# data[].attributes.headline
Elaboración y continuación del contenido digital

# data[].attributes.subject
Elaboración y continuación del contenido digital

# data[].attributes.body
Justificación:
Este artículo investiga sensores de sudor integrados en textiles flexibles que permiten monitoreo continuo en prendas. Se detallan los materiales utilizados, su comodidad, flexibilidad, capacidad de respuesta (sensibilidad), y la integración en ropa wearable. Analiza también los principales desafíos: la durabilidad al lavar, la biocompatibilidad con la piel, la precisión en condiciones reales de uso, etc. Todo esto lo hace muy relevante para el tema de sensores de bienestar en tu ropa, porque demuestra empíricamente cómo se pueden implementar estos dispositivos en elementos de ropa comunes. PMC

Reelaboración propuesta:
Realicé un resumen comparativo con:

1. Tipos de sensores de sudor (qué biomarcadores detectan).

2. Ventajas de los textiles flexibles (comodidad, adaptabilidad al cuerpo).

3. Desventajas o retos (lavado, interferencias, mantenimiento).

4. Aplicaciones posibles: seguimiento deportivo, monitoreo de hidratación, detección de estrés.

# data[].attributes.attachment_link.readable_text
Abstract

The current physical health care system has gradually evolved into a form of virtual hospitals communicating with sensors, which can not only save time but can also diagnose a patient's physical condition in real time. Textile-based wearable sensors have recently been identified as detection platforms with high potential. They are developed for the real-time noninvasive detection of human physiological information to comprehensively analyze the health status of the human body. Sweat comprises various chemical compositions, which can be used as biomarkers to reflect the relevant information of the human physiology, thus providing references for health conditions. Combined together, textile-based sweat sensors are more flexible and comfortable than other conventional sensors, making them easily integrated into the wearable field. In this short review, the research progress of textile-based flexible sweat sensors was reviewed. Three mechanisms commonly used for textile-based sweat sensors were firstly contrasted with an introduction to their materials and preparation processes. The components of textile-based sweat sensors, which mainly consist of a sweat transportation channel and collector, a signal-selection unit, sensing elements and sensor integration and communication technologies, were reviewed. The applications of textile-based sweat sensors with different mechanisms were also presented. Finally, the existing problems and challenges of sweat sensors were summarized, which may contribute to promote their further development.

Keywords: textile, sweat sensors, sensor communication, wearable applications

1. Introduction

Traditional diagnosis based on physical hospitals shows limitations in obtaining and monitoring a patient's physical condition in real-time. It is worth noting that the present physical health care system has gradually evolved into a virtual hospital form, which is not only time-efficient but also makes real-time diagnosis of a patient's physical condition possible. With the increasing attention paid to health monitoring and the rapid development of electronic device technology, the customization of personalized wearable devices combined with personal conditions has attracted intensive interest. At present, most wearable devices are mainly used for monitoring changes in the physical conditions of the human body, such as heart rate, movement and temperature, etc., which hold limitations in reflecting the whole health status of the human body. Thus, the real-time monitoring of biological fluids such as bodily fluids, blood and interstitial fluid for physiological health evaluation has become a new trend in wearable sensors. Compared with the invasive analysis of blood components, monitoring bodily fluids (e.g., tears, saliva, sweat and interstitial fluid) as a non-invasive method is a more convenient, simple and safe way of obtaining physiological signals [ 1, 2].

Sweat is the liquid secreted by the sweat glands of the human body and is distributed in all parts of the body [ 3]. It can be continuously collected and has great potential in body fluid monitoring by wearable sensors. Sweat production is influenced by a variety of factors, such as ambient temperature, physical movement, mental state, etc. Therefore, it is possible to use the related biochemical information in sweat to identify the physical and mental health of the human body [ 4]. The main components of sweat are water and NaCl in addition to some ions (e.g., K⁺ and Ca ²⁺), metabolites (e.g., lactic acid, glucose and alcohol), etc. [ 3, 5], and is dramatically dependent on the region of generation over the body [ 6, 7]. Monitoring sweat components is one of the most important ways to adapt the physiological index in real time, which move from the bloodstream to the skin's surface through sweat, carrying a lot of physiological information in the process [ 8]. For example, changes in the Na⁺ concentration in sweat can be used as a biomarker to monitor dehydration during long-term exercise [ 9, 10], which can be an important implication for the water intake of athletes. In this way, a water and electrolyte deficit [ 6] caused by a significant loss of perspiration from heat sickness can be prevented [ 11]. Similarly, glucose changes in sweat provide a convenient way to detect blood glucose changes for diabetic patients, which is due to the correlation between the glucose concentration in the blood and the glucose concentration in the sweat [ 12]. Lactate buildup can cause soreness and fatigue in the body, and over a long period it can lead to severe illnesses such as body acidification or lactic acidosis [ 13]. Cortisol is considered to be one of the biomarkers used to monitor human mental health [ 14, 15]. As a result, for these biomarkers, various types of wearable sweat sensors in different forms have been developed in recent years, such as headbands, wristbands, underwear and electronic tattoos with improved wearing comfort and flexibility. These sweat sensors are mainly based on electrochemical, conductive and colorimetric detection. Electrochemical detection mainly includes potentiometric, amperometric and voltametric detection and has the advantages of a high detection accuracy and a fast response speed [ 16, 17]. Sensors based on conductivity changes in sweat can detect changes in sweat quantity and ion concentration, which can measure the conductance value directly or by using the electrochemical impedance spectroscopy (EIS) method. Compared with the above two methods, colorimetric detection is usually carried out based on visual observation and is easier to operate. Table 1 shows a comparison of the three different sensing mechanisms. On the other hand, the choice of materials has a great impact on the sensing mechanism of sweat sensors. For example, some natural materials are used for sweat delivery and enzyme fixation, while conductive materials are suitable for electrode preparation and detection based on electrochemical and conductive methods. The introduction of binding dyes can also enable colorimetric detection. In a word, their unique structure combined with specific materials can significantly improve the performance of sweat sensors.

Table 1.

Methods

Mechanism

Advantages

Drawbacks

Applications

Ref.

Electrochemical detection

An analytical signal is generated through a recognition element coupled with an electrochemical transducer, providing information about the analyte concentration.

High selectivity,
high accuracy and high efficiency.

Ion-selective electrodes,
two or three electrodes are required,
power is needed
calibration is required.

Ion sensing, lactate, glucose, alcohol

[ 17, 18]

Conductive detection

1. Direct measurement of the conductivity of the sensing element.

2. The content of the substance is determined based on the signal generated by the EIS converted to a conductivity value.

No need for a reference electrode.

For EIS measurement, the information needs to be transformed according to the impedance spectrum.

Sweat quantity, ion concentration, cortisol

[ 11, 15, 19]

Colorimetric detection

The content of a substance determined by the color depth of the chromogenic reaction.

Convenient andwithout external power supply

Low accuracy,
long reaction time,
contrasting colors or graphics captured by users.

pH value, lactate, glucose, alcohol

[ 20, 21, 22]

In recent years, a large number of works related to various textile-based sensors have been reported, highlighting its rapid development. Wearable sweat sensors have been developed based on textiles owing to their advantages in flexibility, light weight and low cost compared to traditional conductor materials. Textiles are composed of natural or manufactured fibers, which possess the intrinsic characteristics of breathability, durability, sustainability and flexibility, meaning that their integration into sweat sensors generates little interference with daily life. As for their role in the preparation of sweat sensors, the unique structure of textiles can be directly used for sweat transportation channels. Textiles as sensing elements support the full contact of sweat with the fabric, which helps to increase the sensitivity of the sensor. Therefore, textile-based sweat sensors have great appeal and potential for real-time medical health and fitness monitoring.

Recent studies on textile-based sensors provide a reference angle for transforming laboratory-based testing into real-time wearable sensors. In this regard, we focused on the latest textile-based sweat sensors for wearable applications in this short review ( Figure 1). Firstly, according to the material composition and component requirements of most sweat sensors, the materials and preparation processes of sweat sensors, transportation channels and collection, signal selection, sensing elements and integrating sensing with communication technologies were discussed. Next, the sensors used to detect different substances in sweat by diverse methods were briefly reviewed. Finally, we summarized the challenges and opportunities of sweat sensors to promote the further development of wearable sensors.

Figure 1.

Illustration of textile-based sweat sensor.

