# data[].attributes.body
1.Bobbin winder

4. Upper tension control dial

6. Thread take-up lever

9. Operation buttons

10. Operation panel

11.Hand wheel

14. Foot controller jack/socket

16. Presser foot lever/ lifter

17. Foot controller

18. Presser foot lever/ lifte

19. Presser foot holder

20.Presser foot clamp screw

21.Needle

22.Presser foot

# data[].attributes.body
1.Bobbin winder

4. Upper tension control dial

6. Thread take-up lever

9. Operation buttons

10. Operation panel

11.Hand wheel

14. Foot controller jack/socket

16. Presser foot lever/ lifter

17. Foot controller

18. Presser foot lever/ lifte

19. Presser foot holder

20. Presser foot clamp screw

21.Needle

22.Presser foot

# data[].attributes.body
1A

1.Bobbin winder

4.Upper tension control dial

6.Thread take-up lever

9.Operation buttons

10.Operation panel

11.Hand wheel

14.Foot controller jack/socket

16.Presser foot lever

17.Foot  controller

18.Presser foot lever/ lifter

19. Presser foot holder

20. Presser foot clamp screw

21. Needle

22. Presser foot

# data[].attributes.body
1. Bobbin winder
4. Upper tension control dial
6. Thread take-up lever
9. Operation buttons
10. Operation panel
11. Hand wheel
14. Foot controller jack/ socket
16. Presser foot lever/ lifter
17. Foot controller
18. Presser foot lever/ lifter
19. Presser foot holder
20. Presser foot clamp screw
21. Needle
22. Presser foot

# data[].attributes.body
1.Bobbin winder

4. Upper tension control dial

6. Thread take-up lever

9. Operation buttons

10. Operation panel

11.Hand wheel

14. Foot controller jack/socket

16. Presser foot lever/ lifter

17. Foot controller

18. Knee lifter

19. Presser foot holder

20.Presser foot clamp screw

21.Needle

22.Presser foot

# data[].attributes.body
1-F: Foot controller jack/socket is on the right side of the machine where the foot controller is plugged into.

2- G: The main purpose of hand wheel is to be able to slowly turn the needle by hand
3-B: You can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial.
4- C: stitch length dial allows you to adjust the length of your stitches.
5-A: Reverse stitch lever or button that, when pressed, allows machine to stitch backwards
6- D: Thread take-up lever feeds thread from spool to needle as it moves up and down.
7- E: The presser foot is installed onto the presser foot holder
8- H: The feed dog are under the presser foot and feed the fabric in the sewing direction.

# data[].attributes.body
Member:
Hoàng Lan Anh
Phạm Thị Lan Anh
Vũ Thị Vân Anh
Trương Thị Duyên

1A:
1: bobbin winder
4: upper tension control dial
6: thread take-up lever
9: operation buttons
10: operation panel
11: hand wheel
14: foot controller jack/ socket
16: presser foot lever/ lifter
17: foot controller
18: needle
19: presser foot holder
20: presser foot clamp screw
21: needle
22: presser foot

# data[].attributes.body
1.F.Foot controller jack/socket is on the right side of the machine where the foot controller is plugged into.
2.G. The main purpose of hand wheel is to be able to slowly turn the needle by hand.
3.B.You can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial.
4.C. Stitch length dial allows you to adjust the length of your stitches.
5.A.Reverse stitch lever or button that, when pressed, allows machine to stitch backwards.
6.D.Thread take-up lever feeds thread from spool to needle as it moves up and down.
7.EThe presser foot is installed onto the presser foot holder.
8.H.The feed dog are under the presser foot and feed the fabric in the sewing direction.

# data[].attributes.body
1- F: Foot controller jack/socket is on the right side of the machine where the foot controller is plugged into.

