# data[].attributes.attachment_caption
Storage wetbags, liners, hemp & bamboo boosters, cloth wipes, nippa.

# data[].attributes.body
* Large sloths wetbag.
* Medium minibus wetbag.
Both are used for storing used nappies & wipes at home or when out and about.

# data[].attributes.body
*Use inside nappies to act as a stay-dry layer and to reduce stains.
*Not necessary inside pockets (already fleece lined)

# data[].attributes.body
Use to secure the bamboo terry.
Place the left side down and hold with your thumb, then stretch the right hand side until it grips. Then pull the botton grip until it catches in the fabric.
The ideal position should have a fair amount of tension, and not feel loose at all (or it will ping off inside the wrap) - it should look like a capital Y, not a T shape.

# data[].attributes.body
* Bambinex fleece & cotton wipes
* Small wetbag for storage, or using out & about.

Wet as you go for changes - simply run under the tap, squeeze out, and wipe! Store in wetbag with used nappies.
* Dampen a handful to take out in the small wetbag for the day. Used ones can be stored with dirty nappies.

# data[].attributes.body
* The original cloth nappies!
* All will need a wrap over the top.
* Mix and match wraps with inner nappies, to find your preferred combination.
* Most economical system - you need roughly 1 outer wrap to 3/4 nappies.
* The best system for heavy wetters, long naps, and also, for overnight use. These are the most absorbent nappies.
* Use a fleece liner to keep baby from feeling dampness on their skin.
* Fitted nappies are slow drying, terries and prefolds extremely fast. Having a mix gives you flexibility to cope with colder, damp weather.
* On younger babies, may seem bulky under clothes (size up in vests, use vest extenders, or use looser styles or stretchy trousers).

# data[].attributes.attachment_caption
(Top) Totsbots Bamboozle; Little Lamb size 2. (Bottom) Little Pants bamboo Terry; cotton prefolds X 2.

# data[].attributes.body
Two part nappies have their absorbent and waterproof parts completely separate. This allows extra boosting to be added if necessary (eg to use overnight), and separation for drying. It also means you can mix & match brands of nappy and wrap.

* Note: the Little Lamb nappy comes with its own, fluffy fleece liner. This is separate to the other liners in the kit.

# data[].attributes.attachment_caption
(L) Little Lamb bamboo boosters; (R) Thirsties hemp, Ella's House hemp bum booster. 

# data[].attributes.body
Bamboo boosters X 5
Hemp boosters X 2

The Brainy Bums small snap-in insert and the Totsbots Bamboozle pads can also be used to boost other nappies.

# data[].attributes.attachment_caption
(Top) Totsbots Bamboozle; Little Lamb size 2; Blueberry Capri. (Bottom) Motherease Airflow M; Motherease Airflow L

# data[].attributes.body
* The Little Lambs and L Airflow (foxes) wraps are from 20lbs+ . The Totsbots and Blueberry wraps will fit from 12lbs+. The M Airflow (ocean) is for babies from 12-20lbs

* If not soiled or damp at the legs, wraps can be wiped down and reused at a change.

* Wraps don't need to be tight; simply ensure that all of the nappy is covered and none is peeking out.

* The Airflow wrap should have a loose, bloomer style fit (see fit guide); all other wraps should be tucked to the knicker line. The size 1 Little Lambs and Medium Airflow will fit up to 20 lbs (9kg).
The size 2 Little Lambs and M/L Airflow fit from 20lbs+

* If not soiled or damp at the legs, wraps can be wiped down and reused during a change.

# data[].attributes.body
* Large wetbags x 2
* Small wetbag x 1
* Cloth wipes x 10
* Nippa
* Fleece liners x 21
* Bamboo boosters x 5
* Hemp boosters x 2

# data[].attributes.attachment_caption
(L-R) Little Lamb bamboo, Little Weeds hemp, Totsbots Bamboozle pads; Brainy Bums small insert.