2. Materials and Preparation Processes of Textile-Based Sweat Sensors

Natural and functional materials processed into fibers, yarns or fabrics in various ways can be used to fabricate sweat sensors. Fibers composed of different materials can be combined and the desired properties of each material can be utilized to improve the overall performance of sweat sensors.

2.1. Materials

Natural materials including cellulose, silk, chitosan (CS), etc. have been explored as sweat sensors. These natural materials have the similar characteristics of being comfortable, breathable, flexible, unharmful and sustainable. Cellulose, as the most abundant renewable resource in nature, has been widely adopted in various forms for use in textile sensors with different structures such as fabric, yarn, etc., which can be used to collect or transport sweat [ 11, 23]. For example, cotton fabric, as a direct sweat-transport material, keeps the skin comfortable under sweating conditions because of their good wicking rate [ 11]. Unlike cellulose, silk fibroin (SF) and CS can be used to modify electrodes for the immobilization of enzymes due to their unique properties. SF is a unique protein biopolymer composed of hydrophobic and hydrophilic segments. Studies have shown that SF can immobilize enzymes and maintain the stability of the enzymes [ 24, 25, 26]. The conversion of SF into a nanofiber structure results in a high specific surface area, which can immobilize the enzyme more efficiently and promote electron transport between the enzyme and the electrode, thus improving the sensitivity of the sensor [ 24]. Furthermore, carbonized silk fabric not only has a good electrical conductivity but also exhibits an enhanced electron transfer ability, which is especially practical for non-enzymatic sensor electrode materials [ 26, 27]. CS is a kind of natural cationic polysaccharide biopolymer, which has good biocompatibility, biodegradability, hydrophilicity and antibacterial properties [ 28]. CS is often used as an immobilized substrate for enzymes, which not only helps to improve the ability of the enzyme against the action of metal ions [ 29] but also ensures facile electron transfer [ 30]. It has been reported that the combination of CS and graphene oxide (GO) as the electrode of a biosensor greatly improved the sensitivity of the sensor [ 29, 31]. In addition to using natural materials for sweat transport, they can also be processed or combined with functional materials as electrodes.

Functional materials are roughly divided into flexible and conductive materials. Among them, the selection of flexible materials for the base substrate of wearable sensors demands that the material is more suitable for human skin and can meet the requirements of human daily activities. Flexible materials such as polyurethane (PU), poly(styrene-ethylene-butadiene-styrene) (SEBS), polyethylene terephthalate (PET), polyimide (PI), ecoflex, etc., are frequently used as substrates for sweat sensor, whereas conventional conductive materials, including conductive polymers (e.g., poly(3,4-ethylenedioxythiophene) (PEDOT), polyaniline (PANI), polypyrrole (PPy)), metal (e.g., Au, Ag, Cu), metallic oxides (ZnO), carbon, etc., have high conductivity, which is ideal for use as the electrodes of sensors.

Further developing these materials into microstructural forms such as quantum dots (QDs), nanoparticles (NPs), nanowires (NWs), nanorods (NRs) and nanotubes (NTs) as the electrodes of sweat sensors can effectively improve the sensitivity of the sensors. This is because these microstructures have a larger specific surface area than traditional conductive materials, which can effectively improve the sensitivity of the sensor as a sensing element. For example, carbon QDs (CQDs) are zero-dimensional carbon-based nanoparticles (<10 nm), which have a uniquely large specific surface area, strong electrochemical responses and a high electron transfer rate. In addition, they can effectively transfer electrons to electrodes. The immobilized content of an enzyme can be significantly increased by preparing the metal material into a microstructural form [ 32]. In addition, graphene (Gr)-based materials provide binding sites for enzymes when they are used as electrodes [ 31, 33], which can effectively improve the sensitivity of the sensor [ 29], and they have great potential to be used in the field of biosensors. Among them, GO, due to the more oxygen-related functional groups on its surface, has been explored and developed for humidity-driven electric generator [ 34]. Some metallic microstructural materials such as Au, Ag, ZnO, etc., not only have a high electrical conductivity but also have antibacterial properties when integrated into wearable textiles. He et al. [ 35] reported that sweat sensors with Au nanodendrites as their electrodes have higher response signals than those with common bare Au electrodes. ZnO NRs coated on flexible carbon yarns as electrodes not only increase the surface area of the electrode, improve the hydrophilicity of the electrode and promote the rapid absorption of sweat but also bound the negatively charged enzyme on the electrode surface through the positively charged ZnO surface [ 36]. Integrating these materials into textiles by hybrid spinning, weaving, embroidery, printing or coating can effectively improve their flexibility and extend their application in flexible sensors.

2.2. Preparation Process

Textiles are used in sensors mainly in the form of fibers, yarns and fabrics. The combination of natural materials and functional materials processed into the form of textiles can effectively improve the performance of sensors.

2.2.1. Direct Transformation

The preparation of functional materials directly transformed into fiber or yarns commonly adopts techniques such as dry spinning [ 37, 38, 39], wet spinning [ 40] and electrospinning (ES) [ 41, 42], etc. The fibers or yarns are then incorporated into the fabric by weaving, embroidery or braiding [ 43]. With its simpler processing procedure compared to wet spinning, dry spinning prepares uniform and compact polymer fibers without using a coagulation bath [ 38]. Zhao et al. [ 39] successfully prepared SEBS/AuNWs fibers by dry spinning. In the preparation process, the SEBS/AuNWs were dissolved by a low-boiling-point solvent, and the AuNWs on the fiber surface effectively promoted the subsequent Au chemical deposition. For wet spinning, the polymer solution is injected into a non-solvent coagulation bath and solidifies to form continuous fibers. Zhou et al. [ 40] dispersed single-walled carbon NTs (SWCNTs) into sodium dodecyl sulfate (SDS)/poly(vinyl alcohol)(PVA) mixed solutions. Acetone was adopted as the coagulation solution in the wet spinning, which could remove the SDS surfactant. The SWCNTs were well aligned along the obtained filament axis, and the mechanical and electrical conductivity of the filament were also improved. Although these technologies have different preparation processes, they can be used to synthesize fibers by mixing different polymers.

Different from above technologies, micro/nanofibers have the advantages of a high specific surface area and porosity [ 42, 44], which can improve the sensitivity of sensors based on these materials [ 24]. Furthermore, micro/nanofibers with core-sheath, beaded, spherical and porous structures can be prepared through the ES technique, which can be utilized in sensing [ 28], wound healing [ 44], filtering and so on. The nanostructure and high porosity attributed to electrospun micro/nanofibers could provide good conformity to the skin and facilitate sweat uptake through capillary action [ 1]. In addition to fabricating micro/nanofibers into membrane structures, studies have shown that converting nanofibers into yarn structures contributes to a higher sensitivity and more sweat diffusion channels [ 45].

Apart from prepared polymer fibers, pure metallic fibers or yarns are usually directly prepared by bundle-drawing or shaving processes [ 46, 47]. The metallic yarns are then woven or embroidered into the fabric to extend its range of applications.

2.2.2. Textiles Post Treatment

The diameter distribution of directly prepared fibers is sensitive to the aggregation and agglomeration of functional materials in the solution, resulting in nonuniform diameters and distributions of fibers loaded with functional materials. This is because excessive functional materials may destroy the properties of the substrate itself when mixed with the substrate. Therefore, materials coated on various types of substrates by electrodeposition [ 39, 48], polymerization [ 49], growth [ 36], sputtering [ 1, 36], dip-coating [ 50, 51] and printing [ 52, 53], etc., can effectively solve the above problems. Electrodeposition, polymerization and the growth of functional materials on substrate materials belong to the category of chemical processes. The electrodeposition technique is used to construct a variety of electrode materials, in which thin and uniform coatings are deposited on a substrate by redox reactions in a short time. The morphology of the deposited film can be adjusted by controlling the temperature and the applied current density as well as the electrolyte composition [ 54]. Peng et al. [ 12] deposited cotton-like Au microspheres on a carbon cloth by electrodeposition, which was more conducive to electrocatalytic applications. Yang and co-workers [ 55] electrodeposited PEDOT/GOx on the surface of Pt and Pt covered by PLLA nanofibers, respectively, and found that the nanofibers with Pt covered by PLLA effectively increased the GOx content and the sensitivity of the sensor and reduced the impedance of the electrode, which could be explained by the fact that the nanostructure increased the contact area, resulting in the positively charged PLLA and negatively charged GOx being better combined.

