# data[].attributes.body
constructs a logical plan, which considers time and resources, sufficient for peers to be able to follow to create the solution.

Logical Plan
https://docs.google.com/document/d/1bVICzZPIa9PWdTwnVPHo0Jc9GZb8U2DUlZNKbWPBeVI/edit?usp=sharing

# data[].attributes.body
explains the need for a solution to a problem for a specified client/target audience.

# data[].attributes.body
constructs a research plan, which identifies and prioritizes primary and secondary research needed to develop a solution to the problem, with some guidance.

# data[].attributes.body
analyses a range of existing products that inspire a solution to the problem.

# data[].attributes.body
develops a design brief, which explains the analysis of relevant research.

# data[].attributes.body
develops design specifications, which outline the success criteria for the design of a solution.

# data[].attributes.body
develops a range of feasible design ideas, using an appropriate medium(s) and annotation, which can be interpreted by others.

# data[].attributes.body
presents the chosen design and justifies its selection with reference to the design specification.

# data[].attributes.body
develops accurate planning drawings/diagrams and lists requirements for the creation of the chosen solution.

# data[].attributes.body
demonstrates competent technical skills when making the solution.

# data[].attributes.body
creates the solution, which functions as intended and is presented appropriately.

# data[].attributes.body
describes changes made to the chosen design and plan when making the solution.

# data[].attributes.body
designs relevant testing methods, which generate data, to measure the success of the solution.

# data[].attributes.body
explains the success of the solution against the design specification based on relevant product testing.

# data[].attributes.body
describes how the solution could be improved.

# data[].attributes.body
explains the impact of the solution on the client/target audience, with guidance.

# data[].attributes.body
We can't design a bridge because when the 3D printer prints the bridge, the material isn't strong as bridges as the metal people uses to build is strong and stays the same shape but for printing a bridge, the material inside the 3D printer melts and if there is nothing below it. The material will go down and up messing the product up and causes it to look unpleasant.

# data[].attributes.body
Pop-grips, finger-ring, and arm phone holder are all in the same range as cell phone holders as pop-grips allow air-pod users to have a place to keep which is behind their phone so that they don't need to worry about misplacing their air-pods since it will always with their phone, finger-ring allows customers to have an easier grip to hold their phones since if they were to be tried of holding it with all of their fingers, they are able to hold it with one and it will prevent the phone from falling onto the floor as long as the customer is holding the ring which will allow them to prevent the phone from falling and lastly arm phone holders allow customers to travel with their phone on their arm which makes them able to jog and listen to music without their earphone's wires disturbing them and their phone not jumping out of their pocket when they run.

# data[].attributes.body
My target audience for my cell phone holders would be mainly for teenagers and adults as I would put more features in it such as putting your name down, drawings and more. I would say my phone holders would be mainly for apple users since they are one of the most popluar A cell phone holder allows them to use it in the car, homes, bikes and many more since it will allow them to empty their pockets and not worry about taking it out for things such as seeing their notifications since having a phone holder allows them to see it without the need of taking it out and only looking at the spot the cell phone holder is located, switching music without needing to pick it up as they can just tap it on the phone holder and it allows customers to not get freak out where they misplaced their phones since it will always be at their cell phone holder if they were to use it daily and have a spot to be able to keep their phone always. It makes it more convenient for their lives as they wouldn't need to take the extra step or pockets in order to keep their phone or use their phone at any time.

# data[].attributes.body
I would research the designs needed in order for the cell phone holder to stand or in order words work as it is intended to be. I would do secondary research of all other cell phone holder products to see what designs are needed in order to attract consumers in order to buy my product. I would make models of many different cell phone holders in order to see out of all my designs, which would be best suited for me to make and for my audience to use.

# data[].attributes.body
1) The length and width needed for the holder be able to hold the phone
ans: the length needed is 14 cm (5.5 inch) and the width needed is 7cm (3.5 inch) as the latest iphone measurements are those which will be able to hold any other type of iphones as well.

