# data[].attributes.body
truss, in architecture and engineering, a supportingstructure or framework composed of beams, girders, or rods commonly of steel or wood lying in a single plane. A truss usually takes the form of a triangle or combination of triangles, since this design ensures the greatest rigidity.

# data[].attributes.body
A thread is a basic unit of CPU utilization, consisting of a program counter, a stack, and a set of registers, ( and a thread ID. ) Traditional ( heavyweight ) processes have a single thread of control - There is one program counter, and one sequence of instructions that can be carried out at any given time.

# data[].attributes.body
an act of describing or identifying something precisely or of stating a precise requirement.

# data[].attributes.body
A site plan is a readable map or a residential diagram depicting the plot of land on which the house sits, along with landscape topography and any exterior features or structures such as a detached garage, in-ground swimming pool, large trees, fencing, utility poles and power lines, driveways, easements, etc.Sep 8, 2019

# data[].attributes.body
A sill plate or sole plate in construction and architecture is the bottom horizontal member of a wall or building to which vertical members are attached. The word plate is typically omitted in America and carpenters speak simply of the "sill". Other names are ground plate, ground sill, groundsel, and midnight sill.

# data[].attributes.body
In reference to architectural drawing, the term sectiontypically describes a cut through the body of a building, perpendicular to the horizon line. A section drawing is one that shows a vertical cut transecting, typically along a primary axis, an object or building.

# data[].attributes.body
A schedule or a timetable, as a basic time-management tool, consists of a list of times at which possible tasks, events, or actions are intended to take place, or of a sequence of events in the chronological order in which such things are intended to take place.

# data[].attributes.body
The term riser is used in the construction industry for any type of pipe, culvert, shaft, etc. that rises up in a vertical direction. A riser can be a waterline, sanitary line, air shaft, ventilation piping or shaft, catch basin vertical section, manhole vertical section, etc.

# data[].attributes.body
A high-rise is a tall building or structure. · Buildings between 75 feet and 491 feet (23 m to 150 m) high are considered high-rises. Buildings taller than 492 feet (150 m) are classified as skyscrapers. The materials used for the structural system of high-rise buildings are reinforced concrete and steel.

# data[].attributes.body
A plot plan is an architecture, engineering, and/or landscape architecture plan drawing—diagram which shows the buildings, utility runs, and equipment layout, the position of roads, and other constructions of an existing or proposed project site at a defined scale.Plot plans are also known more commonly as siteplans.

# data[].attributes.body
Platform framing (also known as western framing) is the most common framing method for residential construction where each floor of a pole barn or conventional building is framed independently by nailing the horizontal framing member to the top of the wall studs

# data[].attributes.body
A plan means, top view of any building or object. Floor plan is the most fundamental architectural diagram, a view from above showing the arrangement of spaces inbuilding in the same way as a map, but showing the arrangement at a particular level of a building.

# data[].attributes.body
a rounded edge of a step or molding.

a metal shield for a rounded edge of a step or molding.

# data[].attributes.body
An architectural model is a type of scale model - a physical representation of a structure - built to study aspects of an architectural design or to communicate design ideas. Depending on the purpose, models can be made from a variety of materials, including blocks, paper, and wood, and at a variety of scales.

# data[].attributes.body
a length of timber or steel supporting part of the structure of a building, typically arranged in parallel series to support a floor or ceiling.

# data[].attributes.body
The header spans an opening for a window or door or it is a cut-out in the roof or floor for a skylight, chimney, or staircase. Typically at least twice the size of surrounding framing members, a header is often built up from two studs, joists, or rafters.

# data[].attributes.body
The foundation plan is a plan view drawing, in section, showing the location and size of footings, piers, columns, foundationwalls, and supporting beams. A foundation plan ordinarily includes the following: • Footings for foundation walls, piers, and columns (hidden lines)

# data[].attributes.body
In architecture and building engineering, a floor plan is a drawing to scale, showing a view from above, of the relationships between rooms, spaces, traffic patterns, and other physical features at one level of a structure. Dimensions are usually drawn between the walls to specify room sizes and wall lengths.

