# data[].attributes.body
My boat design met ALL/SOME/NONE of the design requirements.
1. Boat holds _____ pennies.
2. Boat DOES/DOES NOT float before pennies. Boat DOES/DOES NOT float after pennies.
3. Boat floats for ______ seconds.
4. Boat design is creative because _________. [See attached photo!]

# data[].attributes.body
My boat design met ALL of the design requirements.
1. Boat holds __20___ pennies.
2. Boat DOES float before pennies. Boat DOES float after pennies.
3. Boat floats for __20____ seconds.
4. Boat design is creative because _it combines a canoe bottom made of 2 halves of a cup taped together and covered with foil with a sort of sailboat design with the flags to show whether the boat tips when weight is added________. [See attached photo!]

# data[].attributes.attachment_link.title
Boat Building Challenge- Evaluate Photo.JPG

# data[].attributes.body
UPLOAD A PICTURE OF YOUR PLAN AND DISCUSS WHETHER CHANGED IT WHILE BUILDING: I did not stick to my plan, which you can see below. The sticks and straws on the bottom were not floating and seemed to add extra weight so I removed them. I kept the original shape of the boat similar, but added cups inside to keep the shape and make it sturdy. I added an additional flag (one on each side) so I could tell if the boat was tipping with added weight.

# data[].attributes.body
my boat design met all the requirements it floated for about 52 seconds in held different coins and a lot more then twenty pennies and it is creative I made it look like water bug

# data[].attributes.body
my boat meet some requeirments, it floated without pennies and floated with 6 pennies for 5 secondes my boat floats for a little and then tip over :( i think my boat is creative because i made some sort of raft with thematrails iwas given.i did not follow my plan but i did something simular

# data[].attributes.body
UPLOAD A PICTURE OF YOUR EVALUATE DATA TABLE AND DISCUSS IF YOU WERE SATISFIED WITH YOUR DESIGN OVERALL OR IF YOU WOULD CHANGE IT IF YOU GOT A DO-OVER:  Overall I was happy with how my design worked out and I would not change anything.

# data[].attributes.attachment_link.title
Boat Buildling Challenge Evaluate Data Table.JPG

# data[].attributes.headline
Vivian Katz                              My boat design met all of the design requirements. 1: Boat holds 20 pennies. 2: Boat does float before pennies. Boat does float after pennies. 3: Boat floats for 20+ seconds. 4: Boat design is creative because I made the tin foil look like a canoe and atached straws on the side. I also put tape on the corners of the tin foil to keep the water from seeping in. 

# data[].attributes.subject
Vivian Katz                              My boat design met all of the design requirements. 1: Boat holds 20 pennies. 2: Boat does float before pennies. Boat does float after pennies. 3: Boat floats for 20+ seconds. 4: Boat design is creative because I made the tin foil look like a canoe and atached straws on the side. I also put tape on the corners of the tin foil to keep the water from seeping in. 

# data[].attributes.body
below is the picture of my boat

# data[].attributes.body
My boat design met all all the design requirements. My boat held 20 pennies. My boat floated for more than 20seconds. Also my  boat design is creative because I used the foil to create the base of my boat then put cut up  sticks on the bottom to make it easier to float and add it 2 cups to add the pennies and to distribute the weight. I did not fallow my plan I did not add the straw because it would add more weight. I also cut up the sticks to help it float.
This is the picture of my boat

# data[].attributes.body
Holds 15 pennies
Floats both before and after pennies
Floats for 20 seconds

# data[].attributes.body
My boat design met all the  requirements . My boat held 217 pennies. It floated for more than 20 seconds. My design was creative because I combined the raft and canoe

# data[].attributes.body
i used all of the design requirements my boat held 16 pennies and it flouted more than 20 seconds i made it out of tin foil with popcicle sticks on the bottom on the boat with straws holding staring above the boat i tryed to make it look like a raft but since the weight of the pennies my boat sank before i could take a picture but this is what my boat looked like

# data[].attributes.body
My boat met all of the requirements and floated with and without the pennies. The boat would still be floating if I still had it. My design was creative as well.

# data[].attributes.body
My boat didn’t meet all the requirements, it did float with and without the pennies and it floated for 20sec and over and it was creative because it didn’t work so i had to modify it but i didn’t use 20 pennies. I could only put 7.

# data[].attributes.body
My boat met all the design requirements.

1-boat holds 110 pennies

2-boat floated before and after I put the pennies on

3-boat floated more than 20 seconds

4- boat had a creative design because I used tape to prevent water from leaking in.

