# data[].attributes.body
1. When selecting your materials how did you consider the availability of local resources and needs of the environment?

2. Did your house beat the flood? What evidence do you have?

3. What was the most challenging part of Beat The Flood STEM project?

4. What was the best part about the project?

# data[].attributes.body
Nicholas

1. We chose the village of Swazenzi, which has local brick makers and thus locally sourced bricks. Which we used to build strong walls. We also used wood from the other villages

2. Unfortunately it didn’t survive the flood, due to the roof which was not the strongest so water flooded in (although we thinks it’s Mr halls placement of the Shilna , on the side of the walls).

3. The most challenging thing was building it, the designing and planning the budget was easy. It was just actually building that was challenging.

4. Probably the reality of the situation, it feels like we’re actually there trying to build a house for someone to survive a flood.

# data[].attributes.body
1. My group mostly used hot glue, bricks and plastic which isn’t the most environmental but it worked the best for us and we didn’t really think of the environment.

2. Yes, our house was quite wet but only really on the bottom and on the top. If we made the door usable it would've made it easier for the marshmallow but it still kind of survived.

3. When we found out we had to make a door and a window which weren’t very useful in the end we had to break apart the Lego bricks and add a door then put it back together which wasted time and we could’ve added another layer to the floor.

4. The best part about the project for me was definitely building and hot glueing everything together it was really fun. Another thing was also seeing the experiment happen it was good to see how we can improve next time.

# data[].attributes.body
1. My groups Stem Beat The Flood house consisted of many resources such as wood, Lego bricks and hot glue. Our house was located on the milma village with a natural mountain protecting it. We had a main resource of wood due to our lumberjacks and wood cutters

2. Yes our house had beat the flood because of our strong outer walls and 20% discount on wood flooring. Shilna ( our sodium polyacylate ) survived with minimal blueness on her.

3. Our most challenging part of the challenge was trying to get a Shilna sized hole for the door (and for it to close )

4. The most enjoyable part of the build was the hot glue gun and being with my mates trying to make a resolutions to the problems.

# data[].attributes.body
1. We chose the Milma village because it had the highest land. And lots of nature, and we got 20% discount on wood

2. Shilna happily survived with a little bit on water on her

3. Our group struggled on getting shilna in the house because she didn’t fit

4. hot gluing the supporting beam on because i injoyed it

# data[].attributes.body
1. We chose the Milma village because on one side a massive mountain was protecting it. The Milma village gave us an advantage by a 20% discount for wood. We also used bamboo for supporting beams at the bottom of the house.

2. Our house survived the rainfall and Shilna survived the flooding pretty well and easily by hiding in the enclosed space.

3. The most challenging part of the stem project was trying to fit Shilna into the structure safely.

4. The best part of the project was hanging out with my mates and having a great time.

# data[].attributes.body
1. Our group chose the north east area of Hila. We thought that the glass and plastic wrap would hold the most water out although it is the most environmental because we had thought to do the glass on the top and bottom and our leftovers on the. We also did bricks which for the whole thing which is kind of environmental. They are the materials that we thought would hold off the most amount of water.

2. Our group thought we did pass because Shilna only had a tiny little bit wet. If we had made a door that could open and close then it might of not had that wetness.

3. Probably trying to consider how we could save money and get as much bricks as we needed with still having enough money for land and the other materials we had a discount on the bamboo so we did get enough without using as much money as we would without the discount.

4. The best part about this project was being able to work with my friends, being able to build and learn what we could do better next time and also testing it to see if it would pass or fail.

# data[].attributes.body
1. Our group chose the north east area of Hila. We thought about what is waterproof and what is a good idea we should put under the water proof material. We put bricks around the house which is kind of environmental.

2. Our group thought we did because Shilna only got a little bit wet and most of her was dry so we think we passed.

3. Probably considering what materials we should use and what materials are waterproof and what materials would be good for each part. And trying to do a door.

4. The best part about it was building the house and seeing if it passed or if it failed.

# data[].attributes.body
1.My group considered the materials that we decided on because they were gonna value and help our structure the most to our ability.

2.No we failed and our diaper flew up into a slushy. We could of build stands on the bottom to keep it up off the ground and avoid the water to keep our diaper from bursting.

3.Probally building the house frame. It did not really workout as well as we planned it to look like it wasn’t as planned at all. We had to change up our plans because of it.

4.Probally learning about reality in places like Africa's homes not being structured as well as the ones in Australia so that means we’re lucky to live in a good place like Australia.

