# data[].attributes.body
Improved sketch

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: yes they resemble
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: yes
If any of your answers to the above is 'no', explain which part can be improved.
Ans: his lines are crooked

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: __Yes____________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _Yes_____________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _Yes_____________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: No______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ___The backing needs to be 3D. But overall, the drawing was quite well done.___________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
a) ResemblanceComparing the 2D shape with the isometric sketching, do they resemble?Ans: ___Yes.___________________________If your answer to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________b) Isometric linesAre the vertical edges of the display unit drawn as vertical lines?Ans: ______________Yes.________________Are the horizontal edges of the display unit drawn as 30 °  lines?Ans: ___Yes.___________________________If any of your answers to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________c) Are the base and the backing in proportion ? Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.Ans: ______No_____________________

# data[].attributes.body
Improved version

# data[].attributes.body
my 2nd draft

# data[].attributes.body
mMmmMmMmmMMmmMM

# data[].attributes.body
Hi Kanika, the horizontal edges of your isometric sketching is slightly more than 30o, especial the horizontal edge on the right side. Certain part of the thickness for the backing is missing.

# data[].attributes.body
Hi Yan Zhen, you have done a good job in the isometric sketching. However, a small part of the thickness for the backing is missing. In general, your sketching is very neat!

# data[].attributes.body
Hi Gigi, your isometric sketching is very well-drawn, except that the left vertical edge of the backing and the left edge at the back of the base is slanted.

# data[].attributes.body
Hi Angela, one of the vertical edge (on the front right) of the base is not vertical. There is no thickness of material for the base. Part of the thickness for the backing is inaccurate.

# data[].attributes.body
Hi Eunice, the left side of the base is not parallel to the right side, as such, the front of the base is shorter than the back. It seems like the length of the base is more than 6 parts of its height.

# data[].attributes.body
Hi Adwaith, part of drawing is cropped. You may want to re-post your sketching. Based on what I can see from the picture, the length of the base is shorter than 6 parts of its height. As such, the base looks out of proportion. The base of your display unit does not seem to be able to see through from the bottom. There is also no thickness of material for the backing.

# data[].attributes.body
Hi Yilan, the length of the base is much shorter than 6 parts of its height, whereas the width of the base is longer than 4 parts of its height, as such, the base looks out of proportional. Likewise, the length of the backing is shorter than 6 parts of the height of the base. In addition, the certain part of the thickness for the backing is inaccurate.

# data[].attributes.body
Hi Charlene, the base is well-drawn. However, certain part of the thickness for the backing is inaccurate.

# data[].attributes.body
Hi John, the length of the base is longer than 6 parts of its height. Similarly the width is longer than 4 parts of its height. In addition, the left side of the base is longer than the right side.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ________yes_____________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: ________cant tell____________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: you could have taken the photo better
c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______yes___________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

# data[].attributes.body
Hi Sanjit, the front of the base is longer than the back of the base and its width is about 3 parts of its height, it would look more proportional if you increase the width to 4 parts of its height. There is no thickness of material for both the base and backing.

# data[].attributes.body
Hi Madhav, the width of the base is way too long, much longer than 4 parts of its height. The base does not seem to be able to see through from the bottom. The thickness for the base is inaccurate and there is no thickness of the material for the backing.

# data[].attributes.body
Hi Shawn, the length of the base is less than 6 parts of its height. Certain part of the thickness for the backing is inaccurate. You can also improve on the neatness of the lines, do draw fine neat lines.

# data[].attributes.body
Hi Daniella, generally your isometric sketching is very well-drawn. Perhaps you can improve on the thickness of the backing, as it is not so obvious in your sketch.

# data[].attributes.body
Hi Anliora, the width of the base is more than 4 parts of its height. Certain part of the thickness for the backing is missing. In general, your isometric sketching is well-done, just have to better gauge the size of your drawing.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ___Yes.___________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________Yes.________________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: ___Yes.___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______No________________________
If your answer to the above is 'no', explain which part can be improved.
Ans:The shape appears to be smaller.,______________________________
_____________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: __yes they do________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _________it is fine _____________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ____________yes _______they are stright_______lines____
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: ______yes_________i am not sure.______if it is stright_________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________yes________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

ResemblanceComparing the 2D shape with the isometric sketching, do they resemble?Ans: If your answer to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________b) Isometric linesAre the vertical edges of the display unit drawn as vertical lines?Ans: ___________________they__________Are the horizontal edges of the display unit drawn as 30 ° lines?Ans: ____________________yes__________If any of your answers to the above is 'no', explain which part can be improved.Ans: ____none it is perfect,....___________________________________________________________________________________________________________________________c) ProportionAre the base and the backing in proportion ? Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.Ans: _______________________yes_______If your answer to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________