# data[].attributes.body
My boat met all the requirements and was able to hold a lot more weight than planed (20+ coins). It was sort of a mix of a barge and a sailboat, Wright he flat bottom of the barge and the little flag. Overall, not exactly my plan (because I partially forgot it...) but it worked :)

# data[].attributes.body
my boat met all the requirements and i had fun too.

# data[].attributes.body
My boat design met ALL of the design requirements.
1. Boat holds 20 pennies.
2. Boat DOES float before pennies. Boat DOES float after pennies.
3. Boat floats for _30+ minutes.
4. Boat design is creative because I used an idea from diving bells. 

# data[].attributes.body
I added more coins xd

# data[].attributes.body
I am pretty satisfied with my results, and I think I did a good job :)

# data[].attributes.body
My tiny little barge.

# data[].attributes.body
My boat met all the design requirements.
1: Boat holds 20 pennies.
2:Boat floats before and after pennies.
3: Boat floats for 20 seconds
4:Boat design is creative because it is basically a barge, but I also built it very light so it could hold the pennies.

# data[].attributes.body
this is my boat

# data[].attributes.body
I wouldn't change my plan now. I did change it from the original plan by adding a base.

# data[].attributes.body
. Boat holds 47 pennies/coins.
2. Boat does float before pennies. Boat does float after pennies.
3. Boat floats for 10 minutes.
4. Boat design is creative because I added flags on to.

# data[].attributes.body
My boats met all the requirements because it held afloat for a long time, it held more than 20 pennies and it stayed and didn’t sink for some time.

# data[].attributes.body
My boat was a success. It did not sink and held all the pennies that I had. It floated for a long time and never sank.

# data[].attributes.body
I worked hard on this and it took me a while. When I put it in the water it decomposed.  My boat flouted 40 seconds then filled with water :(

# data[].attributes.body
my boat held 34 crayons because i didn't have pennies also it held for 2 min t hen it sunk when i added more crayons. My boat was also a mix of a sail boat and a viking boat  My boat was creative because i added a sail and and paddles to balance weight and also put straws on the bottom and also added the bottom of the cups to add are and buoyancy . My boat also floated after and before i put the crayons in. Also My boat met all the design requirements because my boat floated for more than 20 seconds it held with and without the  crayons also it had a creative element .Also i did stick to my plan. Here is a photo of my Boat.

# data[].attributes.body
It held 103 coins and stayed afloat for over 3 minutes.

# data[].attributes.body
here is my evaluation page

# data[].attributes.body
My boat met all the requirements. It held 40 bead (I didn't have pennies.) I \t floated for 20 seconds after I added them.

# data[].attributes.body
My evaluate table

# data[].attributes.body
My boat meet all of the requirements.
1. My boat holds 20 pennies (it could probably hold more but i couldn't find any more)
2. My boat DOES float before and after pennies.
3. Boat floats for 20 seconds
4. My boat is creative because even though it looks a little boring it still works and since it wouldn't be a lot of weight I cut the cup in half. It is also creative because the two straws are like sails and are really helpful.
I didn't have any changes to mine.

# data[].attributes.body
it met most of the things need here is pic

# data[].attributes.headline
My boat was made of four popsicle sticks, 9 straws, and two cups. It also held 4 pennies 

# data[].attributes.subject
My boat was made of four popsicle sticks, 9 straws, and two cups. It also held 4 pennies 

# data[].attributes.body
Elliot

# data[].attributes.headline
i floated for 2 minutes and held 20 pennies i never knew that it would float that long

# data[].attributes.subject
i floated for 2 minutes and held 20 pennies i never knew that it would float that long

# data[].attributes.body
Nicholas

# data[].attributes.body
It held 20 pennies and it floated until I took it out

# data[].attributes.body
Path A:

Work on your Padlet OR Flipgrid.

Step 1:  Fill out the yellow sections of the reflection questions below.

Part 1: Was our design successful?
My boat design met all/some/none of the requirements.
The requirements I met were good. (holds 20 pennies, floats on water, stays afloat for at least 20 seconds, creative)
I could tell I met these requirements because  I did not struggle __________.
Part 2: Did you make any changes?
I did/did not build my boat exactly as I planned it because I did not make changes from the original __________. Changes I made to my plan while building were ___________. I made these changes because ________.
Part 3: How was your experience?
Overall, my experience building my boat was good__________.The design cycle, or prototyping, helped with this challenge because it helped me plan_________.
Part 4: Challenge
The design cycle process was similar in the Marshmallow and Boat Building Challenges because we did prototypes and did all the steps_________.. It was different because we built something different _________.I found boat_________ Challenge easier and marshmallow _________ Challenge more difficult because in e marshmallow challenge it was hard to keep mine standing._________.Lessons I’ve learned are planing more_________.