# data[].attributes.body
1. My group mainly used bricks tape and hardwood which is not that good but not too bad for the environment we didn’t think much of the environment just on keeping Shilna alive

2. I think we passed because we had a working door and a reliable house but our downfall was the space the door and the next wall there was a little gap where the water could get through

3. The most challenging part was communicating with two of my teammates who were just joking around while me and another mate were planning

4. The best part about it was seeing if it passed or not and planning was very fun but also hard to do at times but we ended up not even using out whole budget

# data[].attributes.body
1.My group mainly used brick tape Lego and hard wood. It isn’t that good but it is good for the environment and the planet. But we didn’t think much of the environment because we were trying to keep Shilna.

2. I possibly think that we did beat the flood but it if up to Mr hall to see if we did.But it seems that we have to wait to see our results in the meantime.

3. my teammates but some people were absent sticking things together opening the door making sure the house actually floats and also make sure Shilna is safe

4. That is can actually worked and it was a good and fun time doing it with my friends.

# data[].attributes.body
1. My group completely disregarded the price limit when choosing materials we also didn’t use our discount on bamboo at all we weren’t very interested in not using environmental products instead we used a lot of hardwood

2. Shilna was floating on top off the water but dry I don’t think it would off counted because she wanted her books to be dry

3. The most challenging part was putting the house together since I was away one day I had no idea what the rest off the teem had done not knowing they had gone over budget and missing a door and window

4. I enjoyed the final step off watching shilna swim in the makeshift house we had made at-least we gave shilna some swimming lessons

# data[].attributes.body
1. my group decided to do the house walls as Lego because lego is a good structure for no leaking it was hard to decide if we should use hard wood for the walls or Lego. We used glass for the roof, floor and window because we knew that water would just slide down the glass and I has no gaps for any water to come in and we used an opening and closing clay door so no water would come through the entrance.

2.yes, our house did beat the flood the door made out of clay really worked and the glass was really helpful and no water could get in it was all tightly sealed with hot glue and shilna was not a drop wet and I’m glad we hot glued the Lego because it made it a lot harder for water to get in.

3.the hardest part was probably making all the sizing the same size and hot glueing them all together it was hard to get the door sizing a good size and putting the clay on the door entrance

4.the best part was making the house with friends and and getting to build with all sorts on materials and hot glueing everything together and the challenge was really fun.

# data[].attributes.body
My group mostly used hardwood concrete bricks and tape we built are home at the hila and we got a discount on bamboo we didn’t hurt the environment because we didn’t use much resource

Shilna didn’t survive sadly because of the gap in the building so shilna didn’t survive the flooding

the hardest part of the stem project was the building and the coatings

the best part of the project is that i could spend lots of time with my friends

# data[].attributes.body
1. We have used about 2-5 leaves to take advantage of their water proof shields, we also used 1 sheet of glass so we can see ‘shilna’ more better and make more accurate predictions and summaries of what will happen.

We have also used 1 piece of a Glue Tube so we can easily fit stuff together and eventually stop the house from flooding. The team has chosen High land for the high land level so we can get away from the flood to not risk the house from flooding. We used corrugated iron for the roof since it is also a very protective material for lots of roofs across flooding countries and farm sheds.

Lastly we used Hard Wood for the walls as it is also very protective and can probably suck up water.

2. As a Notice I was away for 1 week and missed out on a lot of the lesson and the testing and the building and also the ideas but if I was the I would use bamboo since we have a discount and used the Village Hila the Hila Homes. And I would have used more strong materials, and put concrete in between the gaps of the bamboo to stop flooding, dirt as a platform would also be perfect since it would be a big platform to stop the flood from getting inside the household.

3. Even though we have used 280$ and over the budget I say cook the books and it’s all okay, on the other hand we have survived since the house has good protection and good materials and also was high level on the ground.

4. I enjoyed this project even though I was away for 1 week I loved the experimentation and this whole lesson was very good and if I had the chance to do it 100 more times I would do it again.

# data[].attributes.body
1. My group thought that we should choose a place on the map that had an advantage of wood, we had a 20% discount on wood because we choose to be in the south west of the island which would be the Savuvi.

2.I personally think that we didn’t succeeded because shilna had expanded on one side of her body due to not being on a higher ground level and not having a secure door.

3.I found it hard to work with my teammates especially with one of them who didn’t listen to me and wouldn’t take in my ideas.

4. I think that testing the house was the most fun thing in the stem project.

# data[].attributes.body
1. My group and I selected the materials that we thought would have buoyancy while also selecting materials that were able to withstand an amount of force. Wood was a readily available material for the area that we chose so we used wood in our build quite often. We also used bricks as we thought the air in them would make it float while being sturdy.

2. I believe that my teams house was not successful as the floating mechanic did not work and Shilna became quite wet. I also believe that there were a few good things in the build like the roof which kept out water efficiently and the walls also kept water out. If we had a better door or the floating mechanic worked I think we would have succeeded.