# data[].attributes.body
Geometrically, an elevation is a horizontal orthographic projection a building on to a vertical plane, the vertical plane normally being parallel to one side of the building. Architects also use the wordelevation as a synonym for façade, so the "north elevation" is the north-facing wall of the building.

# data[].attributes.body
an architectural Detail is a small piece of the whole, yet it has the power to characterize and define the entire building. ... Additionally, the design of a simple connection can and should be indicative of the designer's attitude toward the building in general; indeed, detail is architecture at its smallest size.

# data[].attributes.body
a line on a map joining points of equal height above or below sea level.

# data[].attributes.body
are a type of authorization that must be granted by a government or other regulatory body before the construction of a new or existing buildingcan legally occur. The U.S. Census Bureau reports the finalized number of the total monthly building permitson the 18th working day of every month.

# data[].attributes.body
Building Information Modeling (BIM) is an intelligent 3D model-based process that gives architecture, engineering, and construction (AEC) professionals the insight and tools to more efficiently plan, design, construct, and manage buildings and infrastructure.

# data[].attributes.body
Building codes are sets of regulations governing the design, construction, alteration and maintenance of structures. They specify the minimum requirements to adequately safeguard the health, safety and welfare ofbuilding occupants.

# data[].attributes.body
is a style of wood-house building that uses long, vertical 2" x 4"s for the exterior walls. These long "studs" extend uninterrupted, from the sill on top of the foundation, all the way up to the roof.

# data[].attributes.body
is simply the technical drawingof a house, a building or any kind of structure. ... It's a schematic representation of a building. Architects, for instance, use architectural drawing to convey and develop a design idea into a coherent proposal. Also, they use it to communicate ideas and concepts.

# data[].attributes.body
specialized ruler designed to facilitate the drafting and measuring of architecturaldrawings, such as floor plans and orthographic projections. In scientific and engineering terminology, a device to measure linear distance and create proportional linear measurements is called a scale.

# data[].attributes.body
refers to the process of reusing an existing building for a purpose other than which it was originally built or designed for.

# data[].attributes.body
are the edges of the roof which overhang the face of a wall and, normally, project beyond the side of a building. The eavesform an overhang to throw water clear of the walls and may be highly decorated as part of an architectural style, such as the Chinese dougong bracket systems.

# data[].attributes.body
a large window consisting of a central arched section flanked by two narrow rectangular sections.

# data[].attributes.body
a window that projects vertically from a sloping roof.

# data[].attributes.body
Location: Stephansplatz 3, 1010 Wien, Austria
Made: 882

# data[].attributes.body
Location: III. nádvoří 48/2, 119 01 Praha 1-Hradčany, Czechia
Made: 90

# data[].attributes.body
Location: 9 The Cl, Winchester SO23 9LS, United Kingdom
Made: 926

# data[].attributes.body
Location: Achter de Dom 1, 3512 JN Utrecht, Netherlands
Made: 765

# data[].attributes.body
Location: 1 The Cloisters, Exeter EX1 1HS, United Kingdom
Made: 619

# data[].attributes.body
Location: Cathedral Green, Wells BA5 2UE, United Kingdom
Made: 780

# data[].attributes.body
Location: Domkloster 4, 50667 Köln, Germany
Made: 771

# data[].attributes.body
Location: 16 Cloître Notre Dame, 28000 Chartres, France
Made: 799

# data[].attributes.body
Location: 30 Place Notre Dame, 80000 Amiens, France
Made: 749

# data[].attributes.body
Location: Place Etienne Dolet, 18000 Bourges, France
Made: 1230

# data[].attributes.body
The Salisbury Cathedral was finished 1220. This is located in the United Kingdom.

# data[].attributes.body
Location: Laon, France.
Made: around 1160, on the site of an ancient basilica that had burned down in 1111 during an insurrection. The new cathedral was completed in 1230. The second half of the 13th century saw the start of work on the side chapels.

# data[].attributes.body
Location: Paris, France
Made: 1345