# data[].attributes.body
Put up a video of your greeting card (front and back). Make sure we can see the design of the card and the circuit. Have fun!

(Write down the names of the designers.)

# data[].attributes.body
The ice gain heat and melted.

# data[].attributes.wish_content.attachment_props.alternative_text
condensation happening on a bottle of water

# data[].attributes.body
Ice melting

# data[].attributes.body
Both bulbs are bright even though they are arranged differently.

# data[].attributes.body
Water is gaining heat as it is boiling.

# data[].attributes.attachment_caption
Set-Up A on the left, Set-Up B on the right.

# data[].attributes.body
Set-Up A is dimmer than Set-Up B. The Arrangement of the bulbs are changed.

# data[].attributes.body
After a few hours, I found out that the water had frozen. It froze because the freezing point of water was 0°C and the temperature inside of the freezer was very near that temperature.

# data[].attributes.body
the warmer water vapour from the air comes in contact with the cooler surface of the bottle, loses heat to it and condenses in to water droplets.

# data[].attributes.body
I put water in a cup and put it in a freezer.

# data[].attributes.body
The ice is melting because it Gained heat

# data[].attributes.body
Task 3

https://www.youtube.com/watch?v=xFRu2mt6SgQ

This video of a glass of water freezing

# data[].attributes.attachment_link.title
Time Lapse Test - Freezing A Glass of Water

# data[].attributes.body
Ice is gaining heat from the surrounding air and melting

# data[].attributes.body
The bulb below is dimmer than the bulb above.The curcuit above has more wires than the curcuit above.

# data[].attributes.body
Task 3

# data[].attributes.attachment_caption
I changed the positioning of the bulbs and wires

# data[].attributes.body
water gains heat and evaporates into water vapour. The warmer water vapour touches the cooler surface of the surrounding air, loses heat to it and condenses into water droplets. The water droplets form clouds.

# data[].attributes.body
The ice gains heat and melts into water

# data[].attributes.body
The water starts boiling at 100 degree celcius and gains heat. It changes from the liquid state to the gaseous state

# data[].attributes.body
The ice is gaining heat as it is melting

# data[].attributes.body
The one on the right is brighter than the one on the left. The arrangement of the bulb and the battery have changed.

# data[].attributes.body
the warmer water vapour from the surroundings comes in contact with the cooler surface of the sprite bottle loses heat to it and condenses in to water droplets.

# data[].attributes.body
the bulb one the right is dimmer than the bulb on the left. The arangements of bulb and wires have changed.

# data[].attributes.body
this my plant. i was away for a while so it withered as it had no water.

# data[].attributes.body
The bulb on the left is dimmer than the bulb on the right. The arrangement of the batteries and the bulbs have changed.

# data[].attributes.body
Electricity Thingy >:)

# data[].attributes.headline
The “white cloud” seen above a boiling kettle.

# data[].attributes.subject
The “white cloud” seen above a boiling kettle.

# data[].attributes.body
The so-called “white cloud” is actually the water vapour that has condensed, which is water droplets. The “white cloud” we see is made out of water droplets.

How do the water droplets appear: When the kettle boils, the water gains heat and when the water reaches boiling point, it changes from water to water vapour. Then, the warmer water vapour in the air touches the cooler surface of the surrounding air, loses heat to it and condense into water droplets. The water droplets are the white cloud we see.

# data[].attributes.body
The arrangement of light bulbs have changed.

# data[].attributes.body
This is my electric circuit. For the first electric circuit, the light that the bulb gives out is dimmer than the second circuit. The second circuit was bright. ~Yi Shan

# data[].attributes.headline
Task 4: Individual Work (Fun with Electricity) (4 Jun)

# data[].attributes.subject
Task 4: Individual Work (Fun with Electricity) (4 Jun)

# data[].attributes.body
1. Using Nearpod, take a picture of the 2 circuits to show how how the brightness of the bulbs differ. (Your assignment on Nearpod is for 2 batteries and 2 bulbs.)

2. Write down what you have changed.

+++++++++++++++++++

Example:

The bulbs on the left is dimmer than the bulbs on the right. The arrangement of the bulbs have changed.

# data[].attributes.body
Changes of State (for any substance)

1. Take a picture/video of an example of a change of state of water. Give an explanation for observation. (You can also use pictures/videos on the internet.)

2. Critique your peer's work. (The index number that comes after yours. If the explanation is correct, you can write 'Good job! I agree with you'. If you do not agree with him/her, write down your explanation for the phenomenon. )

+++++++++++++++

The woman breathes out air that contains water vapour.

The warmer water vapour touches the cooler surface of the surrounding air, loses heat to it and condenses into water droplets. The tiny water droplets form the mist.

