# data[].attributes.body
Concept: Energy Conversion
Steps: Place the toy in water and watch it move.

Explain: When I place the toy in water, chemical potential energy from my hands converts into electrical energy as water closes the circuit in the toy and turns it on. The electrical potential energy converts into kinetic energy when the toy starts moving. There are sensors at both sides of the toy that senses when it is in water and turns the toy on. The tail of the fish flaps randomly which enables it to move in water.
I hope I explained that right

# data[].attributes.body
Concept:Energy conversion

Candy Machine
Step:
1.move the bar which is below the other bar to the candy that you want to grab.
2.Press down the button which is on your left to move the claw inside down.
3.then hold down the bar which is on top of the bar which is suppose to move left and right.
4.then move the bar below it to move it around.
5.bring it to a hole and let go the bar you were holding just now.

Explain:
As you move the bar moved left ,right,up and down the inside will follow what you do ,When the candy is being grab and let go,gravitational energy is being converted into kinectic energy which made the ball roll down from the machine.

You could see that in this video i used coloured balls to represent candies.

# data[].attributes.body
Concept:Energy conversion

Candy Machine
Step:
1.move the bar which is below the other bar to the candy that you want to grab.
2.Press down the button which is on your left to move the claw inside down.
3.then hold down the bar which is on top of the bar which is suppose to move left and right.
4.then move the bar below it to move it around.
5.bring it to a hole and let go the bar you were holding just now.

Explain:
As you move the bar moved left ,right,up and down the inside will follow what you do ,When the candy is being grab and let go,gravitational energy is being converted into kinectic energy which made the ball roll down from the machine.

You could see that in this video i used coloured balls to represent candies.

# data[].attributes.body
Concept: Energy Conversions
Steps: turn on rc car and use remote to control the rc car.
Explanation:The batteries in the car and remote has chemical potential energy which is converted into electrical energy powering the car and alowing it to be controlled when it moves it produces kinetic energy which is converted to sound and heat energy.

# data[].attributes.body
emi auto blasters
Concept: Energy Conversions
Steps:Hold the small little orange button for the gun to power up.Then, press the trigger to see the dart fly out.

Explanation: When the orange button is being held, chemical potential energy  is being converted into electrical energy to power up   the electrical circuit inside the gun and when the trigger was pressed, electrical energy converts into kinetic energy, causing the dart to fly out .

# data[].attributes.body
Concept: Energy Conversion

1.  Press the back of the origami
frog.
2. Let you hand go and see the
frog jump.

Explanation:

When the back of the origami frog is pressed, it has elastic potential energy which is converted from chemical potential energy from our body. When it is released, the elastic potential energy is converted into kinetic energy and will 'leap' up to the air and land on the ground

# data[].attributes.body
Concept: Energy Conversions

Steps: 1. Press the car                                  downwards and pull it
backwards.
2.Afterwards, release the
toy car and it will start
to move.

Explanation:

When the car is pulled back, the car possesses elastic potential energy. When the car is released, the elastic potential energy in the car is the converted into kinetic energy, heat energy and sound energy, causing the car to move.

# data[].attributes.body
Concept=Energy Conversion
1.Inset the arrow into the bow.
2.Pull the arrow and the string backwards
3.Release the arrow.
4.The arrow will fly out.
Explanation
When we pull the string backwards, chemical potential energy from our body is converted to elastic potential energy.When we release the string,elastic potential energy is converted to kinetic energy in the arrow,causing the arrow to fly out.

# data[].attributes.body
Rubber duck

squeeze it and sound will be produced.

the potential energy stored in it will be converted into sound energy when a person squeezes it.
chemical potential energy(from the person)--->sound energy

# data[].attributes.body
Nerf semiauto blasters
Concept: Energy Conversions
Steps:Hold the small little orange button for the gun to power up.Then, press the trigger to see the dart fly out.

Explanation: When the orange button is being held, chemical potential energy  is being converted into electrical energy to power up   the electrical circuit inside the gun and when the trigger was pressed, electrical energy converts into kinetic energy, causing the dart to fly out .f S

# data[].attributes.body
Concept: Energy Conversions

Steps: Pull the Nerf Gun's handle backwards. By doing this the spring inside the gun is being compressed. Next release the handle.
The bullet which was used to make the spring compressed is now released and is flown out at where the gun is pointed at. The compressed spring will now go back to its original position.

