# data[].attributes.body
The diagram presents the process in several steps to produce plastic products from oil refinery to storage in warehouse.

Overall, each stage is grouped by sub-stages that provides a linear order in using the raw material, injection moulder and packing, respectively organized. In this way, having a final product in storage that will be useful for companies to fabricate products for final customers.

In the first stage are 4 sub-stages that begins with the oil refinery, then, it is transformed in a plastic liquid before pass by raw material, high pressure oven, plastic granules. To continue the next stage, the plastic liquid is addressed to a different substage that consist an injection moulder in order to generate the releases product and throwing off waste product.

Finally, the quality area takes this final stage that briefly consists in 2 substages, packaging the plastic products and then storage in the warehouse to distribute for companies

# data[].attributes.body
The graph illustrates the production of plastic material by transforming the raw material into it following a specific process.Overall,this process implies a complex production because of the important machines that are given to treat the raw materials which are transported in a truck to then go through a processes that will change their physical and molecular state.

Following the structure of the production is relevant that the raw materials go inside of the oven which has a high pressure and then change it state from solid to liquid.Moreover,the machine that is in charge of the long molecules of plastic releases plastic granules that the will be put into a injection moulder that will melt the plastic for then to mould it.

Finally when the mould is done,it will be packed by workers and then is carried in another truck to be delivered to the warehouse, on the other hand,the waste of plastic that goes along with the production is organized in trash cans.

# data[].attributes.body
The diagram explains how raw materials are used to make plastic products. The complete process is a linear process and is compound by seven stages. The process stars with the preparation of the raw material and is concluded with the plastic ready to storage.

According with the graph in the fist step the raw material is prepared for been introduced in the high pressure oven, consequently it will obtain long molecules of plastic; one this is finished is obtained plastic granules, which are put in an injection moulder melts plastic and this is collocated and forced into a mould.
Under these circumstances, the product is removed from the moulds, it is sent to quality controller. To come to the end the process, the final product is packed in separate boxes and is made ready for been storaged in warehouse.

# data[].attributes.body
The diagram provides information about the process in the production of plastic products.

Overall, there are various stages from the raw material to a high level product that will be packing and storage in a warehouse. It’s clear that it is a complex process that requires a large number of steps and a professional team to make it in the right way.

At first the raw material is obtained from an oil refinery, then this material passes through a long molecule of plastic, then the plastic granules go to a high pressure oven in order to get an injection of mould that melts plastic and forces it into mould. Once the mould releases the product in a rectangular form is checked by a professional team that makes sure the mould was executed the best way according to the standards of the company.

Finally, a quality controller examine the process and reaffirm that there's no errors in the products, after that an expert in packing finish the process by putting the product in big boxes and storeging in a warehouse waiting for the moment to be used.

# data[].attributes.body
The diagrams illustrate how the raw material are used to make different kinds of plastic products, for different industries.

Overall, the entire raw material is come from the refinery oil to deposit tanks in the store where it is full, the transport band move the material to the high-pressure oven where it is converted to molecules of plastic thankfully the temper and the pressure that they used, the final product is the plastic granules.

In the next stage is very important because the material must be ready to pass for the injection molded melts plastic and depend on the final product the operator would select the design that they want to produce and the end.

Finally, when the molds are reviewed by the quality controller and pass to the packing area to were moved to the storage in warehouse.

On the other hand, we have to remember that the waste products are used again in the entire process that let earn money, material and reduce the material that produce damage for the environment.

# data[].attributes.body
The present diagram shows the process of making plastic products from raw materials. Overall, raw materials experience a three-phase process in order to create plastic, give it a form, and store the final product.

Thus, in the first phase, through a chemical process, raw materials are treated in a high-pressure oven that creates plastic molecules, in other words, raw plastic.

Then, the raw plastic will be introduced in a machine that will melt the plastic to mould it and give it his final form.

Finally, the final product will pass a quality control procedure in order to be packed and store in a warehouse.

# data[].attributes.body
The chart describes the process of the plastic transformation since the recollection of the raw material until the storage of the final product is made.

Overall, the stages are four (high pressure alteration, mouldering of this result, packing and storage) all the process is developed with high technology which evolved complex mechanisms and a huge human capital.

To begin with, the raw material is transported from oil refinery, then this commodity is transformed with a high pressure oven which leaved long molecules of plastic, those can see it as plastic granules.

After, the new composed is passed to a machine which melted the plastic according to a mould, with the mould shape is produced a new object, this new product is analyzed by a quality controller who will decide if the product is ready to pack or if this element must be deleted, if the product accomplished with the quality parameters, the storage is the final step.