# data[].attributes.body
Chen Rui, Brandon, Avyn, Eddie, Joshua, Aakif

# data[].attributes.headline
Rui Qian, Falisha, Chen Jye, Ellysha and Yi Shan

# data[].attributes.subject
Rui Qian, Falisha, Chen Jye, Ellysha and Yi Shan

# data[].attributes.headline
Rui Qian, Falisha,Chen Jye, Ellysha and Yi Shan

# data[].attributes.subject
Rui Qian, Falisha,Chen Jye, Ellysha and Yi Shan

# data[].attributes.body
Chen Rui, Avyn, Brandon, Eddie, Joshua,Aakif

# data[].attributes.body
This is the early blight on a tomato and the cause of it is fungal spores, wet weather, infected plant debris and overhead watering.

There are some treatments to it such as removing infected leaves, water at the base, use mulch and spray with homemade solution: a simple mix of 1 tablespoon of baking soda, 1 tablespoon of vegetable oil and 1 gallon of can be sprayed on the leaves to prevent fungal growth.

# data[].attributes.attachment_caption
1.The plant withered to lack of water.2. If a plant doesn't get enough water, its cells lose turgidity (the pressure that keeps them rigid), causing the plant to droop and wither. However, overwatering can have a similar effect, causing root rot and reducing the plant's ability to take up water.We can place a tub of water under the plant and after a few hours it will come back to normal.

# data[].attributes.attachment_caption
This is a rose.It is withered.I think it is withered because of lack of water.

# data[].attributes.body
Possible treatments for the rose.Water it from the bottom. Cut off dried branches and blooms. Remove yellow and dry leaves.

# data[].attributes.attachment_caption
This is a whitered plant its looks like it hasnt been watered in many days which didnt allow it to make food.

# data[].attributes.body
These are pictures of withered plants. I think that these plants withered because the weather is so hot and there is a lack of water. I think that these plants can be saved by giving it sufficient water.

# data[].attributes.body
I think the cause of the of the plant withering is the lack of food

# data[].attributes.body
I think that the plant wilted due to the temperature surrounding it is too cold. To cure it, you will have to put it in a more sunny place. Pls let me know if i made any mistakes.

# data[].attributes.attachment_caption
The plant withered as there is no water.You can put the plant in a pool of water.

# data[].attributes.attachment_caption
I think the plant withered because of lack of either water or sunlight.I think to make the plant bloom again is to give it more water or put it outside in the sunlight.

# data[].attributes.attachment_caption
This plant looks like this because it had lack a good amount of water to treat this plant you must make sure its moist and damp everyday dont water it too much though

# data[].attributes.body
This plant wiltedbecause is is over watered or not getting enough sunlight to treat the plant, you need to water and give the plant sufficient light

# data[].attributes.attachment_caption
I think this plant withered due to the lack of water. We should give it water till it reaches the roots. If the soil is very dry, water it in intervals, allowing it to absorb moisture.

# data[].attributes.body
I think one way to make this plant bloom again is to give it more water.

# data[].attributes.attachment_caption
Cause: water stress or overwatering, nutrients deficiency and more can cause this plant to wilt  Treatment: cut of yellow leaves so that the plant wont use its energy on the dead leaves. Secondly, you can ensure that the soil has good draining to prevent over watering. Lastly, you can try giving it lesser/more sunlight or add fertiliser. As a last resort, you can check for pest.

# data[].attributes.body
Diseased plant

# data[].attributes.body
It has insuffiecnt water

# data[].attributes.body
No water!

# data[].attributes.attachment_caption
it needs water and mineral salts to survive.

# data[].attributes.body
Give it more water and sunlight

# data[].attributes.attachment_caption
I think the plant become wilted as there are pests and they destroyed the food carying tubes in the plant

# data[].attributes.body
Task 2

# data[].attributes.body
This is a witherered plant i think it is a rose plant it looks like it hasnt been watered for a very long time

# data[].attributes.body
It has insufficient water causing it to wither.

# data[].attributes.body
Might be lack of sufficient water or fungi infection.

To treat it they should add more water or treat the fungi infection

# data[].attributes.body
The task below is task two.

# data[].attributes.attachment_caption
Task2.this flower has wilted.I suggest the owner/gardener waters it as it looks dry.

# data[].attributes.body
I think this plant withered from lack of water. In order to revive the plant, we could place the plant in a shaded spot, then, water it more.

# data[].attributes.body
This is a withered plant

# data[].attributes.body
This is a wilted plant. It is wilted because it did not receive sufficient water. To help it, you need to water it everyday with the amount of water it needs.

# data[].attributes.body
My other pot of green bean:)

# data[].attributes.body
My green bean plant