Explanation: When the handle is pulled backwards. The spring is compressed which is because the spring possess' more Elastic Spring Force. When the handle is released the Elastic Spring Force is then converted into Kinetic Energy causing the bullet to fly to its maximum capability.

# data[].attributes.body
Slingshot

Materials:
2 chopsticks
11 rubber bands
1 teaspoon
1 bottle cap
rolled piece of paper

Steps:

Place the crumpled paper on the inside of the bottle cap

Pull back the bottle cap as far as it can go.

Release.

The crumpled paper will hit the wall.

Explain:

When the bottle cap is pulled back, the rubber bands connected to the bottle cap possesses more elastic potential. The moment the bottle cap is released, the gravitational force stored in the crumpled paper converts to kinetic energy as it is shot to the wall.

# data[].attributes.body
Electrical Powered Car
Concept:Energy Conversion
STEP:Turn on the switch which is behind the car and let the car go.

Explain:When the switch is turned on ,chemical potential energy in the battery energy will first convert into heat and light energy and then convert into kinectic energy ,then it will convert into electrical energy which allows the car move.

# data[].attributes.body
Rubber Band Powered Boat
Concept: Energy Conversions

Steps:
1.Turn the propeller
2. Release the propeller

Explanation:
When turning the propeller, the kinetic energy in our hand is converted into kinetic energy in the propeller. When the propeller is being turned, the rubber band is also turned and kinetic energy in the propeller will be converted into elastic potential energy which will be converted again into kinetic energy again and  turn the propeller in the opposite directions by itself and move the boat without needing pushing it.

# data[].attributes.attachment_link.keywords[]
Boats and boating--Equipment and supplies

# data[].attributes.body
Concept:Energy Conversions

Steps:
1.Turn on the switch.
2:Then let the car go.

Explain:when the switch is on,the chemical energy in the battery will be convert into electrical energy then electrical energy will be convert to sound and heat energy that is caused by friction.

# data[].attributes.body
concept: Energy Conversions

steps:
1. pull the cocking handle back, the spring would be compressed.
2.next,press the trigger and you will observe that the bullet would fly out of the gun. now, the spring would of back to its original length.

Explain: When the cocking handle is pulled back, the spring would possess Elastic potential energy. when released, the bullet possess kinetic energy when it is shot out.

# data[].attributes.body
Concept: energy conversation

Steps:
1.turn the knob at the back of the music box in a clockwise direction
2.wait for a while
3.the music box will play the music

Explanation:
The chemical energy from my hand is then converted to the kinetic energy when I turn the knob and lastly it converted to the sound energy .

# data[].attributes.body
Concept: Energy conversion
Steps:
1: turn the knob of the gatchapon
2: wait for the gatcha ball to drop out
3: open the gatcha ball
Explanation:
Kinetic energy from my hands converts into kinetic energy in the knob which then converts into gravitational potential energy in the gatcha ball .

# data[].attributes.body
Concept: Energy conversion
Steps:  Insert the key into the hole behind the electrical cable and turn it about 5 times, then hold it firmly onto the ground before letting it go after about 3 seconds.
Explanation:
When the key is being turned, the chemical potential energy inside the electrical cable is converted to electrical energy which powers up and activate the electrical cable inside. When the electrical energy is converted to kinetic energy, the teeth will start moving.

# data[].attributes.attachment_link.title
Yakity-Yak Talking Teeth Wind Up Toy 1949 Disneyland

# data[].attributes.body
8Concept:energy and it's conversion (heat and kinetic
Step: first , you pull the CAR TOWARDS you and the more is pulled , the further it goes
Then, just release and it will move
Explanation: when you pull the car on the ground , it causes friction. The heat energy caused by friction will then be converted into kinetic energy. When it is pulled more , the will be more friction caused and getting more heat energy that converts to more kinetic energy . Also ,the chemical potential energy stored in your hand is also converted into kinetic energy .

# data[].attributes.attachment_link.title
Auto Express | New and Used Car Reviews, News & Advice

# data[].attributes.attachment_link.description
Every new car reviewed and rated by Auto Express road test experts. Plus used car reviews, group tests and in-depth video reviews.

# data[].attributes.body
1.slip the ring on your arm or a rope
2.move your hand or rope upwards and observe it spin on your arm or rope.
3.move your arm or rope  downwards or move the ring back to your wrist and repeat steps 1 and 2.
explanation:when you slip the toy on your arm the kinetic energy from your arm is converted to gravitational potential energy(GPE) of the ring and then when you move your arm upwards the gravitational potential energy is converted to kinetic energy of the flow ring then the kinetic energy is converted to heat and sound energy.When you move the flow ring back to your wrist again the kinetic energy is converted to gravitational potential energy again.

