# data[].attributes.headline
MUHAMMAD IRFAN HANAFI BIN AHMAD NIZAM (01DEE20F1105)

# data[].attributes.subject
MUHAMMAD IRFAN HANAFI BIN AHMAD NIZAM (01DEE20F1105)

# data[].attributes.body
#Making a Door Mat
1)Firstly,the lenght and the width of the coir are measured.
2)Secondly,a large piece of paper is used as a canvas.
3)Thirdly,the preferred doormat shape is drawed on the paper by using a marker pen.
4)Then,the coir is fliped over.
5)Next,the paper template flat is layed on top of coir.
6)After that,the design is traced by using a permanent marker.
7)Next,the design is cut along the lines.
8)Then,the stencil is cut out from a piece of cardboard.
9)After,the stencil is placed on the surface of the new coir mat.
10)Lastly,the stecil is sprayed paint all over.

Safety measures
1.use an apron when spray to protect cloths
2.carefully when cut a stencil to avoid accident
3.use hand glove when spray to protect our hand.

# data[].attributes.body
DOORMAT
1. Firstly, the length and the width of the coir are measured.
2.Second,a large piece of paper is used as a canvas.
3.Next, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.After that,the paper template
is laid flat on top of coir.
6.Next,the design is traced by using a permanent marker.
7.Then, the design is cut along the lines.
8.After that, a stencil is cut out from a piece of cardboard.
9.Next, the stencil is placed on the surface of the new coir mat.
10.Lastly, the paint is sprayed all over the stencil.

3 safety measures :
1. Wear an apron to avoid cloth from being exposed to paint.

2. Be careful when handling sharp tools to avoid any injuries.

3. Wear a mask to avoid inhalation of paint chemicals.

# data[].attributes.body
Making proses of Door Mat
1)In begining , the lenght and the width of the coir are measured.
2)Secondly,a large peice of paper is used as a canvas.
3)Then,the preferred doormat shape on the paper is drawn by using a maker pen.
4)Next,the coir is flipped over
5)After that,the paper template flat is laid top of coir.
6)Then,the design is traced by using a permanent maker
7)Next,the design are cut along the lines.
8)After, that a stencil is cut from a piece of cardboard.
9)Then,the stencil is placed on the new coir mat.
10)Lastly,the stencil is sparay.

# data[].attributes.body
01DEE20F1104
1.Firstly, the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas.
3.Next,the preferred doormat shape is drawn on the paper by using a marker pen.
4.After that, the coir is flipped over.
5.Then, the paper template is laid flat on top of coir.
6.Later, the design is traced by using a permanent marker.
7.Then, the design is cut along the lines.
8.Next, the stencil is cut out from a piece of cardboard.
9.After that, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over

SAFETY MEASURES:
1.Wear a glove during cutting
2.Wear a mask to avoided inhaling spray get into mouth
3.Wear an apron to avoid cloth get dirty

# data[].attributes.body
01DEE20F1089

1)Firstly,the length and the
width of the coir are measured.
2)Secondly, a large piece of paper is used as a canvas.
3)Thirdly, the preferred doormat shape on the paper is drawn by using a maker pen.
4)Fourth,the coir is flipped over
5)Next, the paper template flat is laid on top of coir.
6)Then, the design is traced by using a permanent marker
7)Subsequently,the design are cut along the lines
8)After that, a stencil is cut from a piece of cardboard.
9)Then,the stencil is placed on the surface of the new coir mat
10)Lastly,the stencil is sprayed paint all over

# data[].attributes.body
01DEE20F1103

1)Firstly, the length and the width  of the coir are measured.
2)Secondly, a large piece of paper  is used as a canvas.
3)Thirdly, the preferred doormat shape on the paper is drawn by using a maker pen.
4)After that, the coir is flipped over.
5)Next, the paper template flat is laid on top of coir.
6)  Then, the design is traced by using a permanent marker.
7)Subsequently, the design are  cut along the lines.
8) After that, a stencil is cut from a piece of cardboard.
9)Then, the stencil is placed on the surface of the new coir mat.
10) Lastly, the stencil is sprayed paint all over.

Safety measures :
1. Wear an apron to avoid cloth from being exposed to paint.