2- G: The main purpose of hand wheel is to be able to slowly turn the needle by hand
3-B: You can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial.
4- C: stitch length dial allows you to adjust the length of your stitches.
5-A: Reverse stitch lever or button that, when pressed, allows machine to stitch backwards
6- D: Thread take-up lever feeds thread from spool to needle as it moves up and down.
7- E: The presser foot is installed onto the presser foot holder
8- H: The feed dog are under the presser foot and feed the fabric in the sewing direction.

# data[].attributes.body
1. bobbin winder
4. upper tension control dial
6. thread take up lever
9. operation buttons
10. operation panel
11. hand wheel
14. foot controller jack/socket
16. presser foot lever/lifter
17. foot controlle
18. knee Splitter
19. presser foot holder
20. presser foot clamp screw
21. needle
22. presser foot

# data[].attributes.body
1F. Foot controller jack/socket is on the right side of the machine where the foot controller is plugged into.

2G. The main purpose of hand wheel is to be able to slowly turn the needle by hand.

3B. You can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial.

4C. Stitch length dial allows you to adjust the length of your stitches.

5A. Reverse stitch lever or button that, when pressed, allows machine to stitch backwards.

6D. Thread take-up lever feeds thread from spool to needle as it moves up and down.

7E.The presser foot is installed onto the presser foot holder.

8H. The feed dog are under the presser foot and feed the fabric in the sewing direction.

# data[].attributes.body
member:
hoàng lan anh
phạm lan anh
vũ thị vân anh
trương thị duyên

3A:
1. Foot controller jack/ socket is on the right side of the machine where the foot controller is plugged

2.  The main purpose of  hand wheel is to be able to slowly turn the needle by hand.

3. You can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial

4. . Stitch length dial  allows you to adjust the length of your stitches

5. Reverse stitch lever or button that, when pressed, allows machine to stitch backwards

6. . Thread take-up lever feeds thread from spool to needle as it moves up and down

7 . The presser foot is installed onto the presser foot holder

8. The feed dog are under the presser foot and feed the fabric in the sewing direction

# data[].attributes.body
1. Bobbin winder
4. Upper tension control dial
6. Thread take-up lever
9. Operation buttons
10. Operation panel
11. Hand wheel
14. Foot controller jack/ socket
16. Presser foot lever/ lifter
17. Foot controller
18. Presser foot lever/ lifter
19. Presser foot holder
20. Presser foot clamp screw
21. Needle
22. Presser foot

# data[].attributes.body
1- F: Foot controller jack/socket is on the right side of the machine where the foot controller is plugged into.

2- G: The main purpose of hand wheel is to be able to slowly turn the needle by hand
3-B: You can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial.
4- C: stitch length dial allows you to adjust the length of your stitches.
5-A: Reverse stitch lever or button that, when pressed, allows machine to stitch backwards
6- D: Thread take-up lever feeds thread from spool to needle as it moves up and down.
7- E: The presser foot is installed onto the presser foot holder
8- H: The feed dog are under the presser foot and feed the fabric in the sewing direction.

# data[].attributes.body
1. Foot controller jack/socket is on the right side of the machine where the foot controller is plugged into.

2.  The main purpose of hand wheel is to be able to slowly turn the needle by hand.

3. You can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial.

4. . Stitch length dial allows you to adjust the length of your stitches.

5. Reverse stitch lever or button that, when pressed, allows machine to stitch backwards.

6. Thread take-up lever feeds thread from spool to needle as it moves up and down.

7. The presser foot is installed onto the presser foot holder.

8. The feed dog are under the presser foot and feed the fabric in the sewing direction.

# data[].attributes.body
A: Nice to meet you, Huyen.
B: Nice to meet you too, Huyen. I am a new colleague. I don’t know how to get a sewing machine started.
Excuse me. Can you help me?
A: yes. of course.
B: can you show me how to operate a sewing machine?
A: ok. first of all, put the cord into the socket.then press the main power switch.
B: oh. I got it.
A: after that, presser foot controller  plug into its jack on the rear side of machine and select the type of stitch and select the desired sewing speed.
B: oh. what is the next step?
A: umm.After that, you need to raise and lower the presser foot by knee lifter.
B: I agree.
A: next, you should turn off the device when the machine is not in use.
B: ok. So when the machine is not working, what should I do.
A: you need to check the switch and socket.
B: I understand. Thank you for helping me.
A: nothing. You are welcome.