Another approach to coating functional materials on substrates is to use physical processes such as sputtering and printing technologies, which are simpler than chemical processes. Sputtering technology can achieve the deposition of metals or complex oxides onto a substrate material, and the cost is relatively low. In addition, the most commonly used coating method is the inkjet printing or screen printing of various materials on a substrate surface, which can achieve low-cost large-batch electrode preparation with a specific pattern. Although inkjet printing is less efficient than screen printing, electrodes with two or three different materials can be fabricated simultaneously by applying the same voltage pair with a certain spacing of ink drops, which greatly saves preparation time [ 53].

However, the materials and structures of textiles will affect the coverage of the conductive substances. Possanzini et al. [ 56] used cotton, silk and polyester threads as the substrates and coated PEDOT: PSS on the surface of the substrate material and compared its resistance value. Among the samples, the resistance value of cotton as the substrate was the lowest, and the resistance value of polyester as the substrate was the highest. Chung et al. [ 1] sputtered Au on a PU nanofiber and a PU microfiber surface and found that reducing the fiber diameter could ensure more cross hotspots per unit area and promote Au adhesion.

3. Key Components of the Sweat Sensors

The methods that sweat sensors use to analyze sweat mainly consist of sweat transportation channels and collectors, signal selection units and sensing elements. Some types of sweat sensors require the accumulation of collected sweat up to a certain volume for signal selection to detect specific or multiple substances.

3.1. Sweat Transportation Channels and Collectors

The effective transportation of sweat is supposed to not only deliver sweat to the sensing area but also provide a comfortable skin environment. Then, a sweat collection device can quantify the sweat loss and sweat rate that affects the concentration of ions. In recent years, various types of microfluidic devices have been prepared to collect sweat, but their preparation processes are complex. Wearable microfluidic devices utilize biocompatible, low-modulus elastomeric (e.g., PMMA, PDMS and its derivatives) substrates to prepare sweat capture patches for the pristine capture and clean storage of sweat [ 57, 58, 59]. These type of sweat collection devices are fabricated using films and only collect the sweat produced by sweat glands in specific locations, which is less comfortable than textile-based sweat collection devices [ 60].

There are various strategies to fabricate sweat transportation channels and collectors based on textiles. For some textiles, the gaps between the fibers in the fabrics provide capillary channels where the liquid can be sucked along the thread [ 23]. For example, cotton fabrics or threads can be directly used as sweat channels [ 18, 61, 62] ( Figure 2A,B). Bae et al. [ 61] directly used cotton fabrics as capillary materials, which had excellent liquid absorption and capillary flow abilities ( Figure 2A). Cazalé et al. [ 63] prepared a transfer area and a storage area based on fibers for sweat sensors. The transfer area was made of non-woven polypropylene with a trilobal fiber structure, and the storage area was made of polyester/polyacrylate fiber, which could ensure a 300% water absorption by weight, while some other studies have also directly placed textiles near the sensing area for the real-time detection of sweat. However, the wicking behavior is bidirectional. The reason for this is that moisture can be delivered from the epidermis to the environment as well as in the opposite direction [ 64]. Therefore, coating the surface of the transport channel with a hydrophobic material opposite to the skin can prevent the sweat from evaporating. He et al. [ 65] coated PU on a cotton fabric band as a sweat transport channel, which could protect the liquid-wicking properties of the cotton fabric and avoid sweat evaporation. The average flow velocity reduced gradually from 0.32 cm s −1 to 0.13 cm s −1 as the band width changed from 4 to 8 mm. The material of the textiles has a great influence on their absorptive capacity and the evaporation rate of the liquid. For example, the absorptive capacity of textiles composed of natural fibers is greater than that of synthetic fibers [ 66].

Sweat transportation based on wetting gradients combined with the advantages of textiles and natural networks have been explored. Some Janus textiles, which imitate the asymmetric structure of a lotus leaf, have been used for sweat transportation, that is, a hydrophobic material is used on the side that touches the sweat to keep it dry, and a hydrophilic material is used on the other side to achieve the unidirectional transport of sweat to the collection device for substance detection ( Figure 2C) [ 64]. Similarly, self-pumping Janus textiles created by the ES of a hydrophobic PU nanofiber array onto a superhydrophilic microfiber network can unidirectionally and fully transport sweat from the skin to the external electrode side [ 35]. Silica NP-TPU composite nanofibers have been introduced as sheaths for improving the hydrophilicity over the superhydrophobic SEBS substrate for the in situ concentrating and collection of sweat [ 67].

Furthermore, sweat transportation and collection inspired by the water transport principle of plant roots has also been reported. For instance, Chen et al. [ 11] designed a sweat collection device with a three-layer structure. As indicated in Figure 2 D, the bottom layer adopted a fast wicking - textile material with a fractal structure, the middle layer had a flow channel as the detection area and connection and the top layer had a disk-shaped fabric reservoir. The effective combination of the three layers can be used to detect the change in sweat volume, rate and concentration.

3.2. Signal Selection Unit

Signal selectivity, as an important factor that affects the accuracy of a sensor, is the ability to resist the interference and disturbance from other substances in the detection environment. One way to eliminate the unwanted disturbance is to select the target substances that need to be detected and exclude the interference of other ions. Polyvinyl chloride (PVC) and PU have been reported to be ion-selective membranes (ISMs) [ 52, 68] or ion-sensitive field effect transistors (ISFET). The corresponding ionophore, ion exchanger, polymer matrix and plasticizer are dissolved in a specific solvent and are then dried to form an ISM [ 69]. The ISM is deposited or coated on conductive yarns or fabrics as the electrodes, which can achieve a signal response to target ions without interference from other ions [ 70]. Textiles as electrodes have a hierarchical and porous structure, which facilitates the rapid diffusion of electrolytes and the efficient transport of ions and electrons [ 71]. Another way is that certain components or structures can act to block interfering substances. The limitation of ion contamination can be eliminated by employing alkaline conditions on the electrode surface, as the OH¯ ions suppress the adsorption of Cl¯ ions to the electrode's surface [ 72]. Nanoporous polyamide (PA) membranes used as a substrate material can act as a biomolecular sieve, allowing only desirable biomolecules to travel to the sensor surface, thereby preventing interference from other factors and improving the accuracy of the sensor [ 73].

In addition to the selection of specific substances, some materials such as CNTs [ 74] and PEDOT: polystyrene sulfonate (PEDOT: PSS) [ 75, 76] can convert the charge carriers from ions to electrons, namely, ion-to-electron transducers. For example, PEDOT: PSS can convert the charge carriers from ions (e.g., Na⁺, K⁺) to electrons via the doping/de-doping of PEDOT: PSS.

3.3. Sensing Element

The selection of the material and structural design of sensing elements for sweat sensors are vital, since they have direct impacts on the sensor's sensitivity and electrical performance. The electrodes in sweat sensors, as crucial elements, especially for sweat sensors based on electrochemical methods, are mainly composed of either two-electrode systems (a working electrode (WE) and a reference electrode (RE)) or three-electrode systems (WE, RE and counter electrodes (CE)). Most sweat sensors respond to metabolites in sweat, and the principle involves the anchoring of enzymes to the WE. Therefore, the selection of the materials and structural design of the electrode has a great impact on the sensitivity and selectivity of the sensor. Traditional sweat sensors consist of screen-printed electrodes on rigid substrates such as glass or plastic. The rigid substrates restrict the flow of the capillary tube and have poor flexibility, which requires further consideration for their integration into clothing [ 43]. Incorporating conductive materials into fibers with unique structures as electrodes is beneficial for improving their flexibility. Li et al. [ 48] deposited different active materials onto CNTs, forming a coaxial structure, which could test physiological signals. Transforming Ag/AgCl into fibers as electrodes has more stable potential than commercial solid-state Ag/AgCl electrodes.

Natural materials are not conductive by themselves, but they can be used as electrodes by simple treatment or the doping of conductive substances. For example, He et al. [ 71] transformed silk fabrics into highly conductive, intrinsically nitrogen-doped, flexible and structurally maintained carbon textiles with a graphitic nanocarbon structure through thermal treatment. The treated silk fabric was used as an electrode with abundant active sites, facilitating electron transfer, the quick diffusion of electrolytes and efficient ion and electron transmission. Growing or coating conductive materials on natural threads or yarns is also an effective approach for integrating them into textiles. Smith et al. [ 77] prepared highly conductive cotton fibers as an electrode by dipping them into PEDOT: PSS ink, multi-walled CNTs (MWCNTs) and PEDOT: MWCNTs. The conductive cotton prepared by different dispersion methods had a great impact on its electrical conductivity, mechanical properties and the subsequent deposition of PANI. The PEDOT-MWCNT-coated cotton fibers showed an impressive flexibility and a high conductivity.