2. Be careful when handling sharp tools.

3. Wear a mask to avoid inhalation of paint chemicals while using paint spray.

# data[].attributes.headline
MUHAMMAD IQBAL HAZIQ BIN NORAZLI 01DEE20F1107

# data[].attributes.subject
MUHAMMAD IQBAL HAZIQ BIN NORAZLI 01DEE20F1107

# data[].attributes.body
#Making a Door Mat
1)Firstly,the lenght and the width of the coir are measured.
2)Secondly,a large piece of paper is used as a canvas.
3)Thirdly,the preferred doormat shape is drawn on the paper by using a marker pen.
4)Then,the coir is fliped over.
5)Next,the paper template is laid flat on top of coir.
6)After that,the design is traced by using a permanent marker.
7)Next,the design is cut along the lines.
8)Then,the stencil is cut out from a piece of cardboard.
9)After,the stencil is placed on the surface of the new coir mat.
10)Lastly,the stecil is sprayed paint all over.

#Safety measures :-
1)Wear safety gloves to avoid our hand from paint.
2)Wear mask to avoid from inhale dust.
3)Wear glasses to avoid dust from get into our eyes.

# data[].attributes.body
1.Firstly,the length and the width of the coir are measured.
2.Next,a large piece of paper is used as a canvas.
3.Then,the preferred doormat shape is drawn on the paper by using a marker pen.
4.After that.the coir ia flipped over.
5.Subsequently,the paper template flad is laid on top of coir.
6.Next,the design is traced by using a permanent marker.
7.Then,the design is cut along the lines.
8.Subsequently,a stencil is cut out from a piece of cardboard.
9.After that,the stencil is placed on the surface of the new coir mat.
10.Finally.the stencil is sprayed over the stencil.

3 safety measures
1.wear a apron
2.wear a mask
3.wear eye protector

# data[].attributes.headline
MUHAMAD HANIF YUSMAN BIN MOHD HANAPPI 01DEE20F1091

# data[].attributes.subject
MUHAMAD HANIF YUSMAN BIN MOHD HANAPPI 01DEE20F1091

# data[].attributes.body
1. Firstly, the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas.
3.Next, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.After that,the paper template
is laid flat on top of coir.
6.Next,the design is traced by using a permanent marker.
7.Then, the design is cut along the lines.
8.After that, a stencil is cut out from a piece of cardboard.
9.Next, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over.

3 safety measures :
1. Wear glove to avoid hand from exposure to spray.

2. Be careful when handling sharp tools to avoid injuries.

3. Wear a mask to avoid inhalation of paint chemicals while using paint spray.

# data[].attributes.headline
Muhammad Nizzul Hazim Bin Asrul Fahizan (01DEE20F1101)

# data[].attributes.subject
Muhammad Nizzul Hazim Bin Asrul Fahizan (01DEE20F1101)

# data[].attributes.body
Doormat

1) Firstly, the coir is measured length and width .
2) Secondly, large piece of paper is used as a canvas .
3) Thirdly, the paper by using a marker pen is drawed by preferred doormat shape .
4) Fourth, the coir are fliped over .
5) Fifth, the paper flat template is layed on top of coir .
6) Then, the design is traced by using a permanent marker. 7) After that, the design is cut along the lines.
8) Next, a stencil is cut out from a piece of cardboard.
9) Subsequently, the stencil is placed on the surface of the new coir mat.
10) Finally, paint all is sprayed over the stencil .

Safety Measures
1. Wear glove to avoid hand from exposure to spray
2. Wear eye protector to avoid spray dusk .
3. Wear a face mask before spray paint to prevent paint gas from inhal.

# data[].attributes.headline
MUHAMAD HARITH IRFAN BIN MOHD NAZRI (01DEE20F1095)

# data[].attributes.subject
MUHAMAD HARITH IRFAN BIN MOHD NAZRI (01DEE20F1095)

# data[].attributes.body
DOORMAT

1. Firstly, the coir is measured length and width .
2. Secondly, large piece of paper is used as a canvas .
3. Thirdly, the paper by using a marker pen is drawed by preferred doormat shape .
4. Fourth, the coir are fliped over .
5. Fifth, the paper flat template is layed on top of coir .
6. Then, the design is traced by using a permanent marker. 7. After that, the design is cut along the lines.
8. Next, a stencil is cut out from a piece of cardboard.
9. Subsequently, the stencil is placed on the surface of the new coir mat.
10. Finally, paint all is sprayed over the stencil .

