# data[].attributes.headline
Why we choose to use Solar for the industrial?

# data[].attributes.subject
Why we choose to use Solar for the industrial?

# data[].attributes.body
Utility-scale solar has been generating reliable, clean electricity with a stable fuel price for decades. Solar power plants can be developed in a way that balances environmental protection with our energy demands and climate goals.At the same time solar power generation is reducing carbon emissions.

# data[].attributes.body
The principle of tidal power generation is similar to that of ordinary hydropower. Through the outflow reservoir, seawater is stored in the reservoir at high tide and stored in the form of potential energy. Then, the seawater is released at low tide, and the difference between high and low tide is used to drive the turbine to rotate , Drive the generator to generate electricity.

# data[].attributes.body
Solar panel convert sunlight into electric current that can be used by the public. Additionally, sunlight is converted to direct current and soon converted further into alternating current

# data[].attributes.body
Biogas is mainly composed of CH4 and CO2. The combustion of CH4 will not produce harmful substances such as SO2 and NOx, so it is considered as a clean energy source. CH4 and CO2 are the main harmful substances that affect the greenhouse effect of the atmosphere. The warming potential value of equal mass CH4 is 21 times that of CO2. Therefore, in the application of biogas engineering should be resolutely not allowed to appear the phenomenon of "biogas emptying".
In recent years, many scholars have devoted themselves to the research of non-heating sterilization methods, and have made some progress. Common methods mainly include ultraviolet ray, chlorine gas, ozone and electric pulse method. Europe and the United States developed countries because there are strict limits on air quality, to reduce the biogas slurry storage process gases and vapors impact on air quality, the biogas engineering general design of liquid storage device for semi-closed store tank, and the majority of storage tank construction directly from the farm, from the eduction in fermentation tank of biogas slurry is transported through sealed tank to store tank, biogas slurry one aspect can be easy to use, on the other hand, treatment of biogas slurry dispersion, avoid the enrichment of a high concentration of harmful gas in one place.

# data[].attributes.headline
A nuclear reactor produces electricity in much the same way other power plants do. The chain reaction produces the energy, which turns water into steam. The pressure of the steam turns a generator, which produces electricity.

# data[].attributes.subject
A nuclear reactor produces electricity in much the same way other power plants do. The chain reaction produces the energy, which turns water into steam. The pressure of the steam turns a generator, which produces electricity.

# data[].attributes.body
In a nuclear energy plant, heat is produced from splitting atoms – a process called nuclear fission.

# data[].attributes.body
China is the world leader in wind power generation, with the largest installed capacity of any nation and continued rapid growth in new wind facilities. it is estimated China has about 2,380 gigawatts (GW) of exploitable capacity on land and 200GW on the sea. Wind power remained China’s third-largest source of electricity at the end of 2020, accounting for 12.8% of total power generation capacity.

# data[].attributes.body
Wave energy is the energy transferred by wave motion on the surface of the ocean. It can be used as an energy source for different purposes, such as power generation, desalination, or pumping. Ocean waves are converted from solar sources, because the uneven heating of solar radiation and the cooling of the earth's crust and the rotation of the earth create wind, and the wind blows across the sea to form waves. The energy generated by the waves is proportional to the wind speed.

# data[].attributes.body
Tidal energy is a renewable energy that is clean, does not pollute the environment, and does not affect the ecological balance. The tide rises and falls every day, repeats itself again and again, inexhaustible and inexhaustible.

# data[].attributes.body
Tidal range and water head often change within a day, and without special adjustment measures, the output is intermittent, which brings inconvenience to users. However, the operation plan can be made in advance according to the tide forecast, and it can be connected to the large power grid to overcome its intermittency.

# data[].attributes.body
also called hydroelectric power or hydroelectricity, is a form of energy that harnesses the power of water in motion

# data[].attributes.body
Geothermal energy, form of energy conversion in which heat energy from within Earth is captured and harnessed for cooking, bathing, space heating, electrical power generation, and other uses.

Heat from Earth’s interior generates surface phenomena such as lava flows, geysers, fumaroles, hot springs, and mud pots. The heat is produced mainly by the radioactive decay of potassium, thorium, and uranium in Earth’s crust and mantle and also by friction generated along the margins of continental plates. The subsequent annual low-grade heat flow to the surface averages between 50 and 70 milliwatts (mW) per square metre worldwide. In contrast, incoming solar radiationstriking Earth’s surface provides 342 watts per square metre annually (see solar energy). Geothermal heat energy can be recovered and exploited for human use, and it is available anywhere on Earth’s surface. The estimated energy that can be recovered and utilized on the surface is 4.5 × 10⁶ exajoules, or about 1.4 × 10⁶ terawatt-years, which equates to roughly three times the world’s annual consumption of all types of energy.