# data[].attributes.body
The graphic illustrates the phases in the manufacture on how raw material are used to make plastic products.

Overall, the raw material come from an oil refinery then in the factory starts the process, in a first phase the raw material is put into a container in witch material travels to a high pressure oven, where a high temperature, and high pressure turn the raw material into a long molecules of plastic.

The long molecules of plastic are saved on another container, then the molecules have to pass through a machine witch melt the plastic and forces it into a mould, the result of this are the mould releases product and some extra waste, that can be use again as a raw material.

The plastic mould is transported on a band where some quality controllers check the mould resultant, then the product is packing and its get into a storage warehouse.

# data[].attributes.body
The chart shows the process to produce plastic products from raw materials. The illustration shows five main phases from the transport of materials required to the packing and storage of the final products.

Overall, the process occurs in five main stages: the transport of the raw material into the factory, the transformation of the material into plastic molecules, the injection to force the material into the shape of the desired product, the package of it and finally, the storage into a warehouse before being transport to the final client. The complex process required important human and physical resources.

The first stage is shown as a heavy load vehicle transport the raw materials required to the plastic factory. After that, the second phase is the process of combustion that occurs in the high-pressure oven in which the irregular raw materials become long plastic uniforms molecules, to be add to the most important part of the process: the injection.

The third phase the plastic granules transform into the desired product in the injection machine, because of the heat and pressure that the machines provide it. After that, in the fourth phase the workers take the final product and check its quality after packed into boxes, while the waste product is managed into a recycle program. Finally, the fifth stage the employee storage the boxes before they are sent to the final user.

# data[].attributes.body
The graphic shows the process of how raw materials are used to make plastic products. Overall, it is a process of 6 stages where the raw material is passed through a mechanical process but also is intervened by human hands.

The first part of the process is how raw material is changed plastica granules. This starts when the raw materials are brought from the oil refinery and are passed through a high pressure oven where the long molecules of plastic are stracted and become in plastic granules.

The plastic granules are put in a machine that melts them and injects them in de moulds, after this, the product is released from the mould by human hand and the waste of product is placed on big cans.

Finally, after releasing the material from the mold, it is passed to the stage of quality control and after being approved by quality people, the material passes through a manual packaging area and is stored in the warehouse.

# data[].attributes.body
The picture illustrates the process of making plastic products by using raw materials. Overall, there are five main stages. The first one is the oil that is taken from refinery, the second one is about the creation of plastic granules, the third one consist on melting the plastic and molding it, in the fourth stage the plastic is examined, and finally it is packed and stored.

To begin with, a truck that contains oil from the refinery is taken to the fabric in order to be mixed with the raw material that is inside a container. After that, this mix goes throughout a high pressure oven as they, in the next stage, need to generate long molecules of plastic. Then, at this part of the process the substance is converted in plastic granules ready pass into the injection moulder. The third stage starts when the plastic is melted, and then it is forced into a mould.

In the fourth step, the mould is taken to the quality controller to check out if there is any inconvenient with the product. If they found out that the material is in good conditions, they will start with the last process where they pack and store the plastic product in a warehouse.

# data[].attributes.body
The diagram illustrates which is the process to transform raw materials into plastic products. Overall, there is many features involved this procedure can be divided in three main stages: the transformation of raw materials to plastic granules, then the plastic granules covert into a model plastic product and the final check quality for storage the product.

In the first stage, the raw material that came from an oil refinery is stored and pass throughout a high-pressure oven to obtain long molecules of plastic. However, this material needs to fulfill the injection moulder step to become in a plastic product. Here is where the long molecules of plastic are melted to force it into a mould.

After that stage, the process involves human resource where it goes through a quality controller in a band to define if there is viable product and can be packaged or must be wasted. Finally, the plastic product is taking and storage in a warehouse.

# data[].attributes.body
The graph illustrates information on how raw materials are used to manufacture plastic containers. Overall, it can be seen that five stages are used to get the final product.

To begin, oil is transported from the factory and then is mixed with raw material for some time. After that, it is moved to a high pressure oven where it is kept for a short time.  Following this stage and after being pressed appropriately this material is taken to the third container where it is combined with long molecules of plastic. The four step involves taking the plastic granules to the injection moulder   where it is melt and it is forced into a different mould. Next, this mould is taken by a supervisor controller that verifies its quality and resistance. Finally, the product is taken and packed and then put inside a warehouse to be distributed to a lot of different places around the city