2) what makes a phone holder work and why consumers are interested in it
ans: Consumers are interested in phone holders is that they are for comfort since some people would be tired or annoyed of holding their phones and would place it on the phone holder to be able to watch a video, text and more. Productivity since they are able to keep their phone away from them if they have a task they want to get done and could get rid of distractions easily without worrying where they misplaced their phone since it will always be in that one spot

# data[].attributes.body
1) How to make my phone holder more creative
ans: I saw the different colors that companies has used to gives it more variety for them to pick and have something appealing for them. I also seen different types of where there would be a grip that will hold the phone in the air as it has a support on the rode they have in order for it to not collapse, another one where they made a chair design for the phone holder to sit on, a polar bear holding the phone on his back and more. With this information, I am able to design a phone holder that would be appealing for people to use my phone holder.

2) How to build a phone holder
ans: Depending on the design of the phone holder itself, I got to find the parts that needs support in order for the 3D printer material to not get the material to fall off and make the product look unpleasant or in worst case break, I learned more about the functions in fusion 360 such as making a new object inside the base of the object to make sure it sticks together.

3) watching youtube tutorials
ans: I watch some youtube videos in order to help me build my product as I will gain more knowledge on the software and will be able to utilize my findings to the software.

# data[].attributes.body
5

# data[].attributes.body
Width and length
The grip of the phone holder would be the length of 14cm (5.5 inch) and the width of 7 cm ( 3.5 inch) in order for the iphones of any kind to be able to function.

My holder is going to have a layer on the bottom because most iphones holders with a stand have a surface on the bottom which will be around 25 cm and width of 10.  I build a house and experimented with the 3D software called "Fusion 360" and I was able to learn new things such as how to build a 3D product without it falling apart or not have any lingering strings when building the edge since having something with no support underneath it can cause it to make unpleasant looks around the edges so with this I can apply with my phone holder since it's gonna have multiple shapes and in order for it to look as good as possible, so that the holders would look pleasant to use and making sure it won't collapse when being made. The arms would be at 30 degree in order to be strong and have support in order to be held, not break apart,

# data[].attributes.body
My phone holder is gonna have a simple design with ears on top on the holders and have arms on the sides of the holder to have something unique that people can enjoy seeing and have different ways of holding it. It's gonna have a flat surface underneath and above the surface, it's gonna have a rectangle shape on top of it that is ingrained within the flat surface itself so the material will be built in a way to not overlap each other. It’s only gonna have one simple color for its design as having multiple colors would be harder to print out.

What I need to look out for
I need to look out on how to stable the things I am trying to build so that the material from the 3d printer doesn't leak out while it is printing and make it joint also look presentable. I also need to watch out how I can support parts of my product in order for them to not fall off, being able to hold without parting it and make sure it would printing out without causing an issue. Make sure the weight and length are made to be big and able to place an iphone in the product, being able to make it stand and not fall down when I am making my design ideas.

# data[].attributes.body
I made this design with the intention to put the in a section where the phone can be place vertically, it would have a flat surface behind it so the phone doesn't slip off and I will be able to print it since the pouch will have support underneath it in order for pouch will not fall off.

# data[].attributes.body
- Measurements of the phone so that I will be able to make my phone holder to hold it with an appropriate length and width. The measurements I have gotten are  15.39cm (6.06 inch) for the length and 7.56 cm (2.93 inch) for the width

- Shapes I need to make. Looking at all the available shapes in fusion 360 and how I can use them to make my product.

- information gathering on fusion 360, finding out more about the software and figuring new methods I could use to build my product.

- functions I would be using. Figuring out which functions I need to use that are necessary for me to have instead of trying out each functions and seeing how it would go since it could mess up the process of me creating the product.

- How I'm gonna export my idea from tinkercad to fusion 360 then to the printer by seeing the exports that each of the program have that would allow to edit from each other and also how it would be printed or looked like in the printer.