ResemblanceComparing the 2D shape with the isometric sketching, do they resemble?Ans: If your answer to the above is 'no', explain which part can be improved.Ans: ____________________yes, they resemble___________________________________________________________________________________________________________________b) Isometric linesAre the vertical edges of the display unit drawn as vertical lines?Ans: ____________________no__________Are the horizontal edges of the display unit drawn as 30 °  lines?Ans: _______________yes_______________If any of your answers to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________c) ProportionAre the base and the backing in proportion ? Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.Ans: _______________________yes_______If your answer to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________

📎 Photo

# data[].attributes.body
Hi Jaeden, the base of your display unit does not seem to be able to see through from the bottom. Certain part of the thickness for the backing is missing. Generally, you did a very good isometric sketching.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: __Yes____________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ________Yes______________________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: _________yes_____________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______Yes________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________ ____________
_________________________________________________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans:Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: Yes
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans:No
If your answer to the above is 'no', explain which part can be improved.
Ans: The backing is too long. Other then that, it is quite ok. Also, you are not suppose to draw the shaded part of the backing.

You may copy and paste these questions on your post. And then answer these questions accordingly.

# data[].attributes.body
Hi De Qiang, the left side of the base is shorten than the right side. The thickness of some part of the backing is inaccurate. In general, your isometric sketching is quite done!

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: YES
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: yes
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: No
If any of your answers to the above is 'no', explain which part can be improved.
Ans: The 30 degree line on the left is a bit higher than 30 degree

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _yes________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _The backing is slightly out of shape as the top of the shape is too narrow.___________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: yes___________________________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: yes___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: _The vertical edge of the backing is not vertical, which makes the backing appears that it is falling backwards. Besides, the left horizontal edges are more that 30 o and the right horizontal edges are less than 30 o ._________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _y__________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _The width of the base is too long with respect to its length and height. The thickness of the material is all way too thick. There is also no thickness for the backing.__________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: Y ______________________________
If any of your answers to the above is 'no', explain which part can be improved.

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: No
If your answer to the above is 'no', explain which part can be improved.
Ans: The thickness of the backing changed when it reached the top part.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes they do look alike in thickness too.

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Mostly yes except some lines.

Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: yes

c) Proportion
Are the base and the backing in proportion ?

Ans: _yes__________________________

# data[].attributes.body
c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: -------

# data[].attributes.body
Hi Samuel, some of the lines drawn for the base are not straight. The left side of the base is shorter than the right side.  The width of the base is more than 4 parts of its height. The thickness of the base is not obvious, and there is no thickness of material for the backing.

# data[].attributes.body
DQ'S BOOTIFUL SKET

# data[].attributes.body
Comparing the 2D shape with the isometric sketching, do they resemble?
Yes the the drawing was very accurate.
Are the vertical edges of the display unit drawn as vertical lines?
Yes
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Maybe not,
The sketching is quite small

# data[].attributes.body
Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: No
If your answer to the above is 'no', explain which part can be improved.
Ans: Your sketch is slightly thinner than the original shape (towards the left side and near the centre) and the radius of your semicircle is slightly longer than the original length.

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes but slightly incomplete
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: One side is but the other side is slightly crooked.
If any of your answers to the above is 'no', explain which part can be improved.
Ans:

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: Not really. The length and breadth are the same length, but the height is alright.
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

You may copy and paste these questions on your post. And then answer these questions accordingly.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans:Yes _________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ____________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans:Yes___________________________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: Yes____________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: __________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ___Yes________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ___________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: Yes
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: No
If your answer to the above is 'no', explain which part can be improved.
Ans: The backing is a bit thin
_________________________________________________________________________________________________________

# data[].attributes.body
b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: Yes
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ------

# data[].attributes.body
Nice shade ...
pls draw bigger.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ------

# data[].attributes.body
Angela's sketch

# data[].attributes.body
Daniella's sketch

# data[].attributes.body
Hi Darius,  the base of your display unit does not seem to be able to see through from the bottom.  There is also no thickness of material for the backing. The shape of the backing is very well-drawn though.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: The 2D shape mostly resembled with the isometric sketching drawn.However, the top part of the line which touches the square is slightly longer than the isometric sketching.
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes, it is neatly drawn vertically .
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: yes, it is drawn as 30 degree lines.
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: The length of the display stand is slightly shorter than the display. It could be longer to make the work more even.The rest are fine.
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

# data[].attributes.body
Hi Rachel, the length of the base is longer than 6 parts of its height. The left side of the base is also longer than the right side. Certain part of the thickness for the backing is missing.

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _No________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _The backing is slightly out of shape as the top of the shape is too narrow.___________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _ No ___________________________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: _ No ___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: _The vertical edge of the backing is not vertical, which makes the backing appears that it is falling backwards. Besides, the left horizontal edges are more that 30 o and the right horizontal edges are less than 30 o ._________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _No__________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _The width of the base is too long with respect to its length and height. The thickness of the material is all way too thick. There is also no thickness for the backing.__________________________

# data[].attributes.body
a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 °  lines?
Ans: ______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________