Safety Measures
1. Wear glove to avoid hand from exposure to spray
2. Wear eye protector to avoid spray dusk .
3. Wear a face mask before spray paint to prevent paint gas from inhal

# data[].attributes.headline
MOHAMAD ZULSYAHIMAN BIN BAHARUDIN (01DEE20F1096)

# data[].attributes.subject
MOHAMAD ZULSYAHIMAN BIN BAHARUDIN (01DEE20F1096)

# data[].attributes.body
1.Firstly, the length and the width of the coir are measured.
2.Next, a large piece of paper is used as a canvas.
3.After that, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.Next, the paper template is laid flat on top of coir.
6.Subsequently, the design is traced by using a permanent marker.
7.After that, the design is cut along the lines.
8.Next, a stencil is cut out form a piece of cardboard.
9.Then, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over .

Safety Measures
1. Wear a glove to avoid injury at hand.
2.Wear an apron to protect our cloth
3.Wear a mask to prevent from inhaling spray chemicals

# data[].attributes.headline
MUHAMMAD WAFI BIN MOHD ASRI (01DEE20F1099)

# data[].attributes.subject
MUHAMMAD WAFI BIN MOHD ASRI (01DEE20F1099)

# data[].attributes.body
MAKING A DOORMAT

1. Firstly, the length and the width of the coir are measured.

2. Secondly, a large  piece of paper is used as a canvas.

3. Thirdly, the preferred doormat shape is drawn  on the paper by using a marker pen.

4. Next, the coir is flipped over.

5. Subsequently, the paper template is laid flat on top of coir.

6. Next, the design is traced by using a permanent marker.

7. Then, the design is cut along the lines.

8. Afterward, a stencil is cut out from a piece of cardboard.

9. After that, the stencil is placed on the surface of the new coir mat.

10. Finally, the stencil is sprayed paint all over.

Safety Measures:

1. Wear appropriate safety equipment to avoid injury.

2. Be careful when measuring, cutting and painting to avoid danger.

3. Follow the following procedure step by step to avoid mistakes in the manufacture of doormat.

# data[].attributes.headline
MUHAMMAD DANIAL AISY BIN ANIZAM(01DEE20F1084)

# data[].attributes.subject
MUHAMMAD DANIAL AISY BIN ANIZAM(01DEE20F1084)

# data[].attributes.body
1. Firstly, the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas.
3.Next, the preferred doormat shape is drawn on the paper by using a marker pen.
4. After that, the coir is flipped over.
5. Subsequently, the paper template is laid flat on top of coir.
6. Then, the design is traced by using a  permanent marker.
7. Later, the design is cut along the lines.
8.Then,the stencil is cut out from a piece of cardboard.
9. Next ,the stencil is placed on the surface of the new coir
mat.
10.Finally,the stencil is sprayed paint all over.

Safety Measures
1. Wear suitable clothing and apron to avoid cloth get dirty
2.Hold knife properly so that you don't hurt yourself
3. Wear face mask to avoid inhaling spray chemicals

# data[].attributes.body
1.First of all,the length and the width of the coir are
measured.
2.Then,a large piece of paper is used as a canvas.
3.Next,the preferred doormat shape is drawn on the paper by
using a marker pen.
4.After that,the coil is flipped over.
5.Then,the paper template is laid flat on top of coir.
6.Next,the design is traced by using a permanent marker.
7.After that,the design is cut along the lines.
8.Then,the stencil is cut out from a piece of cardboard.
9.Later,the stencil is placed on the surface of the new coir
mat.
10.Finally,the stencil is sprayed paint all over.