- Doing printed trials on my product to see if my product is being printed as I ideal meaning the size, strength of it and to see if it is able to hold an iphone.

# data[].attributes.body
The handlers on the side of the phone holder bring a unique look to the phone holder and have multiple ways to hold it.  I design it in a way that will be able to print by having support build below it in order to make sure the material doesn't wonder around and to not make the handles drop out.

# data[].attributes.body
This phone holder design is made to be simple as it would have to support behind it for the stand to lay down and make sure it doesn't fall all the way down then have a block in front of it to place the phone in which allow the phone to stand.

# data[].attributes.body
I have chosen the design with a phone holder with a pouch as the design looks the most neatest, simple and probably the most effective ones to build since the pouch is design to put the phone in that specific spot to place their phone in vertically as it slides down to the end of the pounch. I have given the support it needed in order for the big block to not fall apart and made sure that the pieces are joined together so that it doesn't overlap with each other and the 3D printer is able to print without facing a problem of the material leaking out since I have build since they are joined and also with the support, the pouch has the support to stay up.

# data[].attributes.body
This would be how I want my final product to look like, I have a slope on the behind of the block to make sure it won't fall off, when building the pouch I place a block underneath it as I want these two to join so that when the 3D printer is printing this product, it would make sure these two will support each other and to not collapsed when it is printed since the pouch would have something to fall on.

# data[].attributes.headline
Trying out fusion 360 and seeing where the blocks would be place.

# data[].attributes.subject
Trying out fusion 360 and seeing where the blocks would be place.

# data[].attributes.body
This trail of making the phone holder is made in order to see which parts of blocks such as square and rectangles I need and what other functions I need to use in order to make it complete and functional. This version is mostly a trail and error for me to get use to fusion 360 as theirs still more I need to learn as I find that making a slop is harder that I expected because I have to put it at a specific spots and only certain sides are able to make a slope out of that shape

# data[].attributes.body
The shapes that I need for the phone holder are mostly boxes and rectangles as in fusion 360, those shapes are what I need at the most part to make the phone holder for the base, pouch and supports. The boxes or squares and are what I used mostly for the part where its on the base and using them as supports below the pouch also for the back on the middle object so that so that both of these parts won't fall off and to make sure the 3D printer is able to print it without any malfunctions or errors. The rectangles are used to make the base of the phone holder so all the other parts will have something to build off and it was used for the pouch as well since I wouldn't need to extrude it to make sure it's the exact shape I wanted since it's already the shape I needed.

# data[].attributes.headline
How much time I would need to build this 

# data[].attributes.subject
How much time I would need to build this 

# data[].attributes.body
I plan myself to send time on this project for at least 30-40 mis within the weeks so that I can spend sometime working on it while being able to work on other subjects as well, this would also let me to save some things for another day cause completing this project within on day especially for a beginner can be stressful due to the mistakes I made and if I were to keep going longer, I might mess up so it's better if I spend some time with it and learn the program more as I complete this project

# data[].attributes.body
Since I have never used fusion 360 before, I decided to look at videos at times when there was something I wanted to do or if there was a problem that occur while creating this project as one of the things I found annoying was when I create a new sketch and try to extrude it and once I were to finished that piece, I would want to go and create on something else but when I do try to do something else. That shape I made were either to disappear or remove the length that I extrude which then I later on learn that if you right click your mouse there would be a button that says done which will then allow me to not control that piece anymore and I am able to move on to something else.

# data[].attributes.body
When I was building my product, I notice that in fusion 360 I may not be able to make a sketch or place a shape exactly to my liking as for example when I used the rectangle for the pouch I wasn't able to make the exact measurement needed for the phone to slide in and to make sure the phone is able to stand on it. So I used the extruding function to make it so that I would have the exact measurements I need to make it successful. I also use the extrude in a different manner such as once I got the distance needed for it I use the extrude function to increase height of it then make another rectangle on it. Afterwards I use the extrude method to push the shape I made down in order to make it have the space I need to place my phone in as if it were to be placed vertically, I would need my pouch to have that sort of shape to make my phone stand.

