# data[].attributes.body
There are some Furnitures that was not included due to the time given for the making of the model.
- Inner wall for the separation of the kitchen and the living room
- The sofa and the tv in the living room
- Toilet and Sink in the bathroom.
- Table for dining room
- Counters for Kitchen

# data[].attributes.body
Taping- The process of taping is really hard to use and it is visibly shown on the house. It makes the model of the house look generally messy and unpleasant to look at. To improving the taping part of the details, simply change from normal tape to double sided tape. It leaves a much cleaner surface and the tape will not be as visible.
Cutting- Since the cutting is done using a crafting knife, it is not only hard to cut, the cuts are also not clean. To improve cutting, all that have to be done is to switch from using crafting knife to scissors which is not only easier to cut it is also easier to hold.

# data[].attributes.body
Eunsoo: I like the interior such as bed, carpet and I believe this is really cool. It is pretty good but try not to end everything with sketches, try to set and make everything. Overall, the structure is really good although I don't know where the entrance is. There are no windows and it will be great if there are windows. You can put some furniture, room structure, entrance and I feel like it might be too small and it seems like there are no time for you to finish.
Tester 2: The structure of the house is pretty good and try not to use hot glue next time because the hot glue is yellow and it shows through the white background. The overall design is pretty nice too.

# data[].attributes.body
(Picture to be uploaded)

# data[].attributes.body
Marking out shape of furniture and walls with a marker so the places to be carved will be easily seen.

# data[].attributes.body
This is the process of hot gluing the walls into the apartment, the yellow might be visible but it could be covered by paint if had time. The skill shown in this picture is hot gluing, this skill is needed because the walls will be needed to be glued together. "Please be cautious around hot glue gun as it is hot and it may be dangerous if not used in a mannered way "

# data[].attributes.body
The skill demonstrated in this picture is tape cutting, this skill is needed in order to cut the tape for it to be taped on the wall and the floor.

# data[].attributes.body
During the making of this house, I decided to change the shape of the house, it was due to the lack of time. Since I was not here for 1 working hour, I missed out the time on decorating the other half of the apartment making this an unfinished piece of work. I also decided to finish only half of the house. Since the other half of the house will be a duplicate of the other one and it will be puzzled together to save space.

Below is a sketch of Model:

# data[].attributes.body
While making the door, we first had to measure the lengths of the door and then we will need to use a pencil to mark the door. The last step of the making of the door is cutting it out with the scissors.

# data[].attributes.body
In this picture, glue is being put on the door for the wall to be glued on the wall.

# data[].attributes.body
The peer reviewing method is designed to get feedback from other people that made a similar product. To get feedback from peers and turn these feedback into improvements that could be made for the product.

# data[].attributes.body
The earthquake test is designed to test if the house is capable of holding up it self after dropped from a really high place. The test is performed with chosen heights, there is 20cm, 50cm, 1m and 2m. The model of the house will be dropped from each of these height, and will be measured by how it survives all of these heights.

# data[].attributes.body
The material of this model can be easily improved. The cardboard material used is not just hard to cut but it does not look nice with the other colors and designed on the cardboard. It can be improved into using 3D printers to make furnitures in the house instead of using cardboard. There are also other objects to also use for the windows and other things.

# data[].attributes.body
The design of the house can be improved by changing the design slightly. It will be better if the house is in the general shape of a square instead of cutting the square in half so they can fit into a puzzle. It is easier to live in houses that are squares and to stack them up instead of puzzling them together.

# data[].attributes.body
1, Compared to a real apartment and building, the final model may be too small for people to live in.
2,It is a disadvantage that there are no windows in this house, so there will be no sunlight. It also has a lack of furnitures compared to a real house.
3,There are only one door for going in and out of the house, usually multiple doors are needed incase of dangerous situations.

# data[].attributes.body
I believe my product/project will influence/effect my client in a positive way. This product is designed for a singles person's usage. A small spaced is designed for a living of a single person to not feel lonely. I believe this product achieved the points needed, for example a living room, a bathroom, a kitchen and a bathroom with separated bath and toilet.

# data[].attributes.body
The problem that happened was the over crowded space. The country that the problem occurs in is India. There are overpopulation in India, and it causes people to live without a house and just on the street. People won't have a shelter to live in due to overpopulation.

# data[].attributes.body
A solution for this problem is needed in India, because the lack shelter will effect a person by a lot. The solution for this problem is to create houses for a big family with a crammed space but to still to make sure everyone has a personal space.

# data[].attributes.body
Design Goal- The goal that this product is looking forward to achieve is to solve the problem or give an solution to the problem of overpopulation in India and how in a crowded space, it is hard to come up with solutions not just for enough people to live in but also done with a small budget.

Target Market- The target market of this product made will be the population of people from India. My research has shown me that most people from India actually does not own or live in a house.

Major Constrains- One of a major constrain for this product is that it is hard to have all the measurements of this product to be right. Some materials chosen for this product might be hard to construct due to the material provided. For example of wooden material houses can not be made.

Success Criteria-The success of this product will be that people can finally understand and maybe even accept this culture better/more. It will be even better if people started to learn this culture because of this product and it could inspire more people to become something they've always wanted to do. My research shows me that people will like an aesthetically good looking chair much better than a not so good looking one, even if it contains more information than the other chair.

# data[].attributes.body
Here are some Different shaped houses and both the benefit and the disadvantage for each of it:
Round Houses:
-Less Expensive
-Harder to be stacked up

Square Houses:
-More Expensive
-Easier to be stacker up

# data[].attributes.body
Wood Houses:

# data[].attributes.body
These are the 8 thumbnail designs, they may not all meet the specification due to the range of work they're in. Below are more pictures including the developed Design:

# data[].attributes.body
-There should be natural sunlight around the whole house so there will be many windows through out the building.
-It will require at least 2 bedroom and 1 bathroom for maximum use of people.
-

# data[].attributes.body
Modeling scalable housing (draft model)

21/2 - modeling techniques / inspiration / ideas
[internet resources, paper, tape, cutting tools]
27/2 - modeling
[card, paperboard, glue, cutting tools, tape]
28/2 - modeling
[card, paperboard, glue, cutting tools, tape]
1/3 - modeling / presentation
[card, paperboard, glue, cutting tools, tape]

# data[].attributes.body
There are lack of scale to multiple furnitures listed below:
-Counter
-Sofa
-Inner wall of Kitchen
-Shower