# data[].attributes.body
My boat design met all/some/none of the requirements.most

The requirements I met wereholds 20 pennies, floats on water, stays afloat for at least 20 seconds. (holds 20 pennies, floats on water, stays afloat for at least 20 seconds, creative)

I could tell I met these requirements because  i saw each requirement on the boat

I did/did not build my boat exactly as I planned it because i was gonna attach a cup but i made a hole and it sunk.

Changes I made to my plan while building were not using the cups. I made these changes because it would take a lot of time

The design cycle process was similar in the Marshmallow and Boat Building Challenges because you had to do all the same steps. It was different because you had different challanges

I found he marshmellow Challenge easier and boat challange Challenge more difficult because _for the marshmallow you didn't have to put that much additional weight but in the boat you had to put a lot

Lessons I’ve learned are use your brain

# data[].attributes.body
it held 20 pennies for 23 seconds

# data[].attributes.headline
Lior                                                                  

# data[].attributes.subject
Lior                                                                  

# data[].attributes.body
I met all the requirements. First, 20 pennies or more can hold on the boat. Second, the boat floated without any pennies and with them too. Third, the boat was standing for 180 seconds or more.

# data[].attributes.body
my boat design met some of the requirements.
1. It held 0 pennies

2. It does float when there is not pennies on it but doesn't float when there are.

3. Boat floats for 20 seconds

4. I think my boat is creative because it was a combination of a raft and a box kind of.

I didn't build my boat exactly how i planned because i used tin foil and I didn't put a cup on top of the raft. I did this because i knew that tin foil floated so i decided to make walls with it. I didn't put a cup on top of it because it was just way to big for the raft.

overall my experience building my boat was good. The design cycle, or prototyping, helped because if I only tested it at the end it would't have worked.

The design cycle process was similar in the Marshmallow and Boat Building Challenges  because we all investigated first. It was different because it had different materials. I found the marshmallow challenge harder because I didn't know what prototyping is. I found boat building easier because I prototyped. The leasons I have learned to prototype.

# data[].attributes.body
my boat didn't meat all the design requirements it didn't hold 20 pennies my boat sank

# data[].attributes.body
This is my boat it floated for a few hours but I made a few changes then it sank it was holding in between 50 to 100 pennies

# data[].attributes.body
Here is my evaluation table

# data[].attributes.body
My boat holds 9 pennies. It did not flow for very long with the pennies. But it floated without them.

The Boat floats for 12 seconds with the pennies.

I learned that sometimes you are going to have to change your work because you won't always get it right on the first time, So you have to try your hardest and it's ok to fail.

# data[].attributes.headline
This is a picture of my boat floating with the 20 pennies inside.

# data[].attributes.subject
This is a picture of my boat floating with the 20 pennies inside.

# data[].attributes.body
Part 1: Was our design successful? (sorry I did this on another account to so you will see my pic twice)
My boat design met all/some/none of the requirements.
The requirements I met were _perfect_. (holds 20 pennies, floats on water, stays afloat for at least 20 seconds, creative)
I could tell I met these requirements because  _it did them all_.
Part 2: Did you make any changes?
I did build my boat exactly as I planned it because _my design was pretty good_. Changes I made to my plan while building were _none_. I made these changes because I didn’t.
Part 3: How was your experience?
Overall, my experience building my boat was _awesome. The design cycle, or prototyping, helped with this challenge because _it worked_.
Part 4: Challenge
The design cycle process was similar in the Marshmallow and Boat Building Challenges because _it was the same design cycle_.. It was different because _they were different challenges. I found _boat Challenge easier and _marshmallow_ Challenge more difficult because _the marshmallow I didn’t prototype. Lessons I’ve learned are _always prototype_.

# data[].attributes.body
Noah Sonn-Lees
My boat design met ALL of the design requirements.
1. Boat holds 20 pennies.
2. Boat DOES float before pennies. Boat DOES float after pennies.
3. Boat floats for 1min+_ seconds.
4. Boat design is creative because it is a capsule design that no one else used.

# data[].attributes.body
My boat did follow the design requirements. It held 100 pennies. It floated before and after I put the coins in the boat. The boat was a raft mixed with a sort of like sail boat. Here’s a pic of my boat

# data[].attributes.body
My Boat met 3 of the 4 design requirements. My boat floated for at least 9 hours, and held 20 pennies in the process of it!