# data[].attributes.body
I used the modifying feature called fillet in order to make the supports I needed for my product to stand and for the 3D printer material not falling off when printing. I done this by first making a box and then select that feature then change the sides of that shape to make some form of an arc that will be strong enough to hold my produce for the middle object and the pouch to not fall off and to make sure it's printed in a way that will not cause the material to go loose.

# data[].attributes.body
This function is what I mostly use for my project as it is simple to use and helps me to reach the design that I want to make as I can make any shape fit to the right measurements that I want them to have. it also allow me to join two shapes together so when it prints they would be combine and the material wouldn't make it seem like two different shapes instead of it being one.

# data[].attributes.body
Different supports
I decided to change the support I wanted to give the pouch in front of it to become two separate supports where there will be two pillars, one at the front below the pouch and one at the back of the pouch so that way when I do 3D print the product. The pouch would be fine since the material wouldn't go down and it also made the product look much better to my liking, the pouch will be able to stand and allow it to be printed properly.

# data[].attributes.body
I was able to make the shapes that I created to join together so that I could make varieties of things such as the pouch where I extrude it from the middle block in order to make build from the inside to make it more durable and when making the support I made the shape then extrude it which later on I made it join instead of cut so that they can form into one shape. when making the pouch I create another shape on top of it then extrude down and make it to cut in order of me to have a place where I can place the phone in.

# data[].attributes.body
Formative - 5
Summative - 6

# data[].attributes.body
Could do with a higher level of analysis for each product.

4

# data[].attributes.body
There must be more requirements for your product e.g. Strong, Durable, Well-balanced.

4

# data[].attributes.body
My product is able to hold the iphone both vertically and horizontally but the horizontally being somewhat functional as the product doesn't completely covers the Iphone but does still allow it to lay down without the product collapsing and stays in one spot. The product is strong enough to hold an iphone which shows that the support and parts I have design has worked as intended and the product not falling apart shows that I am able to make my parts of the product to stick together and printed without malfunctions that could ruin the product.

# data[].attributes.body
I use the join functions to make sure my shapes connected to each other and that it doesn't cut one another such as when I'm trying to make the pouch, I place a shape on the main body and then extrude it which later one I change it to join instead of cut so that the shape I made doesn't disappear or destroy the shape that I place it on it.

# data[].attributes.headline
Ruler in fusion 360 to measure the size of the phone holder to collect data

# data[].attributes.subject
Ruler in fusion 360 to measure the size of the phone holder to collect data

# data[].attributes.body
In fusion 360 there's a function where you are able to measure the length of the product you have made. In the tool section there's there's an ruler icon so I clicked on it then later on start measuring and collect data of the size.

# data[].attributes.body
I use the shape tool function to make my products such as squares and rectangles in order to make the main body of it, the platform and more then use extrude and more to change the shapes.

# data[].attributes.body
I used the shape function as intended and was able to build my product as intended such as the placement of each shape I used is used as expected without causing any problems to other existing parts such as accidently cutting or join shapes that are not intended to do.

# data[].attributes.body
Level 6

# data[].attributes.body
I used the ruler function in fusion 360 to measure parts of my product to be able to get the right measurements needed to my the iphone in, to hold the iphone and the size of the product as well so it wouldn't be so big or so small that would cause issues for my phone holder.