Safety Measures
1. Wear safety glasess to protect eyes from a splashes spray.
2.Wear apron to make sure the spray can’t dirty the cloth.
3.Wear mask to protect the breathing and smell the spray

# data[].attributes.headline
LUQMAN HAKIMI BIN MOHD AZAN (01DEE20F1088)

# data[].attributes.subject
LUQMAN HAKIMI BIN MOHD AZAN (01DEE20F1088)

# data[].attributes.body
1. Firstly, the length and the width of the coir are measured.
2. Secondly, a large piece of paper is used as a canvas.
3. Thirdly, the preferred doormat shape on the paper is drawn by using a marker pen.
4. Next, the coir is flipped over.
5. After that, the paper template is laid flat on top of coir.
6. Then, the design is traced by using a  permanent marker.
7. Later, the design is cut along the lines.
8. Subsequently, a stencil is cut out from a piece of cardboard.
9. Next, the stencil is placed on the surface of the new coir mat.
10. Finally, the stencil is sprayed paint all over.

3 safety measures:
1. Wear a glove when using  the knife to prevent an injury to your finger.
2. Wear a suitable mask when using the spray paint to avoid inhaling the hazardous of the chemical paint.
3. Use a open area when you use the spray paint to reduce chemicals vapours around you.

# data[].attributes.headline
MUHAMMAD FIRDAUS BIN MOHAMAD AZLEE 01DEE20F1093

# data[].attributes.subject
MUHAMMAD FIRDAUS BIN MOHAMAD AZLEE 01DEE20F1093

# data[].attributes.body
MAKING A DOORMAT

1) Firstly, the length and the width are measured of the coir.
2) Secondly, a large piece of paper is used as a canvas.
3) Thirdly, the preferred doormat shape on the paper is drawn by using a marker pen.
4) Fourthly, the coir is flipped over.
5) Next, the paper template is laid flat on top of coir.
6) After that, the design is traced  by using a permanent marker.
7) Later, the design is cut along the lines.
8) Subsequently, a stencil is cut out from a piece of cardboard.
9) Then, the stencil is placed on the surface of the new coir mat.
10) Finally, paint is sprayed all over the stencil.

Safety measures
1)Wear glove to avoid injury.
2)Wear a face mask to avoid inhalation of paint chemicals.
3)Be careful using the knife si as not to get injured.

# data[].attributes.body
(01DEE20F1085)

1. Firstly, the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas.
3.Next, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.After that,the paper template
is laid flat on top of coir.
6.Next,the design is traced by using a permanent marker.
7.Then, the design is cut along the lines.
8.After that, a stencil is cut out form a piece of cardboard.
9.Next, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over.

# data[].attributes.headline
NUR ALYAA ATHIRAH BINTI RIZALUDDIN (01DEE20F1102)

# data[].attributes.subject
NUR ALYAA ATHIRAH BINTI RIZALUDDIN (01DEE20F1102)

# data[].attributes.body
1. Firstly, the length and the width of the coir are measured.
2.Secondly, a large piece of paper is used as a canvas.
3. Thirdly, the preferred doormat shape on the paper is drawn using a marker pen.
4.Then, the coir is flipped over.
5.After that, the paper template flat is laid on top of coir.
6.Next, the design is traced by using a permanent marker.
7.Then, the desigm is cut along the lines.
8.Subsequently, a stencil is cut out from a piece of cardboard.
9.Next, the stencil is placed on the surfaced of the new coir mat.
10. Lastly, the stencil is sprayed paint all over.

3 safety measures:
1- Wear an apron to avoid cloth dirt.
2- Wear long sleve to protect our skin
3. Be careful when using sharp tools to avoid injuries.

# data[].attributes.headline
NUR SHAZLIYANA BINTI ZAMURI (01DEE20F1092)

# data[].attributes.subject
NUR SHAZLIYANA BINTI ZAMURI (01DEE20F1092)

# data[].attributes.body
Making a doormat

1. First of all , the length and the width of the coir are measured.

2. Second , a large piece of paper as a canvas is used.

3. Third, the preferred doormat shape on the paper is drawn by using a marker pen.

4.  Fourth, the coir is flipped over.

5. Then, the paper template flat is laid on top of coir.

6. Next, the design is traced by using a permanent marker.

7. After that, the design is cut along the lines.

8. Later, a stencil is cut out from a piece of cardboard.

9. Subsequently, the stencil is placed on the surface of the new coir mat.

10. Finally, the stencil is spray all over.

3 safety measures :
1. Wear an apron to avoid cloth from being exposed to paint.