# data[].attributes.body
Little Lamb bamboo x 5 - add to any nappy to increase capacity.
Little Weeds hemp x 2 - trifolds - fold into thirds - use inside wraps, inside pockets, or to boost nappies for using overnight.
Totsbots Bamboozle pads - snap into the Totsbots Bamboozle wrap to turn it into an all-in-two (Ai2)
Brainy Bums small snap-in insert - for young infants using the Brainy Bums pocket on the smallest setting, who don't need all the absorbency. Can also be used with any pocket, or inside a wrap.

# data[].attributes.body
* Boosters add more absorbency, making nappies last longer between changes.

* Boosters can be added to virtually any nappy; fold them over or double up as needed.

* Boosting is generally essential for nights.

* Be aware that over-boosting closely fitted AIO or pocket nappies may distort the fit, making leaks more likely. Check that leg elastics aren't gaping.

# data[].attributes.attachment_caption
(Top) Bambino Miosolo; Motherease Wizard Uno; Bear Bott; Thirsties Natural AIO. (Bottom) Totsbots Easyfit Star; Little Lovebum; Hippynut Wholenut; Modern Cloth Nappies.

# data[].attributes.body
* Fleece liners are optional, will prevent stains.
* Very convenient for the change bag, childcare, grandparents etc.
* Need to be correctly fitted (see fit video), but are most like disposable nappies in terms of convenience.
* Overall, not as absorbent as Two Part nappies.
* However, can often be boosted, as long as the leg fit isn't compromised.
* Slow drying, cannot be tumbledried.

# data[].attributes.body
All-in-twos are very similar to All-in-ones, except that the absorbency poppers in and out of the waterproof outer shell. This is so you can separate them after washing, to speed up drying time. Once it's poppered together, you use the nappy exactly the same as an AIO.

Many brands sell extra inserts separately to the covers. Spare inserts can be poppered into the cover as soon as it's dry, while the original set are still drying. This gives you a quick laundry turnaround, and is more cost-effective than buying full nappy sets.

# data[].attributes.attachment_caption
(Top) Alva; La Petite Ourse; TJs Premium; Little Lamb One-size. (Bottom) Peachi Baby; Brainy Bums; Baba & Boo; Green Cheeks.

# data[].attributes.body
* Pocket nappies are changed in one step like AiOs/Ai2s, but the absorbency is tucked inside in the form of pads, which are stuffed inside a pocket formed by a fleece layer sewn to the waterproof outer shell. The fleece layer means the nappy has an inbuilt stay-dry layer.

* Fleece liners can be added if you wish to help with poo disposal, however, they are not essential.

* Pockets are more customisable than AiOs, as you can add or remove absorbency to suit your baby. Inserts of different materials can also be mixed and matched, for example, by pairing high capacity (eg Hemp, like the Green Cheeks insert) with quicker absorbing ones (eg cotton, such as a small prefold or folded face flannel).

* When you take the nappy off, remove the insert, so it is properly cleaned in the wash.

# data[].attributes.body
* For smaller babies, fold at right angles to the fold lines, as shown, rather than along the lines. This creates a band of more absorbent material in the middle, and it will fit in the wrap on shorter settings.
* For larger babies, fold along/with the lines, to use more of the length.
* If wrap is not soiled, you can replace a prefold and reuse the wrap several times over the course of a whole day.

# data[].attributes.body
* Slip the folded prefold under the flaps in the wrap.
* Top with a fleece liner to keep skin feeling dry and help prevent stains.
* Once the wrap is stuffed with a prefold and liner, you can do up the nappy and store it, just like an AIO/AI2/pocket. Very easy to pack in the change bag.

# data[].attributes.body
* The original one size fits all, birth to potty, day/night nappy!

* Terry nappies are incredibly versatile because you can vary the fold as you wish - though you really only need one that works for you.

* Always get a custom fit to your baby.

* Any of the wraps will work over them.

* Use a fleece liner to keep baby feeling dry; roll the leg cuffs inwards to get a neat cuff, ideal for preventing explosions.

* Folding them is as easy as folding your own clothes!

# data[].attributes.body
The origami/bat fold. Very adaptable, though you may find with older babies (10 mo+) that you need to adjust the fold to have long enough wings to stretch round the waist.