# data[].attributes.body
Part 1: Was our design successful?

My boat design met all/some/none of the requirements.

The requirements I met were yes. (holds 20 pennies, floats on water, stays afloat for at least 20 seconds, creative)

I could tell I met these requirements because it held 64 pennies and floated for around10 minutes

Part 2: Did you make any changes?

I did/did not build my boat exactly as I planned it because at first the boat had a big gap in the front so i reinforced the hole thing in tin foil

Changes I made to my plan while building were reinforced. The whole thing in tin foil  I made these changes because there was a gap in the front if the boat

Part 3: How was your experience?

Overall, my experience building my boat was pretty good

The design cycle, or prototyping, helped with this challenge because it helped to follow the steps

Part 4: Challenge

The design cycle process was similar in the Marshmallow and Boat Building Challenges because they both stood/floated. It was different because i feel like i did a better job at the boat build then the marshmallow challenge

I found boat Challenge easier and marshmallow Challenge more difficult because i had a good idea/plan what i was gonna do for the boat build and was more prepared

Lessons I’ve learned are have a good idea on what to do and don't rush.

# data[].attributes.body
My boat design met all/some/none of the requirements. The requirements I met were some. (holds 20 pennies, floats on water, stays afloat for at least 20 seconds, creative)I could tell I met these requirements because I counted well the boat was floating and I used straws to help it float which is creative.

1. Did you build your boat exactly as you planned it, or did you make changes to your design? Why? If you made changes, describe what you did differently from your plan and why.

I did not build my boat exactly as I planned it because I put tin foil around the straws.  Changes I made to my plan while building were putting tin foil around the straws. I made these changes because I didn’t want water to get in the straws.

1. Overall, how was your experience building your boat in the Boat Building Challenge? How did the design cycle, or prototyping, help with the Boat Building Challenge?

Overall, my experience building my boat was ok. The design cycle, or prototyping, helped with this challenge because without it I wouldn’t have had a plan.

1. Challenge (optional): How was the process of using the design cycle similar in the Marshmallow Challenge and Boat Building Challenge? How was it different? Did you find one of the challenges easier or more difficult than the other? What, if any, lessons did you learn? Explain.

The design cycle process was similar in the Marshmallow and Boat Building Challenges because we had to plan. It was different because we were building different  things. I found the boat building challenge easier and marshmallow Challenge more difficult because it was very hard getting the tower in the marshmallow challenge to stand up. Lessons I’ve learned are to never give up. If I gave up I would not have gotten my tower to stand up or my boat to float.

# data[].attributes.headline
 My boat design met all of the requirements. The requirements I met were my boat stayed a float for more than 20 seconds, holds 20 pennies and floats on water. I could tell I met these requirements because  my boat floated.  I slightly build my boat exactly as I planned it because I used the materials and the plan that I drew. The changes I made to my plan while building were  I added more tape than I expected I would need. I made these changes because  when my boat became wet the popsicles began to fall apart. Overall, my experience building my boat was good, I was able to build a boat that floats. The design cycle, or prototyping, helped with this challenge because it helped me to think and plan my design and it helped me to test out my plan to see if it would work.The design cycle process was similar in the Marshmallow and Boat Building Challenges because we had to build something and test out our plan. It was different because one you had to make a boat and the other one we had to make a tower. I found the boat challenge easier and  the marshmallow challenge more difficult because my tower kept falling when I built my marshmallow tower. Lessons I’ve learned are to be careful when I am building, I have to be gentle with my materials so they do not break or rip.

# data[].attributes.subject
 My boat design met all of the requirements. The requirements I met were my boat stayed a float for more than 20 seconds, holds 20 pennies and floats on water. I could tell I met these requirements because  my boat floated.  I slightly build my boat exactly as I planned it because I used the materials and the plan that I drew. The changes I made to my plan while building were  I added more tape than I expected I would need. I made these changes because  when my boat became wet the popsicles began to fall apart. Overall, my experience building my boat was good, I was able to build a boat that floats. The design cycle, or prototyping, helped with this challenge because it helped me to think and plan my design and it helped me to test out my plan to see if it would work.The design cycle process was similar in the Marshmallow and Boat Building Challenges because we had to build something and test out our plan. It was different because one you had to make a boat and the other one we had to make a tower. I found the boat challenge easier and  the marshmallow challenge more difficult because my tower kept falling when I built my marshmallow tower. Lessons I’ve learned are to be careful when I am building, I have to be gentle with my materials so they do not break or rip.