# data[].attributes.body
1.Have a person bounce on the trampoline
2.See the trampoline go downwards
explanation:on a trampoline,the jumper will have more potential energy at the top of each jump.The elasticity of the trampoline gives the jumper more potential energy at the bottom of each jump.Kinetic energy is in the jumper.

# data[].attributes.body
1.Put the battery into the  car and remote control.
2.Turned on the car.
3. control the car with the remote control.
Explanation:
When the car starts moving, the chemical potential energy in the battery is converted to electrical energy, allowing the car to move.While it is moving the electrical energy is converted to kinetic energy which is then converted to heat and sound energy.
https://www.youtube.com/watch?v=aJqC-HdP2qE

# data[].attributes.body
1. Switch on the power
2. Switch on the power switch on the PS4
Explanation: The chemical potential energy in my fingers  gets converted into kinetic energy.When the power is turned on chemical potential energy is then converted into electrical energy,  bit of electrical energy gets converted into light energy and the kinetic energy in our fingers gets converted into kinetic energy in the controller which also powers the PS4

# data[].attributes.headline
Issac: RUBBER BAND GUN OOH ITS SO FUN xd

# data[].attributes.subject
Issac: RUBBER BAND GUN OOH ITS SO FUN xd

# data[].attributes.body
Concept: Energy conversion
Steps
1 Place rubber band in loading position.( Where the cut made by penknife is made)
2. MAKE SURE RUBBER BAND DOES NOT AUTOMATICALLY FLY AWAY!
3 Push the lever up.
Explanation:
When I STRETCHED  the rubber band, Chemical potential energy from the food that I ate that was stored in my fingers got converted into Elastic potential energy which was stored in the rubber band.
Then, when I pulled the lever, my CPE (yet again) got converted into Kinetic energy where I moved the lever and then the EPE in the rubber band got converted into kinetic energy so that is why the rubber band moved. Dont forget, there is sound energy and some heat energy when the rubber band touches the wall

# data[].attributes.body
Concept: Energy Conversion
Steps:
1. Press the toad firmly to the ground for a few seconds
2.Let it go and it will jump up

Explanation:
The chemical potential energy stored in my fingers were converted into kinetic energy in order to press the toad.When the toad was pressed, the spring in it was compressed. As I release it, the elastic potential energy stored in the spring was converted into kinetic energy which allows the toad to jump up. There is also heat energy in the process when the jumper touches the floor which creates friction force.

# data[].attributes.body
When the Orange thing which is connected to a string was pulled,elastic potential energy is created. When I pressed the release button,the string contracted,kinetic energy is created and the bullet travels to the wall. When the bullet hits the wall,other forms of energy is created.

# data[].attributes.body
Rubber Band Powered car
Steps:
1.  Twist/turn the rubber band several times.
2. Release the rubber band.
3. Watch it move.

Explanation:
When we turn the rubber band several times, the chemical potential energy stored in us is converted to elastic potential energy in the rubber band. When we release the rubber band, the elastic potential energy in it is then converted to kinetic energy and heat energy due to friction as it moves on the floor.

# data[].attributes.body
Slingshot
Step 1.Put an object on the slingshot
Step 2. Pull the rubber band
Step 3. Let go of the rubber band
Step 4. Watch the object on the rubber band fly
Explanation:
When the rubber band is stretched, it posses elastic potential energy. When the rubber band is released, the elastic potential energy is then converted to kinetic energy which enable to sent the object on the slingshot flying. The more the rubber band is stretched, the more elastic potential energy it posses. This leads to more elastic potential energy being converted to kinetic energy and thus the object will fly a further distance

# data[].attributes.body
1: Turn the propeller
2: Let go of the plane
3: Watch it fly
The chemical potential energy from me is converted to elastic potential energy as I turn the propeller around, then when I let go of it, it converts elastic potential energy to kinetic energy as the plane flies through the air.
https://goo.gl/images/gCjnx2

# data[].attributes.body
A toy car
Concept:energy conversion
Steps:
1.Put the toy car on a smooth surface.
2.Push the car forward.
3.Watch it move!
Explanation:
When you push the toy car, the chemical potential energy from your hand is converted to kinetic energy.It is converted to the kinetic energy of the toy car and the toy car will move.But the toy car will eventually stop as all the kinetic energy is converted to heat and sound energy.