3. I found the glue gun hard as I burnt myself multiple times while glueing the materials together.

4. I believe that my absolute favourite part of the build was the roof as it proved effective when keeping out water. Another thing is the bricks. Although they didn’t float they were effective at keeping water out.

# data[].attributes.body
1. My group and I thought tough, nice and strong materials and mostly picked the materials making sure it’s not over our budget and making sure it is a safe material so Shilna did not get wet, we did Lego bricks, clay, hard plastic also known as “glass”, randomly putted clay pieces on top, and some leafs at the top covering the hard plastic that was our roof.

2. Our house had beaten the flood and the evidence is Shilna did not get wet because our door was made out of clay so then you can open and close it which led the water not going in the house, the roof was protected by the leaves and random pieces of the clay.

3. The bricks because it took a lot of our time and making sure it was not over the maximum height or size and not the minimum height or size and it wasn’t that strong and it was small pieces.

4. Making sure Shilna was safe and sound while watching in horror seeing the water touching the house.

# data[].attributes.body
1.My group used the materials of, glass , tape,   bamboo , and hot glue , we got a discount on bamboo. Are most frequently used materials was hot glue.We built the hila house.

2.unfortunately,my groups house did not beat the flood because we didn’t have enough money for the high ground but instead we could only afford the medium.

3. The most challenging thing about building the house was the amount of hot glue and trying to make it float.

4. The most interesting part was watching how the houses floated,talking to my friends about it and participating in the project

# data[].attributes.body
1. My group considered the materials based on the amount of a budget we had and how we were going to use the materials. The island we chose was located at Milma and got a discount of 20% off of wood which helped us build a sturdy roof to block out excess water. The consideration between multiple materials which were chosen were Lego bricks, clay ,leafs ,pop-sticks, plastic, and hot glue. The hot glue helped benefit our house with flat hard plastic for the base of the house with Lego bricks for the walls and hard wood for the roof.

2. My group bet the flood because of the compressed surrounding of the small house , which helped a small closed space with a small door that fit Shilna in a tight surrounding ,which helped Shilna not to get wet and survived because of the beneficial door made out of clay that tightened the house. The roof supported the house by the leafs and clay because of the balance of each side.Which made the roof balance each side when the water was tipped.

3. The hardest part of the project was time and consideration of materials (budget). Strategising bricks were very challenging because of the amount of a budget and bricks we had to use for the exterior and interior. Time was another very challenging part of the project because of lots of other students using hot glue guns for a very long period of time and we had to wait for a very long while.

4. The best part of the project was planning all our ideas together and combining them into a very beneficial house which succeeded.

# data[].attributes.body
1.We chose the village of Hila 2. We chose to use these materials: leaves, glass, glue land(high), corrugated iron and hard wood hard.

2. Yes, unfortunately we didn’t have door, but luckily Shilna survived, so we basically passed.

3. Our budget was $80 more than $200. We tried our hardest, but we could have done better and use bamboo because we used To much wood which wasn’t our $20 discount.

# data[].attributes.body
1. The materials my group used were hard wood, glass, bamboo, hot glue and tape. We got an environment discount on bamboo since we built on The Hilta village. Our house was made of a lot bamboo and hard wood, which is one of the environmental materials.

2. Unfortunately, our house did not beat the flood. We did not add stilts and due to not having lots of money left we used the medium instead of the high template, and Shilna ( our sodium polyacylate) did not survive and turned into slushna.

3. The most challenging part for my group was spending all the money, wasting all the materials and having not enough time to improve our design.

4. The best part about our project was probably experiencing our house getting flooded and building the house and most of all experiencing the stem project

# data[].attributes.body
1. Our group materials were, such as, glass, bamboo, hot glue and tape. most frequently we used hot glue. Our hilta house didn’t survive but we tried to consider small amount of money.

2. Sadly no, our group house did not beat the flood the house got two wet at the bottom and it made Shilna

drown. We didn’t have enough money for the bottom.

3. The most challenging part was staying in our budget for the house so we wouldn’t go over the budget.

4. The most best part was how the house floated and cutting and gluing it together it was fun.

# data[].attributes.body
1. How my group and I decided on which materials to use, was we went to the board and felt all the materials to see which ones would benefit us the most with building our house. The island community we chose was The Milma, we decided to chose the Milma because we thought it would be the safest place to go, even though it didn’t really matter in the end. Because we used the Milma we were able to get a 20 percent discount on wood.

2. Fortunately our house did survive the flood, I think that our house survived the flood because of the materials we decided to use, I think this because overall the materials we use benefited our house in the flood in multiple ways. Because of the glass and Lego Shilna was able to stay protected and have a roof and walls. And because we had leafs and clay we were able to have a safe door and have extra protection on the roof.

3. I think the hardest part of this project is that we had limited materials and a $220 budget.