# data[].attributes.body
Overall I was happy with how my design worked out and I would not change anything because it floated for a while, held all the pennies, and I think it was creative.

# data[].attributes.body
My boat met all requirements it held 43 plus pennies I ran out. My boat does float before and after pennies it floated for at least 20 seconds It is creative because it is a mix of raft and canoe

# data[].attributes.body
My boat held twenty pennies and floated for a little bit over 1 minute. It was pretty slanted at the end. I added a sail but it fell off. (Mine kinda looked like a Moana boat!) uwu

# data[].attributes.body
mine holds 24 pennies and for 20 seconds

# data[].attributes.body
My boat met all the requirerments.
It held 20 pennies and floated for 20 seconds.

# data[].attributes.body
My boat held 20 pennies and could probably float until the cups got soggy enough to sink but it was tilting a little bit so i had to spread the pennies.

# data[].attributes.body
20 pennies and  scissors

# data[].attributes.body
My boat held 20 coins and could have probably flloatted for the rest of the day. my boat tilted a bit bit did not fall.

# data[].attributes.body
My boat design met all of the requirements.

The requirements I met were that it held 20 pennies, floated on water, stayed afloat for at least 20 seconds, and was creative.

I could tell I met these requirements because it could hold way more than 20 pennies, it stayed afloat until i took it out and sunk it :>, and that i thought it was pretty creative since i didn't use cups (which a bunch of people used.)

Part 2: Did you make any changes? 
I did not build my boat exactly as I planned it because I changed so that it didn't have cups at the bottom but I stayed with the base.
Changes I made to my plan while building were that i removed the cup I made these changes because it helped it stay afloat.

Part 3: How was your experience?  
Overall, my experience building my boat was very good :D.
The design cycle, or prototyping, helped with this challenge because it helped me not waste as much stuff.

Part 4: Challenge
The design cycle process was similar in the Marshmallow and Boat Building Challenges because it helped organize my plan. It was different because it was a new thing.
I found the boat Challenge easier and marshmallow Challenge more difficult because the boat one was less complicated.
Lessons I’ve learned are that i needa time my time..

# data[].attributes.headline
William Vasquez-Garcia's Boat Building Challenge Photo

# data[].attributes.subject
William Vasquez-Garcia's Boat Building Challenge Photo

# data[].attributes.body
I was happy how my boat turned out because it met all the boat building expectations. It held 20 pennies for 20 seconds and was creative because I only used 1 material.

# data[].attributes.body
My boat design met ALL/SOME/NONE of the design requirements.
1. Boat holds 12 pennies.
2. Boat DOES float before pennies. Boat DOES NOT float after pennies.
3. Boat floats for more than 20 seconds.
4. Boat design is creative because I like how I changed my whole entire boat because my first boat couldn't even stay still.

# data[].attributes.body
My boat met all the requirements because it floated, and held 20 pennies. My boat held 20 pennies. My boat did float with and with out the pennies. It floated for about 4 seconds. I think my design was creative because I made a raft on the bottom and put  a piece of cup and under I put foil.

# data[].attributes.body
My boat met all the requirements because it floated and held all twenty pennies. My boat floated in the bathtub for 20 seconds with the pennies and also floated without any pennies. My design was very creative. I used all the materials needed and it was a great design. This project was very fun to do.

# data[].attributes.body
My boat design met all of the design requirements.
1. Boat holds 20 pennies.
2. Boat did float before pennies. Boat did float after pennies.
3. Boat floats for 60 seconds.
4. Boat design is creative because of the two structures that I used. There were popsicle sticks on the bottom and straws inside the aluminum foil boat. [See attached photo!]

# data[].attributes.body
My boat design met ALL/SOME/NONE of the design requirements.
1. Boat holds 13 pennies.
2. Boat did float before pennies. Boat did not float after pennies.
3. Boat floats for 30 seconds.
4. Boat design is creative because it had a lot of details. On the flag I put pennies that you would see on a pirate ship, and made it so the man was on the outside.
5. I stuck to the exact plan but I added more tape because the foil did not stay by itself. In the future I would use double sided tape.
[See attached photo!]

# data[].attributes.body
My boat design met some of the design requirements.
1. Boat holds 11 pennies.
2. Boat does float before pennies. Boat does float after pennies.
3. Boat floats for 13 seconds.
4. Boat design is creative because i tried putting decorations at  the bottom, i colored it orange to see if it'll come off. I stuck to my original plan did not make any changes.
5. I would decorate more and shape it more into an oval.
[See attached photo!]