The amount of usable energy from geothermal sources varies with depth and by extraction method. The increase in temperature of rocks and other materials underground averages 20–30 °C (36–54 °F) per kilometre (0.6 mile) depth worldwide in the upper part of the lithosphere, and this rate of increase is much higher in most of Earth’s known geothermal areas. Normally, heat extraction requires a fluid (or steam) to bring the energy to the surface. Locating and developing geothermal resources can be challenging. This is especially true for the high-temperature resources needed for generating electricity. Such resources are typically limited to parts of the world characterized by recent volcanic activity or located along plate boundaries or within crustal hot spots. Even though there is a continuous source of heat within Earth, the extraction rate of the heated fluids and steam can exceed the replenishment rate, and, thus, use of the resource must be managed sustainably.

Geothermal resources can be exhausted if the rate of heat extraction exceeds the rate of natural heat recharge. Normally, geothermal resources can be used for 20 to 30 years; however, the energy output may decrease with time, making continued development uneconomical. On the other hand, geothermal electric power has been produced continually from the Larderello geothermal field since the early 1900s and at the Geysers since 1960. Although there has been a decline in both of those fields, this problem has been partially overcome by drilling new wells and by recharging the water supply. At the Geysers, electrical capacity declined from 1,800 MW to approximately 1,000 MW, but about 200 MW of capacity was returned by placing the field under one operator and constructing pipelines to deliver wastewater for recharging the reservoir. Projects such as the Reykjavík district heating system have been operating since the 1930s with little change in the output, and the Oregon Institute of Technology geothermal heating system has been operating since the 1950s with no change in production. Thus, with proper management, geothermal resources can be sustainable for many years, and they can even recover if use is suspended for a period of time.

# data[].attributes.body
Dam construction requires huge land, leading to severe deforestation.

# data[].attributes.body
For the Xingfuyang Tidal Power Station, the average tidal range is 4.54 meters and the maximum is 7.16 meters. The annual power generation capacity of the station can reach 3.15 billion watt hours.

# data[].attributes.headline
Example: Liddell coal-fired power plant in NSW.

# data[].attributes.subject
Example: Liddell coal-fired power plant in NSW.

# data[].attributes.body
They use solar thermal to convert sunlight into electrical energy

# data[].attributes.body
In China, many industries use solar energy to heat water.
It's a solar water resort. Is a floating island designed by Italian industrial designer Michele Puzzolante. Its biggest highlight is that the entire facility uses the concept of solar photovoltaic, which is completely self-sufficient in energy and has no impact on the environment in this respect.

# data[].attributes.headline
The United States (US) has a total installed nuclear capacity of 98.2GW from 96 reactors in operation across 30 states and by 30 different power companies.The US produced 809TWh of nuclear energy in 2019 that represented more than 30% of global nuclear energy production.

# data[].attributes.subject
The United States (US) has a total installed nuclear capacity of 98.2GW from 96 reactors in operation across 30 states and by 30 different power companies.The US produced 809TWh of nuclear energy in 2019 that represented more than 30% of global nuclear energy production.

# data[].attributes.body
Geothermal power in Asia is most developed in Siberia, with plants at Makhachkala, Lake Baikal, and Kamchatka;

# data[].attributes.body
In India, Chandigarh; where the overpopulating residents are transitioning into using Solar Pannels for sustainable means. Install solar panels at zero cost in Chandigarh; apply online - Hello Tricity

In Myanmar, Bagan, where locals are using this deserted region where sun is abundant for their energy reasons. Solar power in Myanmar | Magazine Articles | WWF (worldwildlife.org)

# data[].attributes.body
Renewable energy source:

It can be harnessed in all areas of the world and is available every day. We cannot run out of solar energy, unlike some of the other sources of energy.

Reduces electricity bill:

How much you save on your bill will be dependent on the size of the solar system and your electricity or heat usage.

Diverse applications:

You can generate electricity (photovoltaics) or heat (solar thermal). Solar energy can be used to produce electricity in areas without access to the energy grid, to distil water in regions with limited clean water supplies and to power satellites in space.

Low maintenance cost:

Only need to keep them relatively clean. Most reliable solar panel manufacturers offer 20-25 years warranty.

# data[].attributes.body
High initial cost of solar system:

Includes paying for solar panels, inverter, batteries, wiring, and the installation.

Weather-dependent:

Includes paying for solar panels, inverter, batteries, wiring, and the installation.

Taking lot of spaces:

The more electricity you want to produce, the more solar panels you will need, as you want to collect as much sunlight as possible.

Associated with pollution:

Transportation and installation of solar systems have been associated with the emission of greenhouse gases. There are also some toxic materials and hazardous products used during the manufacturing process of solar photovoltaic systems.