The structure of electrodes or the sensing area of the sensors is important for sensor performance as well. For instance, the porous structure of mesoporous carbon results in a high electron transfer rate, which interacts with the GOx enzyme with an increased surface area and enhances the sensitivity to glucose [ 72]. AuNP-modified electrodes can improve the charge transfer rate and glucose sensitivity compared to common Au electrodes [ 78]. Designed electrodes based on textile structures have larger contact areas than traditional electrodes, which effectively improves the sensitivity of these electrodes. Wang et al. [ 68] fabricated ecoflex/polytetrafluoroethylene (ecoflex/PTFE) fibers with a unilateral bead structure and then coated CNT film and AuNPs on the ecoflex/PTFE fibers as electrodes in sequence. The fabricated ion sensor had both a high stretchability and a high sensing stability due to the low strain within the bead region of fiber.

To solve the damage to electrodes caused by scratches or mechanical breaks during exercise, some interesting works have proposed the preparation of self-healing sensor electrodes [ 76, 79]. Yoon et al. [ 76] prepared a carbon fiber thread coating with a citric-acid-based supramolecular polymer, which exhibited highly sensitive and self-healable properties and could rapidly self-heal within 30 s at room temperature.

3.4. Integrating Sensing with Communication Technologies

Sweat sensors combined with communication techniques have great potential to break through traditional lab-based analysis methods and achieve stable and fast detection in dynamic situations. Sweat sensors based on electrochemical detection with multiplex sensing arrays integrated with signal transducers, conditioning, processing and Bluetooth modules for sweat analysis that transmit information from the sensors to a smartphone [ 71]. The fabricated sweat sensors can simultaneously track six biomarkers in the sweat of the user (while in motion) in real time ( Figure 3A). Ghoorchian et al. [ 87] prepared a sweat sensor based on potentiometric detection, which was combined with a readout circuit to transmit the signals to a tablet in real time ( Figure 3B). The readout circuit contained an Arduino Pro Mini, an Arduino Voltage Sensor Module, a DC Boost converter, a Bluetooth module and a 9 V battery. The sensor measured the conductivity changes in the sweat by the EIS method. It has also been reported that a digital-to-analog converter was used to generate a sine wave to the sensor, and the impedance was calculated by measuring the amplitude and phase shift of the wave at the other end of the sensor. Then, the measured data was converted into a digital code [ 11]. Liu et al. [ 59] combined an oscillator, a sweat sensor based on EIS measurement and a microcontroller with a Bluetooth transceiver on PCB to form a wearable sensor, which could transmit data to a phone and then convert these data into conductivity values.

Sweat sensor based on colorimetric detection can also achieve real-time and continuous detection. In addition to the colorimetric use of the naked eye, RGB values can be directly obtained, or images can be directly transmitted for color matching by communication technology [ 20, 88]. Caldara et al. [ 88] integrated color sensors with embedded processing devices and Bluetooth radios, which could realize measurement control and continuous data uploading. As shown in Figure 3C, the color sensor integrated a photodiode with the L ₂ F principle to collect the maximum reflected light from the fabric to a readout RGB value. The system was capable of detecting any color in the visible spectrum and could identify different colorimetric dyes. At the same time, combined with ultralow-power-consumption microcontroller, the sensor could effectively improve the working time.

4. Applications in Wearable Sensors

The detection and sensing of abundant substances in sweat as well as the generation of energy are considered to be very promising green wearable sensor systems. Table 2 lists the common components of sweat and their associated diagnosis applications. To detect the target substances in sweat, the commonly used methods are the electrochemical, conductive and colorimetric methods, as indicated in Table 3. In addition to testing the composition of sweat to analyze human health, recent works have proposed the use of biofuels in sweat as BFCs or to develop self-powered sensors based on sweat.

Table 2.

Components

Relative Range

Diagnosis Applications

Ref.

Average sweat rate

0.72-3.65 mg cm −2 min −1

Dehydration

[ 89]

Na⁺

10-100 mM

Heat stress, hyponatremia, cystic fibrosis

[ 17, 87, 90]

K⁺

1-24 mM

Hypokalemia, irregular heartbeat and arrhythmia

[ 45]

Cl −

10-100 mM

Hyper/hypo chloremia, cystic fibrosis

[ 62, 90, 91]

Ca ²⁺

0.2-0.7 mM

Renal disorder, hypocalcemia

[ 92]

NH ₄⁺

0.1-1 mM

Metabolic breakdown of proteins

[ 93]

Glucose

0.02-0.6 mM

Diabetes, blood glucose

[ 72, 94]

PH

4-7

Hydration, dermatitis, ichthyosis, fungal infections

[ 1, 95, 96]

4.1. Sweat-Quantity-Sensing Devices

Sweating is one way in which the body temperature is regulated [ 19]. The real-time monitoring of sweat volume or the sweat rate helps to evaluate the dehydration or abnormal sweating of athletes in high-intensity exercise and workers in extreme conditions. To achieve this, the sweat volume or rate can be directly measured by sweat transportation or collection. Li et al. [ 60] conducted plasma treatment on cotton thread to effectively improve its hydrophilicity and wicking ability, achieving a sweat delivery rate of 0.27 ± 0.03 cm/s. In addition, the effective combination of hydrophilic and hydrophobic materials to form a certain pattern can evaluate the sweat volume or rate. Zhao et al. [ 62] adopted hydrophilic cotton thread embroidered on a substrate of hydrophobic cotton fabric in the form of color blocks as microchannels and micro-reservoirs for sweat collection and detection. A total of 12.5 μL of sweat could be collected for each color block. Chen et al. [ 11] prepared a sweat collector with a capacitive sensor to determine the volume of sweat based on the capacitance value.

Sweat contains ions that make sweat conductive, and this can be used to measure an individual's perspiration quantity. Yang et al. [ 98] laser-processed a hydrophilic pattern on a superhydrophobic fabric, where the through-hole structure on the fabric allowed the fluid to pass through the fabric and be transported to the hydrophilic pattern on the surface of the fabric ( Figure 4A). As the volume of sweat increased, when the droplets reached the removal pattern, the two fabrics were connected by the sweat to form a connected/low-resistance state, so that the sweat flow rate could be monitored in real time according to the change in resistance. Cotton thread was used as the conductive thread, which could change the electrical conductivity of the woven cotton fabric by absorbing sweat. Therefore, the quantity of sweating can be evaluated based on the electrical conductivity changes of the cotton thread. Jia et al. [ 19] proposed a sweat sensor based on three conductive threads wrapped in cotton, which were woven into a stable triangular structure to detect the quantity of sweat. The conductivity between the conductive threads varied according to the amount of sweat absorbed. As shown in Figure 4 B, sensors were used to measure the sweating in the armpit and on the back during different movement states. It was found that the sweat produced in the same part had a similar variation trend under different exercise states, and the amount of sweat on the back was more than that in the armpit.

There have been several reports of prepared humidity sensors that can be used to evaluate the quantity or flow rate of sweat [ 40, 99, 100]. Salvo and co-workers first integrated sweat sensors on a textile substrate using two commercial humidity sensors placed on the fabric at different heights from the skin surface, which could evaluate the sweat rate of the human body by measuring the flow of water vapor [ 101]. In order to make a sensor completely based on textiles, some researchers fabricated a humidity sensor consisting of two parts: a moisture-sensitive material and a conductive material, and they estimated the amount of sweat by detecting the change in the resistance of the composite material. Zhou et al. [ 40] fabricated an SWCNT/PVA filament with a high hydrophobicity by the wet-spinning technique. As shown in Figure 4C, the conductive SWCNT network was adjusted by absorbing water molecules to expand the PVA molecular chains, such that it exhibited resistance changes at different relative humidity in a short response time of 40 s. Yang et al. [ 51] presented a textile-based sensor with an integrated resistance and capacitance by a simple dip-coating and sewing method. As shown in Figure 4 D, carbon particles were coated on nylon/spandex fabrics as the strain-sensing layers, endowing the elastic fabric with abilities for sensing strain, temperature and humidity changes. As the sweat was absorbed into the fabric, the distance of the carbon particles increased, resulting in a change in the fabric's electrical resistance. To distinguish multiple signal stimuli, a sandwich-formed capacitive sensor was fabricated by sewing. The addition of sweat increased the permittivity of the capacitive sensor, thus causing the capacitance value to increase. The fabricated sensor had the same tendency to sense the humidity in the sweat, and as the humidity increased, both the capacitance and resistance had a positive response.