# data[].attributes.body
My boat design met all of the design requirements.
1. Boat holds 20 pennies.
2. Boat did float before pennies. Boat does float after pennies.
3. Boat floats for 15 minutes.
4. Boat design is creative because it has a top layer.
5. Made changes to my design. Originally I wanted to make a raft but I thought it might sink so I added walls so that it wouldn't sink.  [See attached photo!]

# data[].attributes.body
my boat met all of the design requirements and it held 37 pennies, floated for around 30 minutes, and my boat design is creative because i used a pontoon to help it float

# data[].attributes.body
My boat design met ALL of the design requirements.
1. Boat holds _65__ pennies.
2. Boat DOES/ float before pennies. Boat DOES/float after pennies.
3. Boat floats for _60___ seconds.
4. Boat design is creative because ___I added a lot of tinfoil and put a hole in the top for "cargo"____. [See attached photo!]

# data[].attributes.headline
Gleyson Lebron's Boat Building Challenge

# data[].attributes.subject
Gleyson Lebron's Boat Building Challenge

# data[].attributes.body
My boat design met all of the design requirements.
1. Boat holds 9 quarters.
2. Boat did float before pennies. Boat does float after pennies.
3. Boat floats for 20 seconds.
4. Boat design is creative because I cut the cups in half because I thought it would help. I put the straws on for extra support but water got inside the straws. I liked the platform that I made. I put tinfoil and wrapped it around the popsicle stick. [See attached photo!]

# data[].attributes.body
My boat design met SOME of the design requirements.
1. Boat holds 6 pennies.
2. Boat does float before pennies. Boat did float after pennies.
3. Boat floats for 16 seconds.
4. Boat design is creative because I put popsicle sticks inside the aluminum foil. [See attached photo!]
5. I stuck to my plan and didn't make any changes.

# data[].attributes.body
My boat design met ALL/SOME/NONE of the design requirements.
1. Boat holds 15 pennies.
2. Boat does float before pennies. Boat does not float after pennies.
3. Boat floats for 5 seconds.
4. Boat design is creative because I was thoughtful about how much weight I put on my boat so it wouldn't sink.
5. I kept my boat the same as my plan.
6. I was trying to make it look fine and wanted it to be like a box and I inserted my coins.

# data[].attributes.body
My boat design met all of the design requirements. 1: Boat holds 20+ pennies. 2: Boat does float before pennies. Boat does float after pennies. 3: Boat floats for 20+ seconds. 4: Boat is designed with only tinfoil so it is lighter and that’s creative.

# data[].attributes.body
My boat design met NONE of the design requirements.
1. Boat holds 2 pennies.
2.  Boat DOES float after pennies.
3. Boat floats for 10 seconds.
4. Boat design is creative because I put the two cups and taped them together, and put tape on the bottom to cover the opening of the cup and then I used the popsicle sticks on each side, I also used the straws and put them on each side.
5. I built it exactly how I planned it.
6. I learned to never give up and to prototype.   [See attached photo!]

# data[].attributes.body
My boat design met ALL of the design requirements.
1. Boat holds 20 pennies.
2. Boat DOES float before pennies. Boat DOES float after pennies.
3. Boat floats for 30 seconds.
4. Boat design is creative because I tried doing a boat design that was simple that didn't float, I added aluminum foil and tried to remove the air from it and I spread the pennies in aluminum foil and spread them across the whole boat. [See attached photo!]

# data[].attributes.body
my boat met some the design requirements
My boat design met Some of the design requirements.
1. Boat holds 4 pennies.
2. Boat DOES float before pennies. Boat DOES NOT float after pennies.
3. Boat floats for 30 seconds.

# data[].attributes.body
My boat design met ALL/SOME/NONE of the design requirements.
1. Boat holds 7 pennies.
2. Boat DOES float before pennies. Boat did  float until the 8th penny.
3. Boat floats for 3 seconds.
4. Boat design is creative because I tried to make it as thin as possible so it can hold as many pennies and spread out the mass as much as possible.

# data[].attributes.body
Hi, my boat building challenge went well, it only held 4 pennies, but it float pretty well without them. Here is the photo:

# data[].attributes.body
my boat met all the design requirements
-boat holds 20 pennies
-boat floats with pennies
-boat is creative. i made it by making a surface of tin foil and putting on popsicle sticks to help the structure.
- i built exactly as planned
overall the boat building challenge was very fun