# data[].attributes.body
the camera sets the aperture first, and the camera then automatically adjusts the other settings, based on the aperture setting

# data[].attributes.body
control over the various parameters of an exposure

# data[].attributes.body
is a setting on some cameras that allows the user to set a specific aperture value

# data[].attributes.body
the user manually chooses a shutter speed setting while the camera automatically adjusts the aperture for each shot

# data[].attributes.body
enables manual control of the shutter speed, and aperture is calculated by the camera for proper exposure

# data[].attributes.body
measures the sensitivity of the image sensor

# data[].attributes.body
is the commonly-used term to describe visual distortion. Noise tends to get worse when you're shooting in low light.

# data[].attributes.body
ASA and ISO are both measurements of film speed, or sensitivity to light

# data[].attributes.body
It is an optical effect, the magnitude of which (amount of grain) depends on both the film stock and the definition at which it is observed

# data[].attributes.body
is an electronic device that converts an optical image into an electronic signal

# data[].attributes.body
A digital single-lens reflex camera is a digital camera that combines the optics and the mechanisms of a single-lens reflex camera with a digital imaging sensor, as opposed to photographic film

# data[].attributes.body
is a set of data that describes and gives information about other data

# data[].attributes.body
a small image representation of a larger image, usually intended to make it easier and faster to look at or manage a group of larger images

# data[].attributes.body
means “straight-out-of-camera” and denotes *ZERO* computer photoshop. No Bridge / Lightroom / Aperture, etc…

# data[].attributes.body
Autofocus points are what the camera uses to focus on a subject

# data[].attributes.body
is the general technique of taking several shots of the same subject using different camera settings

# data[].attributes.body
It allows to change the brightness in the camera for the shot

# data[].attributes.body
is used to alter exposure from the value selected by the camera, making photographs brighter or darker

# data[].attributes.body
In burst mode, several photographs are captured in quick succession by either pressing the shutter button or holding it down

# data[].attributes.body
is the ratio of the system's focal length to the diameter of the entrance pupil

# data[].attributes.body
is a hole or an opening through which light travels

# data[].attributes.body
is the aesthetic quality of the blur produced in the out-of-focus parts of an image produced by a lens

# data[].attributes.body
is the distance about the plane of focus where objects appear acceptably sharp in an image

# data[].attributes.body
is a measure of how strongly the system converges or diverges light

# data[].attributes.body
use to accurately balance color

# data[].attributes.body
the natural light of the day

# data[].attributes.body
comparative darkness and coolness caused by shelter from direct sunlight

# data[].attributes.body
(of the sky or weather) covered with or characterized by clouds; overcast

# data[].attributes.body
artificial lighting source (like a lamp or ceiling fixture) that emits heat and produce a “warmer” or reddish colour

# data[].attributes.body
usually tubular electric lamp having a coating of fluorescent material on its inner surface and containing mercury vapor whose bombardment

# data[].attributes.body
(of a light or something that reflects light) shine in a bright but brief, sudden, or intermittent way

# data[].attributes.body
a traditional and widely accepted way of behaving or doing something that is specific to a particular society, place, or time

# data[].attributes.body
shutter speed or exposure time is the length of time when the film or digital sensor inside the camera is exposed to light, also when a camera's shutter is open when taking a photograph

# data[].attributes.body
setting on camera shutters is a momentary-action mode that holds shutters open for as long as a photographer depresses the shutter-release button

# data[].attributes.body
is the apparent streaking of moving objects in a photograph or a sequence of frames, such as a film or animation

# data[].attributes.body
A monopod is a single pole that is used to support a camera and on the other hand a tripod is a three-legged frame that is used to stabilize a camera

# data[].attributes.body
the act of accidentally shaking a cameraduring shooting due to unsteady hands, which results in blurry images

# data[].attributes.body
are an entity as alive as the light. It is the shadows that shape the light, draw attention to the light, and integrate with the light to produce striking photographic opportunities

# data[].attributes.body
The Highlights contain the brightest tones, the Shadows contain the darkest, and the midtones contain everything in between

# data[].attributes.body
Normally it is assumed to be one of the brightest points in the image

# data[].attributes.body
a tone added to a black and white photograph in the darkroom to “warm” up the tones

# data[].attributes.body
an enhancement to GPS systems that improves accuracy

# data[].attributes.body
involves using a long-duration shutter speed to sharply capture the stationary elements of images while blurring, smearing, or obscuring the moving elements

# data[].attributes.body
is a technique whereby the frequency at which film frames are captured is much more spread out than the frequency used to view the sequence

# data[].attributes.body
is the Art Form of using handheld lights to paint and/or draw in a scene while the shutter of a camera is left open during a long exposure photograph

# data[].attributes.body
to keep a moving person or object in view or allow the film to record a panorama

# data[].attributes.body
The numbers 720 and 1080 refer to the horizontal resolution. Therefore, 720p HD camera resolution provides images that are 1280 x 720 pixels