4.2. Ion-Sensing Devices

Sweat contains a large number of micronutrients such as Na⁺, Cl −, K⁺, Ca ²⁺, etc., which endow sweat with natural, safe and reliable electrolyte properties. These ions have a tight connection to the heart rate, blood pressure, cardiovascular function, muscle contraction, enzyme activation and bone development in humans [ 45, 50]. The concentration of Na⁺ is the highest among all the ions, with a typical value of 38 mmol/L [ 88]. Therefore, changes in the Na⁺ concentration in sweat can enable the monitoring of heat stress and the detection of various diseases such as hyponatremia and cystic fibrosis, which can provide important information for clinical diagnosis [ 87].

The most-used detection method for detecting the change in ion concentration in sweat is the electrochemical method, which uses ion-selective electrodes (ISE) to detect the target ions. Kil et al. [ 102] printed serpentine-patterned Gr/ecoflex electrodes onto socks, which showed a high conductivity and stable resistance under a strain of 150%. A Na⁺-ISM was drop-cast onto this Gr/ecoflex electrode, which could exhibit an excellent response to the Na⁺ concentration under different motion states. Similar toISMs, binding ion-specific receptors is a way to detect target ions. Ghoorchian et al. [ 87] used Na 0.44MnO ₂ as the sensing material to monitor Na⁺ in sweat, which enabled the observation of a stable potentiometric response for Na⁺. Combined with a microcontroller-based circuit integrated into a headband, a wireless transceiver could be used to real-time monitor the Na⁺ during exercise activity. Ag/AgCl can also be used as an electrode to measure sweat Cl ⁻ levels directly [ 56, 103]. Possanzini et al. [ 56] coated PEDOT: PSS onto four different types of threads to enable the threads to exhibit a semiconductor behavior and then deposited Ag/AgCl onto these threads with semiconductor behaviors as specific receptors, which could respond the current of the threads with the change in the Cl − concentration without performing output signal processing or correction. In addition, AgCl exhibits a reproducible and well-defined electrochemical potential with respect to a RE, which depends on the concentration of Cl −. Mo et al. [ 45] prepared core-sheath yarns using nylon yarns as the core layer and PAN/PVP/valinomycin nanofibers as the sheath (PPVN yarns). The hydrophilic PPVN yarns were woven with hydrophobic polyester yarns to form a plain fabric so that the sweat was completely confined in the PPVN yarns, which helped to obtain a stable and accurate signal. Among them, the PPVN yarns as a specific receptor for K⁺, the valinomycin was highly selective for K⁺ and generated the corresponding potential.

Different from the above method, cotton fabrics were dipped into a mixture solution of reduced GO (rGO) and aminofullerene (C ₆₀) spheres to prepare sweat sensors with specific ion-sensing functions. The resistivity of the sensors increased with the increase in the cation's (Na⁺, K⁺, NH ₄⁺, Gd m⁺) or anion's (Cl −, I −, NO 3−, ClO ₄−) radius [ 50].

Saline concentration can be estimated from impedance measurements without ISEs. The impedance is sensitive to the saline concentration [ 11], which can be used as one of the means to detect sweat. This technique requires placing an interdigital electrode in a sensing area to detect the salt concentration based on the impedance with a frequency of 10 Hz, which shows a fast response time to abrupt changes in sweat rates or concentrations.

4.3. pH-Value-Sensing Devices

The pH value of sweat in a healthy human usually varies from 4 to 7, which has become one of the biomarkers for monitoring exercise intensity [ 1]. It has been reported that there is a relationship that exists between the pH value and the concentration of Na⁺ [ 104]. The higher the pH, the greater the concentration of Na⁺. A colorimetric approach is always used for sweat pH measurement. Screening this color change by the naked eye or via a spectrometer can enable the monitoring of sweat status in real-time during exercise. It is often valuable to use color-changing materials blended into a textile to monitor the acidity of sweat. This method involves a pH-sensitive dye and halochromic materials, which change color depending on the pH of the sweat. These materials are polyelectrolytes possessing acidic or basic groups in their structure, which will either accept or release protons depending on the environmental pH [ 105, 106].

In addition to conventional pH indicators, pH-sensitive dyes have been reported recently, including bromocresol purple (BCP), nitrazine yellow (NY), anthocyanins [ 41, 107], tricyanofuran hydrazones [ 108], a mixture of bromocresol green (BCG) and methyl orange (MO) [ 22] and so on. Most synthetic dyes are halochromic dyes, which have adverse effects on the environment and are also allergenic to humans [ 106]. Adding hydrophilic materials such as CS, cellulose, GO or porous structures of materials can boost their sensitivity and shorten their response time dramatically. Prophet et al. [ 22] deposited CS, sodium carboxymethyl cellulose (NaCMC) and dye (a mixture of MO and BCG) on cotton fabric in sequence and added CTAB to fix the dye to prevent fading caused by the interaction between the positively charged amino group of CS and the negatively charged indicator dye. The L* a* b* space model was used to quantify the color change, where the value of L* represented the brightness, while the values of a* and b* represented the distance along the red-green and blue-yellow axis, respectively. As shown in Figure 5A, the pH values between 0 and 14 could be distinguished by the different colors. Schueren et al. [ 109] blended NY into a polycaprolactone/CS solution to fabricate electrospun pH-sensitive biocompatible nanofibers. Devarayan et al. [ 41] immobilized anthocyanins onto electrospun cellulose acetate nanofibers, causing significantly difference in colors at all PH values ( Figure 5 B). Furthermore, the prepared sensors could be stable over long periods at different temperatures, and the color was reversible, meaning that the sensors could be recyclable.

Halochromic textiles have been successfully used in pH sensors and have the characteristics of durability and reversibility. Li et al. [ 88] adopted an environmentally friendly halochromic dye (litmus) with 3-glycidoxypropyltrimethoxysilanein to form hybrid sol-gel matrices to impregnate cotton fabrics that affected their protonation equilibria. As shown in Figure 5C, the 7-hydroxyphenoxazone in litmus could combine with a proton to yield the red cation HL⁺ in an acidic solution, while in basic solutions, it eliminated a proton to give the blue L⁻ species. The pH of the sol-gel-based wearable sensor fitted reasonably well with the commercial pH probe reference measurements. Yapor et al. [ 110] prepared nanofibers by incorporating 10,12-pentacosadiynoic acid (PCDA) into PU, and then PU-PCDA nanofiber composites were obtained via photopolymerization under UV irradiation,, which demonstrated excellent colorimetric responses to the presence of E. coli and changes in pH as external stimuli.

Some materials with electroactivity such as PANI, IrO ₂, etc., have a high sensitivity to PH in terms of their electrochemistry. PANI is often used to prepare pH sensors [ 48, 77, 111, 112] and shows larger zeta potential changes at different pH values due to the protonation changes on the PANI surface. Hou et al. [ 111] developed PANI and PU core-sheath fibers through coaxial ES. Using PU as the core layer could improve the mechanical properties of the sensors, and the mechanical properties and the conductivity of the sensor could be changed by adjusting the proportion of PANI and PU. As shown in Figure 5D, the PANI/PU sensor responded to different potentials at different PH values and was stable in terms of deformation, temperature and detection time and could thus be applied for sweat PH detection. Hou et al. [ 79] developed a self-healing and flexible PH sensor by coating self-healing polymers (SHP) on the surface of PANI/carbon fiber threads. The fabricated sensor had a high sensitivity and a self-healing efficiency of 97.8% within 30 s, which ensured the stability and reliability of the sensor during operation. The measured results obtained were equivalent to those generated by commercial PH meters. The functionalization of rGO fibers with ferrocene showed clear redox peaks, which displayed a linear range of pH 3-8 with a near Nernstian sensitivity of 55.4 mV pH −1 [ 38]. Similarly, IrO ₂ was electrodeposited onto a conductive Ag fabric as a WE to measure the open-circuit voltage variation in the WE vs. the Ag/AgCl RE due to the pH changes [ 95]. The fabricated sensors presented a sub-Nernstian response with a sensitivity of −47.54 mV/pH.

In addition, the pH in sweat can affect the resistance change of conductive materials, and analyzing the change in the resistance is also a simple way to evaluate the pH in sweat. Ouyang et al. [ 113] coated cellulose nanocrystals (CNC)-PPy on silk-PU blended yarns with a high conductivity. As shown in Figure 5 E, the resistance of the composite yarns had a full-range pH value response of at various states.