# data[].attributes.body
After printing my product, I discovered that at the front portion of the pouch has become tangle and messy as it doesn't has support underneath it. I wanted the pouch to not have the support fully cover up the pouch but due to this decision, the pouch becomes as it is now so in my final print I got to make sure the pouch is fully supported so that the material won't stumble and make sure it doesn't have a long string where it bends down and up making it look ugly and wasting more materials while printing. Another change I have to do is to increase the width of the pouch as when I tried to place my phone horizontally, it doesn't fit since I made it too small while resizing it in cura however it was able to hold my phone vertically so my product is functionable to a certain degree. In order to avoid this issue I would need to make sure the measurements I need to have while resizing it in cura so that my width or length will be at the appropriate size, I would need to expand width and length as well so that it would be able to hold my phone properly in my final print. I also decided to add a new detail to my product and that is to have a spot where I can place my phone and charge it as well since horizontally I can just charge it then place it on the phone holder but vertically I don't have that choice since if I do charge my phone then place it, the charger put can smushed. So I decided to make a hole on my product at the front of the pouch and at the top of it as well by making sure they are both able to meet and to make sure the hole isn't big enough to the point the my phone does fall through, I did this change cause it allows me to have a spot where I can place my phone in and charge it at the same time is really convenient to have.

# data[].attributes.body
I have a demo print of the product to see how it would turn out. As expected not having the pouch to full cover up, it stumbles and make it look messy. I also realized that I can remove certain parts of the product like the base of it as it doesn't need it to stand or make it functional or I just remove that part. The demo print also showed me how important having the precise measurement in cura or in fusion 360 is as when I resize my product, it messes up my measurements which then cause my phone to only be hold by my product vertically but not horizontally since it doesn't fit that way.

# data[].attributes.body
When my product is printing. It has some of the material being tangle in certain places and that is due to not having support or the way it was designed. Below the pouch of one of the supports are shorten and I did this because I wanted to save plastic however that cuz the material to tangle and although it doesn't look like it's a big issue, the texture of that area and the small materials spring outside of certain places does make it less appealing.

# data[].attributes.headline
Decrease use of plastic in the product  

# data[].attributes.subject
Decrease use of plastic in the product  

# data[].attributes.body
My product does use more plastic than needed so next time I could add functions like chamber to bend some corners to bring a different visual to it and mostly reduce the use of plastic as the product will still function either way.

# data[].attributes.body
I was somewhat able to figure out the scale needed for the product to be printed as my pervious test was to small and it would mostly likely be able to support both horizontally and vertically if scaled right therefore by using the scale function in fusion 360 and some calculations I was able to make an estimate on the correct size in order for my iphone to fit vertically and horizontally.

# data[].attributes.body
The part that my pouch is connecting to was increasing to an even bigger height so that the phone will be able to lean on it better and for it to reach the end of the pouch in an appropriate angle and in order to do that I get the measurements from the phone and then calculate the volume of the part then increased it to a certain amount in order to fit with my calculations that I have made.

# data[].attributes.body
The product could improve even more if I were to measure the Iphone and the product more frequently to see if it's design is made to hold the iphone in the right size. The Iphone is able to stand vertically on the product but doesn't fully achieved the objective of it laying down horizontally as it doesn't cover it up fully which is due to miscalculation or poor measuring which next time I would improve on since I have better knowledge on recording, calculating and applying it a real image of how the product should be/look like.

# data[].attributes.body
Overall the product works and the design of it is simple plus appealing to me and others. My phone is able to stand on the product both vertically and horizontally which shows that the improvements I made has done it purpose as it was able to reduce use of plastic, measure the right width and height for the phone to stand both vertically and horizontally, remove parts of the product that is not needed and I've able to scale my product to print in the right measure needed to make it functional.

# data[].attributes.body
Since this product was made for me specifically. I would say that I am quiet pleased with how it turn out as I am able to place my phone in both vertically and horizontally plus with there being space for my iphone to be charge on a stand does give me more freedom to use it anywhere and easier to use. Although I am a little upset on how the horizontal part of my iphone isn't able to fully fit with the product it still is functional. I really like the design I build for this product as it's a simple and an appealing design to look at since this was built for customers and me, I can say that others would be impressed or appealing as well.

# data[].attributes.body
Level 5

# data[].attributes.body
Level 4

# data[].attributes.body
Level 5

# data[].attributes.body
Level 6

# data[].attributes.body
Level 6

# data[].attributes.body
In this one you should have tested whether the phone fits on the phone stand.

# data[].attributes.body
Level 5