remote Control Door Lock 🔒 At Home 🏠 | Diy Electronic

# data[].attributes.body
OBJECTIVE:

1. Energy Efficiency : Automatically turning on and off based on ambient light levels helps conserve energy by ensuring the light is only on when needed.

2. Convenience: Eliminates the need for manual operation, providing ease of use, especially in homes with children or elderly individuals. It also convenience to use in the office.

3. Safety: Enhances safety by providing illumination in dark areas, reducing the risk of trips and falls during the night. For example in the factory.

4. Cost Savings: Reduces electricity bills by preventing lights from being left on unnecessarily.

5. Environmental Impact: Contributes to environmental conservation by reducing overall energy consumption.

REFERENCE: https://www.youtube.com/watch?v=D1mg8dvwd3Y

# data[].attributes.body
1. Enhancing Security

Verifying vehicles that enter or exit the compounds, making sure only authorized vehicles are allowed

2. Prevent Unauthorized Access

Prevent unknown parties from entering the compound without verification with the system

3. Tracking and Monitoring

Track vehicles within the compound after entering

4. Improve Efficiency

Improve verification of vehicles with IoT components without manually verifying vehicles

5. Automate Entry Points

Automate entry points into the compound with IoT components while verifying them

# data[].attributes.attachment_link.title
IOT BASED VEHICLE VERIFICATION FOR SOCIETY SECURITY