# data[].attributes.attachment_link.title
Terry Square - The Bat Fold by The Nappy Lady

# data[].attributes.attachment_link.description
How to fold a Terry Square into the The Bat Fold Demonstrated by The Nappy Lady

# data[].attributes.attachment_caption
Terry Square - The Kite Fold By The Nappy Lady

# data[].attributes.body
The kite fold - quick and easy for wriggly older babies.

# data[].attributes.attachment_link.readable_text
Terry Square - The Kite Fold By The Nappy Lady

Why this ad?

CoQ10 Can Help Women Conceive

Trying to start a family? Get the result you are hoping for with CoQ10.

pharmanord.com

If playback doesn't begin shortly, try restarting your device.

0:00

3:36

1:55 / 3:36•Watch full video

# data[].attributes.attachment_link.title
Terry Square - The Kite Fold By The Nappy Lady

# data[].attributes.body
The 'Jo' fold - ideal for younger infants, as it's trim and the wings tend not to reach as far round as the Kite.

# data[].attributes.attachment_link.description
Ease: 4/5Containment: 5/5Adaptability: 3/5Comments:Great for the newborn stage and nice and easyBest suited to 50cm terries, muslins, cotton birdeye flats an...

# data[].attributes.attachment_link.readable_text
0:00 / 2:39•Watch full video

# data[].attributes.attachment_link.description
In episode 1 of beginners guide to cloth, I share a simple guide of how to fit a cloth nappy correctly to avoid leaks and to keep baby comfortable.If you hav...

# data[].attributes.body
The size & fit of the nappy is adjusted by the poppers on the front ('the rise'), NOT the waist. Changing the rise adjusts the legs by making the legholes tighter or looser, and will either shorten or increase the length. A correctly fitted pocket should ideally sit with the elastics in the 'knicker line', to prevent chafing and leaks.

If the legs are gappy, they may leak. If you do have a leak, it is tempting to try and fix it by make the nappy tighter at the waist - however, this will not remove the gap, and will make it less comfortable for your baby. The waist does not need to be tight. If you can get 2 of your fingers inside the waistband, your child will be comfy when they sit up.

Left to right shows the nappies adjusted for babies of different ages and chubbiness - left is for young infants from 12lbs up, or petite younger walkers; middle is for chunkier older infants and larger walkers; right would be for older toddlers (2yrs+) or large centile babies with extra chubby thighs.

# data[].attributes.headline
Using a Motherease Airflow over a Two-Part nappy

# data[].attributes.subject
Using a Motherease Airflow over a Two-Part nappy

# data[].attributes.body
* Good for smaller babies as fairly trim fitting - sits lower below the belly than other brands, this is normal.
* The larger insert has a PUL layer as extra leak protection; this makes it slower drying. Twist inside out after a few hours, so all sides can air.
* Light wetters may not need both inserts; young infants can use the smaller of the two when the nappy is on the smaller setting. Older babies who are not heavy wetters may be fine with just the larger of the 2. However, always tailor absorbency to your baby's needs; if you experience leaks, add another insert, or a booster.
* Fleece topped, so no need for a fleece liner unless you choose to add one.
* After removing the used nappy, do up the velcro and turn inside out for washing, to protect the velcro during the spin.

# data[].attributes.body
* Generously sized, good for chubbier or high centile babies. Rolled elastics are soft on chunky thighs.
* The snap-in insert is in two parts, so you can customise the absorbency. The smaller of the two inserts could also be used as an additional booster in a pocket nappy.
* Flat inserts are easy to boost - simply add a Little Lamb booster before covering with a fleece liner.
* Top with a fleece liner.
* The wrap can also be used over the Bamboozle two-part nappy.

# data[].attributes.body
* Prefolds x 2
* Terry x 1
* Fitted nappies x 2 (** Totsbots has snap-in booster; Little Lamb has fluffy fleece liner)
* Wraps x 5

# data[].attributes.body
* Pockets x 8
* 14 x pocket inserts, assorted.
* AIOs x 8
* AI2 shells x 1 (** The Totsbots wrap is the same, and is used either with the AI2 inserts or the Bamboozle nappy)
* AI2 inserts:
Tickletots 2-part set
Totsbots 2-part set