# data[].attributes.body
A Hey you, I’m looking for you
B: Hello, What’s up?
A :Can I ask you for some sewing machine parts?
B: OK. No problem.
A: What is the first part?
B: This is thread take up lever
A: What is its function?
B: Uh .It feed thread from spool to the needle as its move up and down.
A: What is the name of the part number 2?
B : It’s reverse stitch lever
A: What is it function?
B: reverse stitch lever of button that’s, when pressed, allows machine to stitch backward.
A: all right. What is the third part?
B i think it is upper tension control dial
A : you could be right. What is it function ?
B : in my opionion, it adjusts the tension of your thread depending on the type of fabric.
A : Ok. What is the name of the part number 4?
B: it is hand wheel
A: what is it function?
B: i think the main purpose of the hand wheel is to be able to slowly turn the needle by hand
A: That’s true. Is this 5th part a stitch selection dial?
B: Oh Exactly.What is it function?
A: It is helps you choose the type of the stitch such as: a straight or a zigzag stitch
B: I agree. What is the six part?
A Uh. I don’t know. so what is it?
B: It’s stitch length dial and allows you to adjust the length of your stitches.
A WOW. What is the name of the part number 6?
B: this is needle clap screw.it holds the presser foot holder in place.
A uh. what about this last number?
B oh i think it is presser foot
A: what is the function of the presser foot?
B ok. it applies pressure consistently on the fabric as sewing takes places.
A : thank for your infomation .
B: No problem. See you again.
A ok bye.

# data[].attributes.body
B: Good morning, I am a new worker. Today is my first day at work.
A: Hi, I am the technician
B. Nice to meet you . Excuse me! Can you help me?
A: Of course
B: I don't know how to start the sewing machine. can you help me
A: ok. you need to power on the sewing machine by plugging the jack of the sewing machine into the electrical box and then pressing the sewing machine start button to be able to use it.
B: oh! that's how is it. I understood how to start
A: First, how to raise the propeller we use our knees to push the presser foot lifter to the right and return the foot to the original position to lower the propeller.
B: yes, i got it, it's easier than i thought. What is next step?
A: in addition, the sewing speed depends on the force applied to the foot control unit and after proper adjustment, sewing can be started.
B: ok. I understand what you said. it's really interesting.
A: When you are not using the machine, you should clean the things on the table and then turn off the power button and go out
B: yes, i see and thanks for your sharing
A: thank you, it's okay

# data[].attributes.body
To operate the sewing machine, perform the following steps. first of all, put the cord into the socket.then press the main power switch. the next step is to wrap the thread in the bobbin. Carefully insert the bobbin onto the bobbin winder so that the hole on the side of the bobbin and the small protruding pin of the bobbin spool fit together.after that, presser foot controller  plug into its jack on the rear side of machine. next, select the type of stitch and select the desired sewing speed. following, turn the hand wheel towards you to lift the needle up. don't forget to lower the press foot by using the lever on the back sewing machine.finally, press the foot controller to start sewing. Safety rules when using the sewing machine: Keep your finger away from the needle. Turn off the power while threading the machine, and do not put your fingers underneath while sewing. You should not sew on top of the fabric stapler as it will weaken the seam and possibly break the needle. Always clean and maintain the machine regularly.

