# data[].attributes.body
the boiling point is when you have a constant temperature. Don't forget boiling chips! Control the temperature.

# data[].attributes.body
You can use water or alcohol for solubility

# data[].attributes.body
you use this to test the powers

# data[].attributes.body
use a stopper or a stirring rod for it

# data[].attributes.body
use about 5 ml of water for the test and only a little bit of powder in it. Using to much powder can give u a soluble liquid with excess.

# data[].attributes.body
grab a magnet from the front. the small ones are better. test your mental there. test if it reacts or not

# data[].attributes.body
If you are doing boiling point for powers and it goes over 100 the switch to the evaporation dish and wait for it to either react like decompose which would look black. turn clear which means it melted or it might not react at all.

# data[].attributes.body
you can use the evaporation dish to separate the power from the water

# data[].attributes.body
Get a Bunsen burner and light it. Get a stick from the front and dip it in your liquid. then move side to side with the stick to see if it reacts or not

# data[].attributes.body
Mass/ Volume

# data[].attributes.body
length x with x height or water distillation

# data[].attributes.body
use scale

# data[].attributes.body
Record temp every minute. Collect pure liquids. don't go over 105 degrees. In between each plateau there is a small plateau which is your trash.

# data[].attributes.body
Record temp every 30 sec. Mark when bubbles and boiling point.

# data[].attributes.body
Mark when you have bubbles and plateau and changing test tubes.

# data[].attributes.body
Use the capillarity tube and attach it to the terminator. Then fill your medium beaker with 100-150 ml of water. make sure the top of the tube is above water. Then watch the powder. If the water outside is boiling then move to the evaporating dish

# data[].attributes.body
use the evaporation dish to test the powder.

# data[].attributes.body
You pick apart the solids

# data[].attributes.body
You evaporate the liquid in a evaporation dish and watch glass. Use 10ml MAX

# data[].attributes.body
Add the solids to water. Filter the insoluble solid and evaporate the water the goes through the filter paper

# data[].attributes.body
Move the magnet gently through the mixture collecting any magnetic materials on the magnet. Use the scoopula or your hands to remove magnetic materials into a massing boat.

# data[].attributes.body
Use fractional distillation

# data[].attributes.body
Can be tested for nonmetal and Metal. Take the acid and drop it on the object. If it reacts then you should either see bubbles or smoke nothing else. If you missed it you can just do it again. Make sure to rinse off the acid in water.

# data[].attributes.body
Solubility of water
Solubility of alcohol
Micro Melting Point
(Evaporation dish if doing melting point)
Reaction with acid

# data[].attributes.body
fractional distillation
Boiling point
density
flammability
solubility of sugar

# data[].attributes.body
grab a pinch of sugar put it in your liquid and mix to see if it reacts.

# data[].attributes.body
Density
Acid test
Magnetic test
redo density