2. Be careful when handling sharp tools to avoid injuries.

3. Wear a mask to avoid inhalation of paint chemicals while using paint spray.

# data[].attributes.body
01DEE20F1094
1.Firstly,the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas.
3.Then,the preferred doormat shape is drawn on the paper by using a marker pen.
4.After that,the coil is flipped over.
5.Then,the paper template is laid flat on top of coir.
6.Subsequently,the design is traced by using a permanent marker.
7.After that,the design is cut along the lines.
8.Then,the stencil is cut out from a piece of cardboard.
9.Later,the stencil is placed on the surface of the new coir mat.
10.Finally,the stencil is sprayed paint all over.

Safety Measures
1. Be careful when using sharp tools to avoid injuries.
2.Wear apron to avoid the spray from dirt the cloth.
3.Wear mask to avoid breathe smell of spray.

# data[].attributes.body
01DEE20F1083
1.Firstly, the length and the width of the coir are measured.
2.Next, a large piece of paper is used as a canvas.
3.After that, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.Next, the paper template is laid flat on top of coir.
6.Subsequently, the design is traced by using a permanent marker.
7.After that, the design is cut along the lines.
8.Then, a stencil is cut out form a piece of cardboard.
9.Next, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over .

Safety measures
1.You need to be careful when using the sharp tools to avoid injuries.
2.You must wear a mask to avoid sucking too much the smell of paint.
3.You should wear long sleve to avoid the paint harm your skin.

# data[].attributes.body
1)Firstly, the length and the width  of the coir are measured.
2)Secondly, a large piece of paper  is used as a canvas.
3)Thirdly, the preferred doormat shape on the paper is drawn by using a maker pen.
4)Then, the coir is flipped over.
5)Next, the paper template flat is laid on top of coir.
6)  Then, the design is traced by using a permanent marker.
7)Subsequently, the design is cut along the lines.
8) After that, a stencil is cut from a piece of cardboard.
9)Then, the stencil is placed on the surface of the new coir mat.
10) Lastly, the stencil is sprayed paint all over.

Safety Measures :
1) Be careful when using a sharp knife to avoid injury.
2) Use an apron  to avoid cloth dirty.
3)Before cut the stencil put a thin wood on the stencil to avoid the floor damage.

# data[].attributes.headline
MUHAMMAD AFIQ BIN SAPAWI (01DEE20F1100) "MAKING A DOORMAT"

# data[].attributes.subject
MUHAMMAD AFIQ BIN SAPAWI (01DEE20F1100) "MAKING A DOORMAT"

# data[].attributes.body
1) Firstly, the length and the width are measured of the coir.
2) Secondly, a large piece of paper is used as a canvas.
3) Thirdly, the preferred doormat shape on the paper is drawn by using a marker pen.
4) Next, the coir is flipped over.
5) Then, the paper template flat is laid on top of coir.
6) After that, the design is traced  by using a permanent marker.
7) Later, the design is cut along the lines.
8) Next, a stencil is cut out from a piece of cardboard.
9) Then, the stencil is placed on the surface of the new coir mat.
10) Finally, the stencil is sprayed paint all over.

Safety Measures :
i) You need to be careful when using sharp tools to avoid injury.
ii) Wear gloves when spray because to avoid from exposed to paint
ii) Keep the paper away from any possibility that could make the paper damaged or torn

# data[].attributes.headline
ANIS IWANI BINTI MOHAMMED YUSOF - 01DEE20F1098

# data[].attributes.subject
ANIS IWANI BINTI MOHAMMED YUSOF - 01DEE20F1098

# data[].attributes.body
Making a doormat
1. First, the length and the width of the coir are measured.
2. Second, a large piece of paper is used as a canvas.
3. Third, on the paper the preferred doormat shape is drawn by using a marker pen.
4. Fourth, the coir is flipped over.
5. Next, the paper template is laid on the top of coir.
6. Then, the design is traced by using permanent marker.
7. After that, the lines are cut along the design.
8. Subsequently, a stencil is cut out from a piece of cardboard.
9. Also, the stencil is placed on the surface of the new coir mat.
10. Finally, the stencil is spray painted all over.

Safety Measures:
1. Wear gloves if you’re handling sharp objects.
2. Always wear appropriate clothing and shoes.
3. Always follow the correct procedures.