# data[].attributes.body
Today is the first day of semester 2 and the first thing I did was to create a padlet and post it to the semester projects.

# data[].attributes.body
I chose a book that I thought would be a good fit to use for my project, however it was too thick so I had to rip out some pages out of the book which took the whole class to do.

# data[].attributes.body
I continued to rip out some pages so the book would have the perfect amount of pages to work with, and after I ripped out a good amount I started gluing two and two pages together and four and four.

# data[].attributes.body
During the whole class I glued pages together and by the end of the class I was about halfway done with the gluing part.

# data[].attributes.body
During the whole class I was only working on improving a few pages that I had in my notebook

# data[].attributes.body
After about half an hour into the class I finished gluing all of the pages together so I could start working on the book, but I had to let the glue dry so the pages would stick together, so I looked for design inspirations for my project that I could possibly use.

# data[].attributes.body
In this class time I started off by going on Pinterest to look for a few design ideas however I ken I couldn't do that all class so I thought a little before I decided to start working on the cover of the book, so I looked through a bunch of magazines and cut out the pictures I wanted to use or save for later.

# data[].attributes.body
In class I continued to look through magazines to see what pictures I might like however I found none so I decided to start looking for a binder and I found a pretty green paper with some patterns. I also found a sheet of paper with some small squares on them that were pretty that I will use for the edges of the book. At the end of the class I looked through a book that had beautiful pages of drawings and more which I will use.

# data[].attributes.body
In this class I strated by looking for newspapers to rip pages out and glue it on the cover of my book however I decided instead of using the newspaper I would use the pages I kept when I ripped them out of the book, so I started ripping sections of papers with text and then i started to glue them on the cover of the book.

# data[].attributes.body
In this class I finished gluing ripped pages onto the front cover so i started doing the back as well but I didn't have any time left. I also found some papers that I am going to use at the front cover.

# data[].attributes.body
Today I cut out stripes of paper from pretty paper to make it onto a cover for my scrapbook, then I started gluing them on.

# data[].attributes.body
In this class I finished the front and the back cover of the book earlier in the class so I started the process of putting glue on the cover for it to be protected.

# data[].attributes.body
During class I spent my time applying another layer of glue on the front and back cover of the book to make it look better and then I let it dry at the end of class.

# data[].attributes.body
In this class I put on the green binder on the book but it didn't stick too well so I got some glue and glued it to the book and then I put another layer of glue on both of the sides of the book covers including the binder.

# data[].attributes.body
In this class today there was not much time to work since the day was shorter so I only had time to work on the 'Test For Feedback' in my notebook.

# data[].attributes.body
Today I worked on cutting out a picture of a window as accurately as possible

# data[].attributes.body
In class today I glued the cut out picture of a window to a page in the book then I cut out a part of that page so you could "See through" the page by looking through the window, then I started by painting a paper black and let it dry for next class.

# data[].attributes.body
Today in class I continued painting on the black paper from the last class but today I used a method which i used white paint with which made it look like stars. Then I started on another page by gluing a picture on it and starting to paint around it.

# data[].attributes.body
In class today I painted over the picture I glued in however it didn't appeal to me so I painted a whole page black then I got some red paint and used the same method as when I made the stars.

# data[].attributes.body
In the whole class today I was busy painting a paper that can open and close to make interacticve art and cutting out papers and drawing to make some interactive art called waterfall cards.

# data[].attributes.body
In class today I finished making and gluing the waterfall cards into my scrapbook which took the wole class because I messed up a few times.

# data[].attributes.body
In class today Ms. Cindy taught me how to make something for my scrap book, and later on after that I started by making a flower for a new page which will consist of more flowers.

# data[].attributes.body
Today I finished the rest of the flowers and glued them together to then glue them onto a page in the scrap book so that when I opened it it would pop out however it was difficult and it did not turn out exactly how I tried to make it turn out.

# data[].attributes.body
In class today we did not have much time since it was a half day, but I started drawing something in my scrap book.

# data[].attributes.body
In class today I decided to make more waterfall cards so I cut out all of the necessary pieces and I started sketching a few things, but I did not finish.

# data[].attributes.body
In class today I mostly finished the waterfall cards I started on yesterday.

# data[].attributes.body
In class today I finished a sketch in my scrap book and then I drew with ink over it so it would be more visible

# data[].attributes.body
In class today I finished gluing on my second deck of waterfall cards in my scrapbook, and then I worked on an interactive door that I put on the same page as the waterfall cards.

# data[].attributes.body
In this class I started by working on an unfinished page by gluing a pop up drawing in it and then I worked on an interactive art called Victorian purse puzzle by gluing some decorations onto it.

# data[].attributes.body
In class today I continued working on my interactive Victorian purse puzzle by gluing more things into it and designing what I want it to look like.

# data[].attributes.body
In class today I finished my Victorian purse puzzle and I started on a new page and glued some things in before the class was over.

# data[].attributes.body
In class today I continued working on the unfinished page where I glued in pictures that I slightly started working on last class.

# data[].attributes.body
I started to make another Victorian purse puzzle and glued scraps of things I had used before into it.

# data[].attributes.body
In class today I finished the Victorian purse I had been working on for three classes, and I glued two parts of my old project in there as well.