4.4. Glucose- and Lactate-Sensing Devices

It has been found that sweat glucose can directly reflect the blood glucose level [ 114]. Especially for diabetes patients who need to monitor their blood glucose level frequently and need targeted treatment, non-invasive monitoring is very important. Glucose is found in the concentration range of 0.02-0.6 mM in human sweat [ 72]. Monitoring lactate can prevent muscle soreness, pain and cramp during exercise [ 22, 115]. Lactate and glucose sensors are usually enzyme-based (glucose oxidase (GOx), glucose dehydrogenase (GDH) and lactate oxidase (LOx)) sensors that respond to lactate and glucose concentrations by electrochemical measurements [ 35, 71]. Therefore, a fabricated electrode is essential for lactate and glucose sensors, which can be integrated into yarns or fabric. Liu et al. [ 43] immersed carbon-coated threads in either GOx or LOx as a WE. Thread coated with Ag/AgCl ink was used for the RE. The fabricated electrodes were then embroidered on a garment to measure glucose andlactate simultaneously and produced stable electrochemical reactions. Zhao et al. [ 18] decorated the surface of a cotton thread with ZnO NWs as electrodes, which improved the surface of the electrodes. The strong electrostatic attraction of the ZnO NWs enabled the LOx to be fixed on their surface more effectively and stably. The lactate was oxidized by the Lox immobilized on the WE, generating and transporting free electrons between the WE and the RE, thus producing an electromotive force difference produced between the WE and the RE. Coating the electrode with Prussian blue (PB) resulted in a significant increase in glucose sensitivity, contributing to an improvement in the limit of detection, which can be explained the reduction in the overpotential required for amperometric detection by the PB mediator [ 116]. Elastomeric Au/SEBS fibers coated with PB/LOx and Ag were integrated into a t-shirt and served as the WE and RE, respectively, and this arrangement could maintain its high performance under a large strain of up to 100% [ 37]. However, the stability and long-term activation of the enzymes are the key issues that affecting the lifetime of the sensors. Liu et al. [ 24] processed SF into a nanofiber structure (SFNF) and cross-linked it with enzymes and glutaraldehyde to form SFNFs. Then, the SFNFs were combined with PtNPs/Gr as an electrode, which could stabilize the enzyme and facilitate electron transport between the enzymes and the electrodes. The prepared sweat sensor could achieve long-term stabilities of up to 25 h (glucose) and 23.6 h (lactate). Although enzyme-based sensors have good selectivity and high sensitivity, other factors such as the pH value, temperature, etc., will interfere with their detection and affect their accuracy [ 117].

Therefore, non-enzymatic sensors have been explored to overcome these problems during the detection of the glucose or lactate level. Several noble metals (e. g. Pt, Au) have been developed for the preparation of non-enzymatic sensors. Au structures exhibits excellent poison resistivity for the electrooxidation of glucose due to its large specific surface area and highly active binding sites on the particle surface [ 12, 118]. Cu-based glucose sensors have attracted much attention due to their low cost and easy implementation, making them suitable as non-enzymatic alternative materials for glucose sensing [ 119, 120]. This is due to the obvious redox reaction between Cu materials and glucose. Franco et al. [ 119] dipped Cu ₂O nanoclusters onto Gr paste printed on cellulose cloth as a WE. The fabricated sensors showed good sensing performance in the range from 0.1 to 1 mM glucose with a sensitivity of 182.9 ± 8.83% µA mM −1 cm −2. Metal-organic frameworks (MOFs) have been explored as non-enzymatic biosensors because of their unique catalytic activity [ 121]. The active sites of MOFs initiate a reaction between the molecules and produce sensing signals by converting oxidizing glucose into gluconolactone [ 116]. Similarly, Ppy has been coated onto the surface of MWCNTs to form core-sheath-structured NWs, which improves the electrical conductivity of MWCNTs [ 122]. Furthermore, Ppy is a P-type conducting polymer in which only anions are doped, resulting in a charge transfer. Accordingly, it can selectively detect lactate anions at specific potentials while being inert to neutral and cationic substances in human sweat.

4.5. Other Sweat-Biomarker-Sensing Devices

Cortisol is recognized as a stress hormone [ 97, 123]. The concentration of cortisol in sweat changes during human daily activities [ 97], so it is necessary to monitor the change in cortisol concentrations in real time. The textile-based sweat sensor detection of cortisol includes enzymatic and non-enzymatic methods. Some inorganic compounds such as ZnO, TiO ₂, SnO ₂, Fe ₂O ₃, MoS ₂, etc., have been reported as enzyme-based cortisol sensors [ 15, 36, 124, 125]. For example, Sekar and co-workers proposed cortisol sensors by coating Fe ₂O ₃ [ 124] and ZnO NRs [ 36] on the surface of flexible conductive carbon yarns (CCY), which exhibited a wide linear detection range and mechanical stability. In addition, ZnO NRs/CCY used as electrodes showed good biocompatibility, which could be more safely used in wearable sensors. Kinnamon et al. [ 15] used MoS ₂ nanosheets functionalized with cortisol antibodies as recognizable receptors. When cortisol was bound to the surface of the MoS ₂ nanosheets, the surface charge changed, and the change in the cortisol concentration could be obtained from the change in the impedance. Non-enzymatic sensors are mainly based on molecular imprinted polymers (MIPs) or recognizable receptors interacting with cortisol. As a kind of MIP, poly (glycidylmethacrylate-co ethylene glycol dimethacrylate) (poly (GMA-co-EGDMA)) can be used for the stable detection of cortisol [ 14, 97]. Mugo et al. [ 14] coated AuNPs@MIP@PANI@CNT/CNC onto a cotton textile substrate via layer-by-layer assembly. CNT/CNC, PANI and AuNP layers were added to improve the conductivity, while the poly (GMA-co-EGDMA) layer ensured the selective capture of the cortisol analyte for detection. When the insulating cortisol was captured and entered the textile electrode, its capacitance was reduced. The detection limit of the prepared cortisol sensor was 8.00 ng/mL.

Urea is an important marker of the status of the human kidney. Clinical studies have shown that the uric acid concentration in sweat is highly correlated with that in the blood [ 126]. The direct carbonization of PAN nanofibers can produce carbon nanofibers with an oriented graphitized layer structure, which can be directly used as a working electrode for uric acid detection and contribute to the rapid transmission of electrons [ 126]. Different carbonation temperatures will affect the accuracy of uric acid content detection. When the carbonation temperature is 1000 ℃, the uric acid molecules in sweat can be detected sensitively. A certain concentration of urease and phenol red were successively coated on a cotton thread coated with CNF and CS-GO [ 23]. When the urea in sweat came into contact with the cotton thread, it changed the PH value of the cotton thread, resulting in a significant color change.

The excessive consumption of alcohol can affect people's spirits, cause crime in the short term and affect people's physical health. About 1% of alcohol is metabolized by the liver, diffused by sweat through the skin and excreted by exocrine glands [ 127]. Some studies have demonstrated that the alcohol level in sweat can be correlated to the alcohol level in perspiration and the blood [ 128, 129, 130, 131]. Some alcohol-sensing wearable sensors have been developed for detecting alcohol including enzyme (alcohol oxidase (AOx), alcohol dehydrogenase (ADH))-based electrochemical sensors [ 129]. Biscay et al. [ 129] dropped AOx onto carbon screen-printed electrodes modified with PANI, which could continuously detect alcohol in sweat in small volumes (≤40 μL). Bhide et al. [ 73] immobilized biotinylated AOx enzymes on a ZnO/PA membrane surface, and EIS was used to record the impedance changes without being affected by interferents.

