# data[].attributes.body
1. New filter cartridge

2. Filter wrench

3. Bucket or towel

4. Screwdriver or plier

# data[].attributes.body
Changing a water filter can be a daunting task if you have never done it before but if you follow all the necessary steps precisely the process will be smooth and you will achieve a good end result of a working water filter.

Thesis statement: The steps to change a water filter under the sink are preparation and safety, removing the old filter and installing a new filter.

# data[].attributes.body
Topic sentence - Preparation and safety procedure are the fundamental step to a safe and successful way to change the water filter.

First and foremost, prepare all the supplies: bucket ,towel. water filter wrench , dish soap, pliers , drain hose , TDS meter. Ensure that the new filter is compatible to the system

Next ,Cut off the water supply at the main valve in order to avoid potential flooding due to the water pressure in the system .Lastly ,Relieve Pressure by opening the nearest faucet, as it make the filter removal easier and avoid potential damage to electrical component near the system

# data[].attributes.body
Removing the old filter is an essential step before actual proceeding to replace the filter. Firstly, use a filter wrench, plier or your hands to unscrew and remove the filter carefully. Then, remove the old filter cartridge from the housing. After removing the cartridge, inspect and clean the filter housing with a damp cloth or warm soapy water before rinsing and drying it thoroughly. Make sure to check the O-ring for damage, clean its track, and replace or lubricate it with silicone grease if needed to prevent leakage.

# data[].attributes.body
1. Preparation and Safety

Ensure your new filter is compatible with your system

Shut the water supply off at the main valve

Release water pressure by opening faucets

2. Removing Old Filter

Use a filter wrench or your hands to unscrew and remove the filter carefully

Remove the old filter cartridge from the housing

Inspect and clean the filter housing with a damp cloth or warm soapy water; rinse and dry thoroughly

Check the O-ring for damage, clean its track, and replace or lubricate it with silicone grease if needed to prevent leaks

3. Installing New Filter

Insert the new filter cartridge into the housing

Screw the housing back onto the filter bracket by hand, but avoid overtightening to prevent damage

Slowly turn the water supply back on to avoid pressure surges and check for leaks around the housing

Run water through the system for several minutes to prime the new filter and flush out any air or impurities

Close faucets once water flow and pressure return to normal

# data[].attributes.body
Lastly, let’s get to actually installing the new filter. Place it into the housing, then screw the housing back onto the filter bracket by hand for more control. However, take caution to avoid overtightening as this can damage the system. After that, turn the supply back on gradually to avoid splurges and survey for leaks. Allow this flow to naturally flush out impurities and close the faucet once a satisfactory level of pressure and cleanliness has been attained.

# data[].attributes.body
Your water filter has now been succesfully updated, and you have the necessary knwoledge to carry out this process with ease whenever you find it faulty. Remember, the 3 key steps are to prepare your materials and workspace, extract the old filter, and replace it with the new one. Always maintain safety and precision to prevent injury and further complications.

# data[].attributes.body
Changing a water filter can be a daunting task if you have never done it before but if you follow all the necessary steps precisely the process will be smooth and you will achieve a good end result of a working water filter. The steps to change a water filter under the sink are preparation and safety, removing the old filter and installing a new filter.

Preparation and safety procedure are the fundamental step to a safe and successful way to change the water filter.

First and foremost, prepare all the supplies: bucket ,towel. water filter wrench , dish soap, pliers , drain hose , TDS meter. Ensure that the new filter is compatible to the system

Next ,Cut off the water supply at the main valve in order to avoid potential flooding due to the water pressure in the system .Lastly ,Relieve Pressure by opening the nearest faucet, as it make the filter removal easier and avoid potential damage to electrical component near the system

Removing the old filter is an essential step before actual proceeding to replace the filter. Firstly, use a filter wrench, plier or your hands to unscrew and remove the filter carefully. Then, remove the old filter cartridge from the housing. After removing the cartridge, inspect and clean the filter housing with a damp cloth or warm soapy water before rinsing and drying it thoroughly. Make sure to check the O-ring for damage, clean its track, and replace or lubricate it with silicone grease if needed to prevent leakage.

Lastly, let’s get to actually installing the new filter. Place it into the housing, then screw the housing back onto the filter bracket by hand for more control. However, take caution to avoid overtightening as this can damage the system. After that, turn the supply back on gradually to avoid splurges and survey for leaks. Allow this flow to naturally flush out impurities and close the faucet once a satisfactory level of pressure and cleanliness has been attained.

Your water filter has now been succesfully updated, and you have the necessary knwoledge to carry out this process with ease whenever you find it faulty. Remember, the 3 key steps are to prepare your materials and workspace, extract the old filter, and replace it with the new one. Always maintain safety and precision to prevent injury and further complications.

# data[].attributes.body
SAI AMRITHA SINDHU

ABIGAL BLESSING FERNANDEZ

NAY CHI

KYSHA MANIAM

NIVEISHAH SELLAMUTHU