# data[].attributes.body
from group 6 to group 3 nice flow chart

# data[].attributes.headline
How does energy transformation occur during the testing of your circuit prototype? (create a flow chart and list type of energy)

# data[].attributes.subject
How does energy transformation occur during the testing of your circuit prototype? (create a flow chart and list type of energy)

# data[].attributes.body
Your flow charts are right on point: ending result heat/thermal energy supports that energy is always transforming.

# data[].attributes.body
Group 6

# data[].attributes.headline
Recommendation for Group 6 from Group 4 

# data[].attributes.subject
Recommendation for Group 6 from Group 4 

# data[].attributes.body
A recommendation for group 6 is leaving a blank line to separate the negative charge and the positive charge and putting the light bulbs in different position or positioning the legs of the light bulbs more carefully

# data[].attributes.body
Make the lines bigger and thicker to be able to provide space for the other bulbs

# data[].attributes.body
you should take out the lines and fill the tree with the pencil and leave a line in the middle without pencil

# data[].attributes.body
Group 2

# data[].attributes.body
We suggest drawing the tree bigger to be able to fit more bulbs.

# data[].attributes.body
you should make the tree bigger so more bulbs can fit

# data[].attributes.body
Group 6 before improvements

# data[].attributes.headline
Post a picture of your evergreen pine tree with lit bulbs.

# data[].attributes.subject
Post a picture of your evergreen pine tree with lit bulbs.

# data[].attributes.body
Group 6 some suggestions are that you should separate them a little bit And put the battery between each one. Some things that you shouldn’t do is put them together. And don’t put a paper clip it doesn’t work.

# data[].attributes.body
Some improvement we can do is to make the the lines darker to have more energy emitted

# data[].attributes.body
i agree with your improvements you can also make the tree a little bigger so you can separate the bulbs

# data[].attributes.headline
List some suggestions for redesign/improvement of your circuit prototype.

# data[].attributes.subject
List some suggestions for redesign/improvement of your circuit prototype.

# data[].attributes.body
*****BE SURE NOT TO LET THE LINES TOUCH ON YOUR EVERGREEN PINE (YOU NEED A POSITIVE + LINE AND A NEGATIVE - LINE)*******

# data[].attributes.body
Reminder: graphite pencil is "GOLD" for this project

-also, remember your measurable goal: bulb lit for 10 seconds

# data[].attributes.body
making the lines darker and making sure the light bulbs are not blown up.

# data[].attributes.body
give the bulbs some time without being lit up so they don't fade out.

# data[].attributes.body
Something our group could do to improve our circuit prototype is instead of making 2 lines with a space in the middle we should divide the tree into 2 parts and completely fill them in but leave a space in the middle to divide the negative and positive battery charge

# data[].attributes.body
Group 6

We changed the position of the battery and how the tree was because we didn’t split the tree in half. Some suggestions are to split your tree in half make sure none of the pencil marks are touching and to Separate the lights.

# data[].attributes.body
We suggested that moving the battery into the center could help light up the bulbs evenly.

# data[].attributes.body
We ended up changing the placement of the battery as well as, changing the position of the light bulbs. When speaking to other classmates we learned that when placing the battery at the bottom, the bulbs at top would lose power and the bulbs at the bottom would take all of the electricity.

# data[].attributes.headline
Recommendation for Group 3 from Group 4 

# data[].attributes.subject
Recommendation for Group 3 from Group 4 

# data[].attributes.body
A recommendation for Group 3 is putting a light bulb at the beginning of the line in led because the battery charge is stronger at the beginning

# data[].attributes.body
What did you change? What recommendations did you receive from your classmates that help your group? Post a pic of your redesign.

# data[].attributes.body
we did the lines darker, bigger, and separated the lines so they don't touch

# data[].attributes.body
you should make the tree thicker because the light bulb is not gonna light up .

# data[].attributes.body
A recommendation for Group 5 is making the lines bigger and put a light bulb in the "trunk" of the tree

# data[].attributes.body
After improvements

# data[].attributes.body
very nice tree and all the light bulbs lit up

# data[].attributes.body
A recommendation for group 7 is filling in completely the 2 sides of the evergreen tree.

# data[].attributes.body
Something our group suggests is moving the battery into a place where it can consecrate on all 5 light bulbs. Such as the middle where the light bulbs are evenly placed.

# data[].attributes.body
Some suggestions for your tree is to make the lines thicker, darker, and to separate the lines a little more

# data[].attributes.body
A way you guys could improve this is making the lines thicker and darker providing more mobility for the battery to be able to moved around.

# data[].attributes.body
The electricity from the battery transferred to the led and transformed into light and heat energy.

# data[].attributes.body
thats a good explanation but i dont know what group you are

# data[].attributes.body
A recommendation for Group 2 is making the lines thicker so the battery charge can pass by easier.

# data[].attributes.body
A suggestion that we have is to not use your bulbs to much to see if they work.If they already turned on then you can stop trying to see if it works.Thats a problem we had that we burned our bulb out by trying to see if it turned on.

# data[].attributes.body
those are good suggestions more suggestions are that you should make sure the bulbs are even and you fill the tree nicely and dark

# data[].attributes.body
very nice rubbing hands flow chart it is decorated nicely to

# data[].attributes.body
flow chart is very nice and you can understand it very well

# data[].attributes.body
try to draw the tree bigger at the top so you can also light the bulb on the top of the tree

# data[].attributes.body
(only one bulb lit up for 10 seconds after improvement)

# data[].attributes.body
draw the tree bigger so more bulbs can fit on and don't make it too wide where you have to open the bulb to much

# data[].attributes.body
shade the tree darker on the top without the lines touching to ensure that the lights will turn on.

# data[].attributes.body
recommendation shade it darker and add a bulb in the middle and at the end and then the battery in the middle

# data[].attributes.body
A recommendation for group 1 is not making the top of the tree in the shape of a star and making the lines thicker

# data[].attributes.body
Make the pine tree bigger.

# data[].attributes.body
try to not put the lightbulbs on the battery so the lightbulbs don't blow up.

# data[].attributes.body
try to make the lines bigger and darker so the lightbulbs light up.

# data[].attributes.body
make sure the lines are big and dark but try not to let the lines touch.

# data[].attributes.body
try to make sure the lines don't touch.

# data[].attributes.body
try to make sure the lines don't touch.

# data[].attributes.body
try to make sure the lines aren't touching and try to make the lines a little darker.

# data[].attributes.body
Add more light bulbs. And add the plus and minus signs on the bottom of the tree

# data[].attributes.body
Your tree is to wide try to make it more thin

# data[].attributes.body
Try to make your tree bigger to fit more bulbs

# data[].attributes.body
Your tree is good size but you need to add more light bulbs

# data[].attributes.body
don't try to add to much tape and try to put the battery on the bottom of the tree

# data[].attributes.body
Make the lines thicker.

# data[].attributes.body
Make the lines around the light that didn't lit up darker.

# data[].attributes.body
Make your pine tree bigger.

# data[].attributes.body
Try to make the tree darker and add the positive and negative signs if they are not there.

# data[].attributes.body
We added more light bulbs and made the tree darker like the recommendations that the other groups gave us.