# data[].attributes.body
Task 1:
I-C
II-F
III-B
IV-E
V-D
VI-C
VII-A
VIII-B
Task 2:
1: T
2: F
3: F
4: F
5: T

# data[].attributes.body
B: excuse me, would you mind if  I ask you some question about sewing machine?
A: No problem
B: I don’t know how to get a sewing machine start? Could you give me a favour?
A: first to power the machine, you must put the cord into the socket. Next you insert the foot controller plug into its jack on the rear side of the machine. Then, let set the main power switch to “I”.
B: OK. I got it
A: To raise and lower the presser foot you can use the  lever on the back of the sewing machine
B: What is the next step?
A:  To select the sewing machine and type of stitch you can use the stitch selection/length dial. After that you turn the hand wheel towards you to lift the needle up. And finally, you press the foot controller to start sewing.
B: I see that. What I have to  do next step?
A: that’s all. After you sew your cloths, you should turn off the machine...
B: It seems easy to do, I will try. Thanks for your help.
A: your welcome

# data[].attributes.body
Student A: Excuse me. I am a new employee. I am having some problems with this sewing machine. Can you help me?
Student B: Yes, of course. Tell me the problem you have
Student A: I don’t know how to power the machine. What should I do?
Student B: All sewing machines will have an on/off switch and electrical cord, usually at the back of the machine, to supply electricity to the machine. You just need to plug the power cord into an electrical socket
Student A: Oh. I see. Does the sewing machine allow to select the type of stitch?
Student B: Yes. you can select the type of stitch. Most sewing machines allow you to select from a number of different stitch types-from straight stitch to zig-zag stitch.
Student A: All right. What about bobbin winder?
Student B:  A bobbin is a second spool of thread for your machine that goes in a little compartment underneath your needle. Your machine will have an arrow showing which way the bobbin should be placed to unspool correctly.
Student A: Great. How about pressing the foot controller to start sewing?
Student B: When you press the foot pedal, the needle will begin stitching—press harder to speed it up, or slower to go slowly and carefully.
Student A: Your information is very helpful. Thank you so much
Student B: You’re welcome.

# data[].attributes.body
task 1
I- C
II - F
III - B
IV - E
V - D
VI - C
VII - A
VIII- B
Task 2
1. T ( Câu đầu tiên đoạn B: The most likely ...the machine needle)
2. F ( đoạn văn B câu 2 của đoạn 2: that machine needle ... a straight pin)
3. F (đoạn văn C câu 2 đoạn 2: remember to always ... presser foot up)
4. F ( đoạn E câu cuối: turning them to ... the spring)
5. T ( đoạn F câu 2: we shorten the life maintaining it)

# data[].attributes.body
B: Hello. Nice to meet you

A: Hi.

B: Excuse me, Is this the technical department?

A: Yes, it is. Can I help you?

B: I’m a new member here and I don’t know how to get a sewing machine start. Could you help me solve that problem?

A: Yes, of course. First and foremost, you need to put the cord into the socket. Next, you press the main power switch.

B: Ok, what do I need to do next?

A: After that, you lower the presser foot by using the lever on the back of the sewing machine.

B: What do I do next?

A: Then you select the desired sewing speed, and start sewing.

B: Ok, thank you for your help.

A: You’re welcome.

# data[].attributes.body
TASK 1:
I. C
II. F
III. B
IV. E
V. D
VI. C
VII. A
VIII. B
TASK 2:
1. T
2. F
3. F
4. F
5. T

# data[].attributes.body
Task 1:
I. C
II. F
III. B
IV. E
V. D
VI. C
VII. A
VIII. B
Task 2:
1. T
2. F
3. F
4. F
5. T

# data[].attributes.body
Sewing machines are one of the most important and necessary instruments for sewers. I'll show you how to use a sewing machine  because I'm a tailor. By plugging the sewing machine's cord into a 220V outlet, we will use direct power. The frist step is winding: Raise the spool holder and place the bobbin on it. The thread is held in the right hand, and the thread is connected through the thread reference hook using the left hand. Then, from the inside out, thread the end of the thread into the little hole in the bobbin. Finally, put the bobbin on the bobbin spool and turn it clockwise until the indentations fit into the bobbin's groove. Start the machine and keep pressing the button and bobbin until the bobbin is filled. The second step is continue on to the lower and higher threads. Last but not least, we are begin stitching. The sewing machine is simple to operate. You use sewing machine safely and use it to make beautiful outfits.

