# data[].attributes.body
It is an Address Latch Enable signal. It goes high during first T state of a machine cycle and enables the lower 8-bits of the address. Shreyash renuse

# data[].attributes.headline
The external interrupts of 8051 are INT0and. INT1 These interrupts can be programmed to either edge-triggered or level triggered.  Shreyash renuse

# data[].attributes.subject
The external interrupts of 8051 are INT0and. INT1 These interrupts can be programmed to either edge-triggered or level triggered.  Shreyash renuse

# data[].attributes.body
2. interrupt unit

3. Bank select and flags

4. Arithmetic purpose

Aishwarya Gophane

# data[].attributes.body
Saloni khatpe

# data[].attributes.body
ALE that is Address Latch Enable. It is an active-high input control signal. ALE signal is used for demultiplexing the multiplexed Address/Data bus of Port 0 during external memory interfacing

Bhatane Rahul

# data[].attributes.headline
Arithmetic purpose. 2)bank select 3) timer units 4) parallel I/o 5) communication 

# data[].attributes.subject
Arithmetic purpose. 2)bank select 3) timer units 4) parallel I/o 5) communication 

# data[].attributes.body
Priti Wavalkar

# data[].attributes.body
address latch enable

sabista

# data[].attributes.headline
Latching the address to memory interface

# data[].attributes.subject
Latching the address to memory interface

# data[].attributes.body
Pratiksha pawar

# data[].attributes.body
Demultiplex

Bus control

Ajitkumar Gaikwad

# data[].attributes.headline
ALE means address latch enable and it is used as demultiplex the data and address.

# data[].attributes.subject
ALE means address latch enable and it is used as demultiplex the data and address.

# data[].attributes.body
Saloni khatpe

# data[].attributes.body
Latching the address to memory interface.

Ashwini kolhe

# data[].attributes.headline
Address Latch Enable register is use for demultiplexing the address of external program ROM

# data[].attributes.subject
Address Latch Enable register is use for demultiplexing the address of external program ROM

# data[].attributes.body
Kamlesh Kusumale

# data[].attributes.headline
Address Latch Enable (ALE).. data signals available at port 0..

# data[].attributes.subject
Address Latch Enable (ALE).. data signals available at port 0..

# data[].attributes.body
BHUSHAN...

# data[].attributes.body
Saloni khatpe

# data[].attributes.headline
Enables you to exchange data within a system group 

# data[].attributes.subject
Enables you to exchange data within a system group 

# data[].attributes.body
Aishwarya Gophane

# data[].attributes.headline
ALE signal is used to enable latch & Demultiplex the data Sahil Mohite

# data[].attributes.subject
ALE signal is used to enable latch & Demultiplex the data Sahil Mohite

# data[].attributes.headline
INT0 & INT1 are external interrupts of 8051 Microcontroller 

# data[].attributes.subject
INT0 & INT1 are external interrupts of 8051 Microcontroller 

# data[].attributes.body
Kamlesh Kusumale

# data[].attributes.body
sabista

# data[].attributes.headline
ALE is user for demultiplexing and decoding the data

# data[].attributes.subject
ALE is user for demultiplexing and decoding the data

# data[].attributes.body
~Madhuri dongare

# data[].attributes.body
INT1 : Pin4. : (p3.3)

Ajitkumar Gaikwad

# data[].attributes.headline
ALE is the address latch enable.prachi pawar 

# data[].attributes.subject
ALE is the address latch enable.prachi pawar 

# data[].attributes.headline
The registers used to access the stack is called the Stack Pointer (SP) register. Shreyash renuse

# data[].attributes.subject
The registers used to access the stack is called the Stack Pointer (SP) register. Shreyash renuse

# data[].attributes.body
Bhagyashree kusalkar

# data[].attributes.body
Kamlesh Kusumale

# data[].attributes.headline
A signal generated by a hardware device outside the processor promoting and immediate response from the system 

# data[].attributes.subject
A signal generated by a hardware device outside the processor promoting and immediate response from the system 

# data[].attributes.body
Shravani veer

# data[].attributes.body
Sahil Mohite

# data[].attributes.body
ALE stands for Address latch enable

Rutuja more

# data[].attributes.body
Ashwini kolhe

# data[].attributes.body
sabista

# data[].attributes.headline
It is used as count for counting purpose.

# data[].attributes.subject
It is used as count for counting purpose.

# data[].attributes.body
Saloni khatpe

# data[].attributes.headline
INT0 AND INT1 are the external interrupt.

# data[].attributes.subject
INT0 AND INT1 are the external interrupt.

# data[].attributes.body
Enable you to exchange data within a system group we can use ale to customise data

Sahil Thopate

# data[].attributes.body
Sahil Mohite

# data[].attributes.body
Pratiksha pawar

# data[].attributes.body
Ajitkumar Gaikwad

# data[].attributes.body
It is used to provide accurate timings for various control application and also used as counter for counting purpose.

Shakti Natekar.