4.6. Sweat Self-Powered Batteries

Wearable electronic devices generally require a power supply to work, while the development of self-powered batteries using sweat enables signal detection without an external power supply. Recently, textile-based batteries powered by sweat, including BFCs derived from the electrochemical reactions in sweat, liquid-solid contactTENG and humidity driven electric generator, have been developed. The acquisition and conversion of these energies are environmentally friendly and sustainable, and they are promising for powering miniature electronics. The metabolites in sweat, such as glucose, lactate and alcohol, react electrocatalytically with enzymes or microbes to produce energy and are used as BFCs to sense biomarkers and power electronic devices [ 84, 85, 86]. For instance, Jeerapan et al. [ 84] developed stretchable BFCs using electrodes with serpentine patterns printed on textiles by screen printing. As shown in Figure 6A, when the anode was functionalized with GOx or LOx and was contacted with glucose or lactate to release electrons by enzyme oxidation, the maximum open circuit voltage generated was 0.44 V, and the corresponding maximum power density was 160 μW/cm ². Placing six BFCs in series at the bottom of sock could directly power six LED lights. It is worth noting that the oxidation reaction at the anode is complemented by the redox reaction at the cathode [ 86]. BFCs based on lactate in sweat have been developed into bracelets and have been successfully used to power digital wrist watches [ 132]. As shown in Figure 6B, LOx/osmium-based mediator/CNF fibers were used as an anode for lactate oxidation, and bilirubin oxidase/CNF fibers were used as a cathode for oxygen reduction. Among them, the anode was optimized by an osmium-based mediator, which effectively improved the electron transfer efficiency. Six BFCs were connected using fibers to form the bracelet, generating a voltage of 2 V, which was sufficient to power a digital wristwatch. Therefore, the materials of the cathode and anode as well as the ionic conductivity between them affect the energy output of BFCs [ 132]. Sun et al. [ 84] demonstrated a BFC powered by alcohol drinkers' perspiration. The combination of an enzymatic screen-printed electrode and a three-dimensional coralloid nitrogen-doped hierarchical micro-mesoporous carbon aerogels (NHCAs) consumed the sweat alcohol and dissolved oxygen to produce electrical bioenergy in real-time, which led to a power density of 1.9 μW cm −2 at 0.39 V.

The subtle change in environmental humidity caused by sweat evaporation is usually ignored by people, but it is of great value in developing a humidity-driven electric or piezoelectric generator combined with sweat humidity changes. Tong et al. [ 136] developed a humidity-actuator-driven piezoelectric generator (HAPG) composed of highly aligned polyvinylidene fluoride (PVDF)-PVA@dopamine (DA) core-sheath nanofibers, which showed a high sensitivity and selectivity to humidity fluctuations with excellent stability. PVA with a 50 nm thickness was coated on the surface of DA/PVDF nanofibers by vacuum filtration. When the PVA was in contact with water molecules, hydrogen bonds were spontaneously formed to cause mechanical deformation in the fibers. Therefore, mechanical energy can be effectively extracted from the fluctuation in environmental humidity and converted into electric energy, which effectively improves the sensitivity of these devices to humidity changes and avoids energy loss.

Table 3.

Analyte

Sensing Element

Substrate

Preparation Method

Detection Method

Test Range

Sensitivity

Limit of Detection

Flexible

Ref.

Lactate, Na⁺

ZnO NWs, LOx electrode, ion-selective electrode

Cotton threads

Weaving

Potentiometric

0-25 mM (lactate), 0.1-100 mM (Na⁺)

-

3.61 mM (lactate, 0.16 mM (Na⁺)

-

[ 18]

K⁺

PAN/PVP/Valinomycin-nylon sheath-core-structured yarns

Polyester yarns

Weaving

Potentiometric

1 × 10 −5-2 × 10 −1 M

34.7 mV/dec

1 × 10 −5 M

-

[ 45]

Cl −, PH

Ag/AgCl (Cl −), PEDOT: BTB (pH)

PEDOT: PSS physical deposition on cotton threads

Electrodeposition

Electrochemically gated

10-150 mM (Cl −), 4-7 (PH)

(167 ± 3) 10 −3 dec −1, (13 ± 1) 10 −3 pH unit −1

-

-

[ 56]

pH, Cl −, glucose

pH indicator, HgSO ₄/FeSO ₄(Cl −), GOx(glucose)

Dyed cotton fabric

Embroidering

Colorimetric, RGB value

4.0-9.0, 10-150 mM (chloride), 10-2000 μM (glucose)

-

10 mM, 10 μM

-

[ 62]

pH

IrO ₂

Stainless-steel mesh

Electrodeposition

Potentiometric

4-8

−47.54 mV/pH

-

Good flexible

[ 95]

Glucose

Cu ₂ O

Cellulose paper, hand printed graphene paste electrodes

Drop casting

Voltammetric

0.1 to 1 mM

182.9 µA mM −1 cm −2

52.7

-

[ 119]

Glucose

Au

Carbon cloth

Electrodeposition

Amperometric

1-2164 μM

25.391 μA mM −1 (<114μM), 20.609 μA mM −1 cm −2 (>114 μM)

0.78 μM

-

[ 12]

Lactate

PPy

MWCNT

Electrodeposition

Chronoamperometric

51 μM-27.7 mM

2.9 µA mM −1 cm −2

51 µM

-

[ 122]

Lactate

GOx PB/Au/AuNWs-SEBS

Latex rubber core yarn covered with nylon

Electrodeposition

Chronoamperometric

0-500 μM

11.7 μA mM −1 cm −2

0

200% strain

[ 39]

Cortisol

ZnO nanorods

Conductive carbon yarns

Sputtering, growth

Voltammetric

1 fg/mL ⁻¹ μg/mL

2.12 μA/(g mL −1)

0.098 fg/mL

-

[ 36]

5. Conclusions and Future Scope

Massive developments in textile-based sweat sensors have shown the great potential for traditional textiles in the field of wearable electronics. As shown, textile-based sweat sensors have unique structures, a high flexibility and good air permeability, thus giving users a better wearing experience. In this short review, we introduced several types of textile-based sweat sensors for wearable applications. The main components of textile-based sweat sensors and their roles in the sensors were investigated. Several mechanisms and functions of sweat sensors in detecting biomarkers were also briefed. The flexible combination of functional materials and textiles has made great progress in the development of sweat sensors.

Human sweating depends on race, body parts, environmental temperature, physical activity and other factors. Sweat sensors are challenging for the long-term monitoring of users who have dry skin and do not sweat easily. This means that a sweat sensor with a lower detection limit is in demand. Next, the effective combination of physical and sweat sensors helps to comprehensively reflect the human body's condition. Furthermore, the preparation of most sweat sensors is still in the laboratory testing stage, and efforts are still required to turn them into reliable commercial products. Therefore, the combination of sensing with communication and analysis technology demands more attention. The improved wireless communication range facilitates real-time and continuous signal acquisition during events such as competitions. At the same time, the integration of communication and analysis components should not affect the sensing performance and flexibility.

At present, there are several problems blocking wearable sweat sensors from being transformed into reliable commercial products. Firstly, the preparation process and material selection of the sensors lacks consideration of sustainability and environmental friendliness. In most cases, the substrate materials are synthetic materials, which can produce uncomfortable reactions and poor degradation when in long-term contact with skin. It has become a trend to develop natural materials for the preparation of wearable textile-based sweat sensors. Apart from the comfort of wearing a sweat sensor and the sensitivity of sweat detection, it is also necessary to consider whether human movement and environmental changes in the wearing process will affect the detection performance and sensitivity. Secondly, electrochemical sensors need to be calibrated repeatedly and frequently due to individual differences, making it inconvenient for public users. Next, for the preparation of non-enzymatic sensors based on electrochemical detection methods, the preparation of electrode materials with low cost, good stability and good performance is yet to be explored. Lastly, the long-term stability and durable performance of sweat sensors needs to be emphasized, since it is common that sweat sensors become unstable and inaccurate after prolonged use or being contaminated by sweat. This leads to a followed issue of the improper disposal of colorimetric sensors, showing poor environmental protection and sustainability consideration.

Author Contributions

Writing-original draft preparation and editing, J.Y.; writing-review and editing, J.L., and V.S.R.; supervision, S.R. and L.X.; project administration, D.J. All authors have read and agreed to the published version of the manuscript.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

Funding Statement

This work is supported by National Natural Science Foundation of China (Grant No. 11672198), Jiangsu Higher Education Institutions of China (Grant No. 20KJA130001) and the China Scholarship Council (CSC, 202106920043).

Footnotes

Disclaimer/Publisher's Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

References

46. Stoppa M., Chiolerio A. Performance Testing of Textiles. Woodhead Publishing; Sawston, UK: 2016. Testing and evaluation of wearable electronic textiles and assessment thereof; pp. 65-101. [Google Scholar]

54. Saha S., Das S. Chemical Solution Synthesis for Materials Design and Thin Film Device Applications. Elsevier; Amsterdam, The Netherlands: 2021. Nanomaterials in thin-film form for new-generation energy storage device applications; pp. 561-583. [Google Scholar]

105. Budd P. Comprehensive Polymer Science and Supplements. Pergamon Press; Oxford, UK: 1989. Polyelectrolytes; pp. 215-230. [Google Scholar]

Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.