# data[].attributes.body
B: Excuse me, i’am a new a colleague. I don’t know how to get a sewing machine start. Can you help me?

A: yes, of couse. What problem are you facing?

B: What do I need to do to use the sewing machine?

A: OK.  you need to plug the power plug into the socket to supply power to the machine, then you press the sewing machine start button to be able to use it.

B: uh, I got it. So what do I need to start sewing?

A: First, put your knee on the knee lever and then gently push to the right to raise the presser foot and release to lower the presser foot.

B: I understand right now. What is the next step?

A: Next, you must to use foot control to adjust the sewing speed. Sewing speed is fast or slow depending on the pressure of the foot to the hand wheel, sewing can be started.

B: umm, that good. what should I pay attention to after sewing?

A: when the machine is not in use, you need to turn off the machine and and unplug it from the socket. You should clean the machine regularly to make it last longer.

B: You have really been helpful. Thank you very much.

A: Nothing!

# data[].attributes.body
A: hello, can you help me?

B: Yes, what problem are you having?

A: My sewing machine has a broken needle.

B: Oh, I see. Fixing it is very simple: first, lift the presser foot lifter or lever on the back of the machine up to raise the presser foot and turn the hand wheel counterclockwise or towards you to raise needle to the highest position.

A: Yes, what is the next steps?

B: Then, you need to use the screwdriver to loosen the needle clamp screw by turning it counterclockwise.

A: So what should I do after that?

B: Now, remove the broken needle and replace it with a new one. Turn the needle the needle clamp screw clockwise to tighten it.

A: oh, it's so easy, thanks for your help

B: No problem.

# data[].attributes.body
5A
task 1
8- 7-1-3-6-5-4-2
Task 2
1.T
2.T
3.F
4.F
5.T

# data[].attributes.body
B: Excuse me, I don't know how to use a sewing machine. I want to learn sewing machines before studying at school. Can you help me, please?

A: Ok, let me know what you need help

B: first, how can I start the sewing machine?

A: first, to power the machine, let's plug the jack of the sewing machine into the electrical box and then press the sewing machine start button to be able to use it.

B: yes, I understand

A: the presser foot is the lever located to the right or behind the needle mechanism. To adjust the presser foot, you either raise it fully or lower it completely.

B: ok, I can see

A: To select the type of stitch, don’t forget to use the stitch selection and the stitch length dial. After that, you turn the handwheel towards to raise the needle, put the fabric on the feet dog, then lower the presser foot. finally, you press the foot controller to start sewing.

B: Wow, that's so great

A: yes, it's not hard. You should keep the sewing machine clean and take care of the sewing machine to prevent insects from damaging the power line

B: thanks for your information.

A: That's all right!

# data[].attributes.body
A: Hey Lan Anh. what are you doing?

B: Oh! I’m doing my homework learning about sewing machine.

A: Uhm! I know many things about sewing machines. So do you need any hepls?

B: That’s great. I’m having a hard time identyfying its parts and functions.

Can you talk some information about part 1?

A: Yes of couse, Part 1 is the thread take- up lever, it feeds thread from spool to needle as it moves up and down.

B: Ok. What’s this part 2?

A: It is the reverse stitch lever, its function is allows machine to stitch backwards.

B: oh really! So what about part 3?

A: Guess what?

B: I think it’s upper tension control dial. it helps to adjust the thread tension depending on the fabric during sewing.

A: So good!

B: The fourth part is the hand wheel right?

A: Exactly. The function of the hand wheel is to be able to slowly turn the needle by hand.

B: What is the next part?

A: This is stitch selection dial. You can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial.

B: I understand right now. What’s this part 6?

A: This is stitch length dial. It allows you to adjust the length of your stitches.

B: So what about part 7?

A: This is needle clamp screw. it helps us to screw the needle clamp to hold the presser foot in place.

B: What is the last part?

A: Presser foot. The presser foot applies pressure consistently on the fabric as the sewing takes place.