# data[].attributes.body
A SLINGSHOT
Concept: Energy conversion
Steps:
1. Pull the slingshot back
2. Place an object in the compartment at the end of the slingshot
3. Release the slingshot
Explaination
When the slingshot is pulled back, the rubber band gets stretched. The rubber band then possess elastic potential energy. When you release the slingshot, the elastic potential energy is converted to kinetic energy which propels the object. To get the object to go a further distance, you can pull back the slingshot more. More elastic potential energy converts to more kinetic energy and the object will go a further distance

# data[].attributes.body
Concept : Energy Conversation Elastic potential energy →kinetic energy of the cup →kinetic energy of the ball + gravitational potential energy + sound energy
1.ut the ball into the cup.
2.Pull the cup backwards.
3.Release the cup and shot the ball into the cup.
4.And try again.
Explanation
The rubber band is connected to the cup and stores elastic potential energy. As we put the ball into the cup, we pull the cup backwards and the rubber band will have more elastic potential energy. When we release the cup, the elastic potential energy from the rubber band is converted to kinetic energy and pushes the ball in the cup into the air and into the cup.

# data[].attributes.body
Concept:energy conversion
1.Pull the bus backwards
2.release the bus
3.watch the bus go
Explanation:
The spring inside the bus will be stretched and have elastic potential energy. The elastic potential energy will be converted to kinetic energy. The kinetic energy will propel the wheels of the bus,causing the bus to move forward. The bus will stop as the elastic potential energy decreases and there is lesser elastic potential energy to be converted to lesser kinetic energy . The elastic potential energy will be used up to be converted to heat energy as there is friction between the wheels of the bus and the surface of the ground and the elastic potential energy will be converted to sound energy too,the kinetic energy will be used up,so the bus will come to a complete stop.

# data[].attributes.body
Concept:Energy Conversion.
Steps:
1) Put your fingers on the car and pull it back while it is still on the floor.
2) Release it and watch it move.
Explanation:
When I use my fingers to move the car back words, there is Kinetic Energy between my fingers and the car with Potential Energy. The spring with Elastic Potential Energy attached to the metal rod connecting the wheels at the back will twist back words. After I release it, the spring will twist forwards and causes the car to move and it will eventually stop as friction which is Heat Energy is caused  between the floor and car. The car will also have Kinetic Energy when it is moving and also Sound Energy.

# data[].attributes.body
Concept:Energy conversion
Steps:
1.Insert batteries
2. Fill in the bullets
3. Take aim
4. Pull the trigger for the bullets to shoot
Explanation:
When there are batteries in the gun, there is chemical potential energy possessed.When the trigger is pulled,chemical potentialenergy possessed in the gun will be converted into sound energy and kinetic energy. When the bullets are shot, the chemical potential energy that is stored in the bullets will be converted into kinetic energy and gravitational potential energy. Eventually, the amount of gravitational potential energy and kinetic energy decreases and there will not be any energy stored in the bullet. Hence, the bullet drops on the floor.When the trigger was pulled, chemical potential energy is converted into elastic potential energy to shoot the bullet out.

# data[].attributes.body
Concept: Energy conversion ,Light and Electrical Circuit.
Steps:
1.Charge it
2.On the power of the PSP
3.Play.
Explanation
The electric circuit in the device allows electrical energy to flow through.The electrical energy is then converted into light energy to display items on the screen.
The light from the surroundings travel to the display screen and reflects back into our eyes which allows us to see whats being displayed.
sub 2 pewdiepie
T-suk rate if u agree

# data[].attributes.body
Concept: Energy Conversion
Steps:
1.Place the toy on the floor.
2.Push the toy bus.
Explaination:
When I push the toy bus, chemical potential energy stored in my hand will be converted into kinetic energy. The kinetic energy in my hand will be transferred into the toy bus and the toy bus will move. The toy bus will eventually stop because some kinetic energy will be converted into heat and sound energy.

# data[].attributes.body
Concept: Energy Conversion
Steps:
1. Turn the knob of the toy a few times
2. Place the toy on the floor and watch it move around! Cute!
Explain:
When I turn the knob, the chemical potential energy stored in my fingers converts to kinetic energy of my fingers
It is converted to kinetic energy of the knob and is converted to elastic potential energy of the spring attached to the knob. When I released the toy on the floor, the potential energy stored in the wound-up spring is converted to kinetic energy and heat energy (due to frictional force) and sound energy of the moving toy. The toy eventually stops as ALL kinetic energy has been converted to heat and sound energy.