Data Availability Statement

Not applicable.

Articles from Biosensors are provided here courtesy of Multidisciplinary Digital Publishing Institute (MDPI)

# data[].attributes.attachment_link.title
Flexible Textile-Based Sweat Sensors for Wearable Applications

# data[].attributes.attachment_link.description
The current physical health care system has gradually evolved into a form of virtual hospitals communicating with sensors, which can not only save time but can also diagnose a patient's physical condition in real time. Textile-based wearable sensors ...

# data[].attributes.body
Apellidos y Nombres: Villa Hinojosa Brandon Robert

Carrera: Ing. Mecánica

Curso: Gestión de la Información y del Aprendizaje.

Fecha: 11-09-2025

Sede: Universidad Continental-Huancayo

# data[].attributes.body
Titulo principal: Sensores inteligentes en la ropa para prevenir problemas de salud.

Subtitulo: “Ropa Inteligente: Tecnología Textil para Cuidar tu Salud en Tiempo Real”

# data[].attributes.body
Recurso original: Video introductorio

Interactiva: Protocolo S-E-N-S-O-R . SISTEMAS DE PAOS PARA SOLUCIONAR PROBLEMAS EN LAS PERSONAS.

1. S – Señalizar: Detectar y registrar cambios en signos vitales (ritmo cardíaco, temperatura, postura).

2. E – Evaluar: Analizar los datos para determinar nivel de riesgo o urgencia.

3. N – Notificar: Enviar alertas inmediatas al usuario, familiares o médicos si hay anomalías.

4. S – Sugerir: Ofrecer recomendaciones en tiempo real (descansar, hidratarse, consultar médico).

5. O – Optimizar: Personalizar rutinas de salud según hábitos y datos recolectados.

6. R – Reforzar: Promover cambios en el estilo de vida para prevenir problemas futuros.

# data[].attributes.body
Script para la infografía de introducción:
"Hola, soy Brandon Robert Villa Hinojosa y bienvenidos a este espacio sobre innovación tecnológica aplicada a la salud.
¿Sabían que cada año millones de personas no detectan a tiempo problemas de salud como la deshidratación, el estrés físico o el riesgo de caídas? La ropa inteligente es una respuesta innovadora a esta realidad.

Objetivo: Crear conciencia sobre cómo la integración de sensores inteligentes en prendas de vestir puede ayudarnos a:

Monitorear en tiempo real nuestra salud y condición física.

Detectar tempranamente signos de fatiga, deshidratación o estrés.

Prevenir lesiones y accidentes, especialmente en adultos mayores y deportistas.

Fomentar el uso de la tecnología para una vida más segura y saludable.

Este proyecto está basado en la fusión de textiles y tecnología avanzada, mostrando cómo un cambio en la forma de vestir ,Este proyecto está basado en el Marco DigComp 2.1, específicamente en el Área 5: Resolución de Problemas."

# data[].attributes.attachment_link.title
Infografia proyecto de investigacion formas curvas verde y azul

# data[].attributes.body
S – Señalizar: Detectar y registrar cambios en signos vitales (ritmo cardíaco, temperatura, postura). E – Evaluar: Analizar los datos para determinar el nivel de riesgo o urgencia. N – Notificar: Enviar alertas inmediatas al usuario, familiares o médicos si hay anomalías. S – Sugerir: Ofrecer recomendaciones en tiempo real (descansar, hidratarse, consultar médico). O – Optimizar: Personalizar rutinas de salud según hábitos y datos recolectados. R – Reforzar: Promover cambios en el estilo de vida para prevenir problemas futuros. © 09-11-2025 por Brandon Robert Villa Hinojosa tiene licencia Creative Commons Atribución-NoComercial-SinDerivadas 4.0 Internacional. Para ver una copia de esta licencia, visite https://creativecommons.org/licenses/by-nc-nd/4.0/

# data[].attributes.body
Gestión de Derechos de Autor

1. Video de YouTube

"Contenido embebido según los términos de servicio de YouTube"

"Uso educativo amparado en Fair Use – fragmento con fines pedagógicos"

2. Artículo Académico

"Citado bajo normas APA 7ma edición"

"Acceso mediante base de datos institucional"

3. Infografía

"Contenido bajo licencia Creative Commons CC BY 2.0"

"Atribución: TechRadar, modificado para uso educativo"

Recomendación General

Siempre revisar la licencia de cada recurso.

Usar citas y referencias según norma académica (APA/MLA).

Preferir recursos abiertos (Creative Commons, Open Access).

# data[].attributes.body
Fuente: “Smart Wearable Systems for Health Monitoring” – Sensors, Vol. 23, Nº 5 (MDPI) MDPI

Justificación:
El artículo revisa los avances recientes en sistemas de ropa inteligente equipada con sensores para monitorear señales biológicas (frecuencia cardíaca, presión arterial, movimientos anatómicos, etc.). Describe cómo se eligen materiales flexibles, estructuras con capacidad de estiramiento, integración de comunicación inalámbrica y de suministro de energía, lo que demuestra su aplicabilidad para sensores de bienestar integrados en prendas. MDPI

Reelaboración propuesta:
He sintetizado la información clave del artículo en un esquema comparativo de tipos de sensores, materiales usados, retos (comodidad, robustez, precisión) y ventajas para el uso en ropa de bienestar.

# data[].attributes.attachment_link.title
Smart Wearable Systems for Health Monitoring

# data[].attributes.attachment_link.description
Smart wearable systems for health monitoring are highly desired in personal wisdom medicine and telemedicine. These systems make the detecting, monitoring, and recording of biosignals portable, long-term, and comfortable. The development and optimization of wearable health-monitoring systems have focused on advanced materials and system integration, and the number of high-performance wearable systems has been gradually increasing in recent years. However, there are still many challenges in these fields, such as balancing the trade-off between flexibility/stretchability, sensing performance, and the robustness of systems. For this reason, more evolution is required to promote the development of wearable health-monitoring systems. In this regard, this review summarizes some representative achievements and recent progress of wearable systems for health monitoring. Meanwhile, a strategy overview is presented about selecting materials, integrating systems, and monitoring biosignals. The next generation of wearable systems for accurate, portable, continuous, and long-term health monitoring will offer more opportunities for disease diagnosis and treatment.

# data[].attributes.body
Problema Identificado: “Limitaciones en la precisión y durabilidad de sensores de bienestar integrados en prendas inteligentes”

PROBLEMA:
Uso de sensores en ropa para monitoreo de salud y bienestar.

CONTEXTO

Aumento del mercado de wearables en ropa deportiva y médica.

Necesidad de medición precisa (frecuencia cardíaca, sudor, movimiento).

Expectativa de comodidad, resistencia y confiabilidad en la vida diaria.

CAUSAS RAÍZ

1. Falta de materiales textiles altamente duraderos y lavables.

2. Dificultades en la calibración de sensores en movimiento.

3. Limitaciones de energía y conectividad en prendas inteligentes.

SOLUCIÓN PROPUESTA
Implementación de un sistema integral con 3 niveles:

Nivel 1: Selección de textiles conductivos y flexibles que soporten lavado.

Nivel 2: Incorporación de algoritmos de calibración automática para mejorar la precisión de las mediciones.

Nivel 3: Uso de módulos de energía recargables y comunicación inalámbrica de bajo consumo (ej. Bluetooth Low Energy).

# data[].attributes.attachment_link.title
Cartel vertical club de lectura infantil llamativo rosa

# data[].attributes.body
En primer lugar, los sensores de bienestar en prendas inteligentes constituyen una innovación que permite monitorear variables fisiológicas de manera continua y no invasiva. Estos dispositivos integrados en la ropa facilitan la prevención de enfermedades, el control del rendimiento físico y el fortalecimiento del autocuidado en la vida diaria.

En segundo lugar, aunque presentan un gran potencial, todavía enfrentan limitaciones relacionadas con la durabilidad de los textiles, la precisión de los datos en movimiento y la necesidad de soluciones energéticas más eficientes. La investigación reciente muestra avances en el uso de materiales flexibles, algoritmos de calibración y conectividad de bajo consumo que apuntan a superar estos retos.

En tercer lugar, este trabajo se sustentó en artículos académicos como Smart Wearable Systems for Health Monitoring (MDPI, 2023) y Flexible Textile-Based Sweat Sensors (PMC, 2023), que evidencian la relevancia de esta tecnología. De esta manera, se confirma que la ropa inteligente será una herramienta clave para el bienestar humano.