B: That is the helful information. Thank you so much

A: it’s my pleasure.

|
|   |

# data[].attributes.body
A; hello b

B; hi a. I am a new colleague. I don’t know how to get a sewing machine started. Can you help me?

A; yes. of course.

B; can you show me how to use a sewing machine?

A; at first. plug the cord into the socket. And press the main power switch to start the machine.

B; I got it

A; after that, plugs presser foot controller into the socket on the backside of the machine

B; oh. what is the next step?

A;  After that, you need to raise and lower the presser foot by knee lifter.

B; I agree.

A: and then, select the type of stitch and select the desired sewing speed to sew clothes.

B:ok right.

A; next, you should turn off the device when the machine is not in use.

b. ok. So when the machine is not working, what should I do?.

A; you need to check the switch and socket that are still active or not.

B; ok. Thank you for helping me.

A;. You are welcome.

# data[].attributes.body
A: I just bought a sewing machine like the picture but I don't know how to use it. can you show me some parts and their uses?

B:Yes, of coure

A:  what is this part?

B:  : this is a stitch selection dial

A: What is its function?

B:  You can easily choose the type of the stitch: a straight or a zigzag stitch  by using stitch selection dial

A:  what is this part?

B: this is a stitch length dial

A: What is its function?

B:  Stitch length dial allows you to adjust the length of your stitches

A:  what is this part?

B: this is a hand wheel

A: What is its function?

B:  The main purpose of the hand wheel is to be able to slowly turn the needle by hand

A:  what is this part?

B:  : this is a upper tension control dial

A: What is its function?

B:    It helps to adjust the tension of your thread depending on the type of fabric.

A:  ok. do you know what is this part?

B:  : this is a Reverse stitch lever

A: What is its function?

B:   Reverse stitch Lever or button that, when pressed, allows machine to stitch backwards

A: what is this part?

B:  : this is a Thread take-up lever

A: What is its function?

B:    Tread take-up lever feeds thread from spool to needle as it moves up and down.
A:  what is this part?

B:  : this is a presser foot

A: What is its function?

B:  It help to apply pressure consistently on the fabric as the sewing takes place.

A:  what is this part?

B:  : this is a needle clamp screw

A: What is its function?

B:   The needle clamp screw to hold the presser foot holder in place.

Ok. Thank for your information.

# data[].attributes.body
A: Hello, I’m a new colleague. I want to know some information about sewing machine. Can you help me?

B: Of course. What information do you want to know?

A: Oh, I got some problems about getting a sewing machine start. You know about it, don’t you?

B: Yes, first, you need put the cord into the socket and press the main power swith

A: I can get it

B: Second, you should insert the foot controller plug into jack on rear side of the machine

A: That’s so helpful with me. What do you do, next?

B: Then, you can select the type of stitch and the desired sewing speed

You must turn the hand wheel towards you to lift the needle up and loưer ther presser foot by using the lever on the back of the machine

And press the foot controller to start sewing

A: It really has many steps but I understool

B: Final, when you don’t use the sewing machine, you must turn off the machine by main power switch and unplug the socket

A: Thanks for your information

B: You’re welcome

# data[].attributes.body
I-C
II-F
III-B
IV-E
V-D
VI-C
VII-A
VIII-B
Task 2:
1- T
2- F
3- F
4- F
5- T

# data[].attributes.body
A: Oh! Hello. I bought a sewing machine. I don’t know how to use and I want to learn about some parts of the machine. Can you help me?

B: Of course. I learned how to use a sewing machine at my school. Which parts do you want to know?

A: What is this part?

B: This tread take-up lever

A: What is its function

B: Tread take-up lever feeds thread from spool to needle as it moves up and down

A: What is the second part and function of its?

B: This is reverse stitch lever, it is same button that, when pressed, allows machine to stitch backwards

A: This sewing machine really has many part and what is this?

B:  Oh, it’s upper tension control dial

A: What do you do with this part?

B: I use it to adjust the tension of your thread depending on the type of fabric

A: What else do the part relate to “dial”? What is the function

B: There are 2 parts

Fist, stitch length dial allows you to adjust the length of your stitches

Second, you can easily choose the type of the stitch: a straight or a zigzag stitch by using stitch selection dial

A: This part is so beautiful, what is it?

B: It’s hand wheel and the main purpose of the hand wheel is to be able to slowly turn the needle by hand

A: Thanks for your information

B: You’re welcome

# data[].attributes.body
Task 1:
I-C
II-F
III-B
IV-E
V-D
VI-C
VII-A
VIII-B
Task 2:
1: T
2: F
3: F
4: F
5: T

# data[].attributes.body
Now,i will introduce the basic step to run the sewing machine for new operators.from the first place,you put the cord into the socket and press the main power to swith .IN the next step,you need insert the foot controller plug into its jack on the rear side of the machine.Affter that,you need selectting the type of stitch. Then.you can select the desired sewing speed. Next,you have to turn the hand wheel towards you to lift the needle up.Following, you need lower the presser foot by usuing the lever on the back of the sewing machine.At the final stage,press the foot controller to start sewing.

# data[].attributes.body
Task 1:
I-C
II-F
III-B
IV-E
V-D
VI-C
VII-A
VIII-B
Task 2:
1.T 2.F 3.F 4.F 5.T

# data[].attributes.body
Now, we will give the basic steps to operate the sewing machine for new users. From the first place, remember to put the cord into the socket. Next, press the main power switch. After that, insert the foot controller plug into it's jack on the near side of the machine. Then, select the type of stitch and select the desired sewing speed. At the same time, turn the hand wheel to wards you to lift the needle up. The next step, lower the presser foot by using the lever on the back of the sewing machine. Finally, press the foot controller to start sewing. So we have introduced the steps of operating the sewing machine and we hope that the information will be helpful for the new users.

# data[].attributes.body
broken needle : 3-4-1-2
thread bunching :  3-4-1-2
wind the bobin : 3-1-5-2-6-4

# data[].attributes.body
broken needle : 3-4-1-2
thread bunching :  3-4-2-1
wind the bobin : 1-3-2-6-4-5

# data[].attributes.body
Broken needle : 3-4-1-2
Thread bunching :  3-4-1-2
Wind the bobin : 3-5-2-1-6-4

# data[].attributes.body
broken needle: 3-4-1-2
thread bunching: 3-4-1-2
wind the bobbin: 3-5-2-1-6-4

# data[].attributes.body
broken needle: 3-4-1-2
thread bunching: 3-4-1-2
wind the bobbin: 3-5-2-1-6-4

# data[].attributes.body
In the following, I will talk to you about how to fix a very common problem when using a sewing machine. First,  lift the presser foot lever on the back of the machine up to raise the presser foot.Then you turn the handwheel counterclockwise to raise the needle to the highest position.  After that,  you need to use the screwdriver to loosen the needle clamp screw by turning it counterclockwise.Finally, remove the broken needle and replace it with a new one. And don't forget to turn the needle clamp screw clockwise to tighten it. From the above, I think you can guess the problem I'm talking about.

# data[].attributes.body
Sewing machine is one of the important and necessary instruments for sewer . I will show you how to spot sewing machine problems because I am a tailor. One of the most typical sewing mistakes is breaking the needle. It might be caused by a sewing machine problem or by using the incorrect needle and cloth. When sewing denim cloth with a needle with a small index, the needle will be very easy to break. The solution is simple; before sewing, you ask the teacher about the sort of needle that is appropriate for the fabric. Furthermore, you must place the broken needle in a plastic box to prevent it from remaining to the sewing cloth or falling to the ground, which would be quite unsafe to the tailor.

# data[].attributes.body
A: Hi, would you like to play a mini game?
B: yes. Of course. So what are the rules of the game?
A: In the following, I will give the steps to correct the sewing machine error. Listen and guess which common mistake it is.
B: Okay. It sounds great.
A: The first step to correcting this is to raise the presser foot lever on the back of the machine to raise the presser foot.
B: Can you give me more suggestion?
A: The next step is to turn the handwheel counterclockwise to raise the needle to the highest position.
B: the above two steps are both basic steps to fix a lot of errors. Can you have any more suggestions?
A: ok. Here is the final suggestion. you need to use the screwdriver to loosen the needle clamp screw by turning it counterclockwise.
B: This is a broken needle right? the final step to fix this is to remove the broken needle and replace it with a new one. And don't forget to turn the needle clamp screw clockwise to tighten it.
A: That's right. Give you this gift. Thank you for participating in the mini game.
B: Thanks for the gift. goodbye.

# data[].attributes.body
A: Excuse me! Can you help me?

B: Yes, of course. What is your problem?

A: The needle in my sewing machine is broken and I don’t know how to fix it.

B: Ok. Firstly, you must lift the presser foot lever on the back of the machine up to raise the presser foot.

A: Oh. I see.

B: Next, turn the hand wheel counterclockwise to raise needle to the highest position.

A: Oh, I understand right now. What else?

B: You need to use the screwdriver to loosen the needle clamp screw by turning it counterclockwise, you need a new needle?

A: umm, I got it. What’s next?

B: remove the broken needle and replace it with a new one, turn the needle clamp screw clockwise to tighten it.

A: That so good! What about thread bunching? Can you fix them?

B: Sure, it's also pretty simple

A: Oh really, can you teach me how to fix them?

B: OK. The first, lift the presser foot lifter/lever on the back of the machine up to raise the presser foot.

A: What’s next?

B: Then, you will need to raise needle to the highest position by turning the hand wheel counterclockwise

A: umm I got it. What do i need to do next?

B: Next, raise the take up lever, rethread the machine

A: Is that done?

B: No, Finally. Confirm you have the right tension on the upper thread

A: Your information is very helpful for me. Thank you so much.

B: You are welcome.

# data[].attributes.body
Broken needle 3-4-1-2
Thread bunching 3-4-1-2
Wind the bobbin 3-5-2-1-6-4

# data[].attributes.body
A: Hello, are you free?

B: What's up?

A: My sewing machine is broken needle, can you help me fix it?

B: needle broken? I have just broken needle and fixed it

A: really? What do I need to do now?

B: First, lift the presser foot lifter or lever on the back of the machine to raise the presser foot

A: After that?

B: Second, turn the handwheel counterclockwise or toward you to raise the needle to the highest position.

A: oh, So what is the third step?

B: third, you need to use a screwdriver to loosen the needle clamp screw by turning it counterclockwise.

A: Ok

B: finally, I need to do is remove the broken needle and replace it with a new one.

A: Is it correct to turn the needle clamp screw clockwise to tighten it?

B: That’s right.

A: Ok, thanks for your information.

B: Not at all.

# data[].attributes.body
A: Hi, looks like you're in trouble.  Can i help you?

B: That's right. This is the first time I've used a sewing machine. The product I sewed has no thread at the bottom of the fabric.

A: I see. The bobbin runs out of thread - there is not lower thread - wind the bobbin.

B: I don’t know. So how to do it now?

A: First, you have to thread the bobbin and push the end of the thread through the hole in your bobbin.

B: Ok. What to do next?

A: Then you have to put your bobbin on the bobbin winder and lock it. You need to hold the end of the thread that you inserted through the hole of the bobbin.

B: I understand. That's the last step, isn't it?

A: No. You need to press the foot pedal to start filling up the bobbin. And finally, when your bobbin is full with thread , cut the thread and remove the bobbin from the winder.

B: Thank you for your sharing.

A: No problem.

# data[].attributes.body
Thread bunching
First, lift the presser foot lifter on the back of the machine up to raise the presser foot.second, you need to raise needle to the highest possition by turning thế handwheel counterclockwise.then, raise the take-up lever . Rethread the machine. Confirm you have the right tension on the upper thread