# data[].attributes.body
12 MHz

Rutuja

# data[].attributes.body
Tejaswini karmare

# data[].attributes.headline
INT0 nd I T1 it is the external interrupts . Khopade anagha 

# data[].attributes.subject
INT0 nd I T1 it is the external interrupts . Khopade anagha 

# data[].attributes.body
Application Link Enabling (ALE)

It an enables you to exchange data within a system group. Exchange data within fraction of time .

Name - tanmay lonari.

# data[].attributes.body
Bhatane Rahul

# data[].attributes.body
Saloni

# data[].attributes.body
Ashwini kolhe

# data[].attributes.headline
ALE signal is used to enable latch & demultiplex the data 

# data[].attributes.subject
ALE signal is used to enable latch & demultiplex the data 

# data[].attributes.body
Lokesh Jangam

# data[].attributes.body
Kamlesh Kusumale

# data[].attributes.body
~madhuri dongare

# data[].attributes.headline
Their are 6 external interrupt... In those 6 their are 2 external interrupt.. And interrupt comes from input/output device,and other external source..etc...

# data[].attributes.subject
Their are 6 external interrupt... In those 6 their are 2 external interrupt.. And interrupt comes from input/output device,and other external source..etc...

# data[].attributes.body
Bhushan....

# data[].attributes.body
Tejaswini karmare

# data[].attributes.headline
It is used to generate a clock.prachi pawar 

# data[].attributes.subject
It is used to generate a clock.prachi pawar 

# data[].attributes.headline
ALE is address enable latch which used for dimultiplexing, n it access data or address via latching with external sources..Neha Ingulkar 

# data[].attributes.subject
ALE is address enable latch which used for dimultiplexing, n it access data or address via latching with external sources..Neha Ingulkar 

# data[].attributes.headline
Timer in 8051 use of the counte the clock pulse 

# data[].attributes.subject
Timer in 8051 use of the counte the clock pulse 

# data[].attributes.body
Provide the time

Bhagyashree kusalkar

# data[].attributes.body
Sahil Mohite

# data[].attributes.body
Bhatane Rahul

# data[].attributes.body
~madhuri dongare

# data[].attributes.body
Ajitkumar Gaikwad

# data[].attributes.body
Pratiksha pawar

# data[].attributes.body
Ale signal is used for demultiplexing the multiplexwd address of port 0 during external memory interfacing

-Amar sawant

# data[].attributes.body
The ALE is function of the enable to exchange data within a system group we can use ALE to customise data. Aditya kumbhar

# data[].attributes.headline
ALE is stand for Address Latch Enable , 

# data[].attributes.subject
ALE is stand for Address Latch Enable , 

# data[].attributes.body
Mahadev Kusalkar

# data[].attributes.body
12MHz

Shakti Natekar

# data[].attributes.body
Priti wavalkar

# data[].attributes.body
Ashwini kolhe

# data[].attributes.headline
Generating delays or calculating time between two events 

# data[].attributes.subject
Generating delays or calculating time between two events 

# data[].attributes.body
Bhagyashree kusalkar

# data[].attributes.headline
It is an active high eallat Pin It stands for ALE is used to Address Latch Enable demaltiplex the lacth of data

# data[].attributes.subject
It is an active high eallat Pin It stands for ALE is used to Address Latch Enable demaltiplex the lacth of data

# data[].attributes.body
address and the data.

# data[].attributes.body
sabista

# data[].attributes.headline
INT0 and INT1 are the external interupts 

# data[].attributes.subject
INT0 and INT1 are the external interupts 

# data[].attributes.body
Pornima Shirke

# data[].attributes.headline
Bank 1 register is used as a stack. Vikas Thakur

# data[].attributes.subject
Bank 1 register is used as a stack. Vikas Thakur

# data[].attributes.body
Mahadev Kusalkar

# data[].attributes.body
It is used to provide timing for various control application & also used as counter

~Madhuri

# data[].attributes.body
Pratiksha pawar

# data[].attributes.body
Bhatane Rahul

# data[].attributes.body
Bhagyashree kusalkar

# data[].attributes.body
Mahadev Kusalkar

# data[].attributes.body
Ashwini kolhe

# data[].attributes.body
12 mhz

Ajitkumar Gaikwad

# data[].attributes.headline
INT0 & INT1 are external interupts in 8051

# data[].attributes.subject
INT0 & INT1 are external interupts in 8051

# data[].attributes.body
Lokesh Jangam

# data[].attributes.body
~madhuri

# data[].attributes.body
sabista

# data[].attributes.body
bank select

flags

arithmetic

sabista

# data[].attributes.headline
It is an active high eallat Pin It stands for ALE is used to Address Latch Enable demaltiplex the of latch of data            akash bagal

# data[].attributes.subject
It is an active high eallat Pin It stands for ALE is used to Address Latch Enable demaltiplex the of latch of data            akash bagal

# data[].attributes.body
address and the data.

# data[].attributes.headline
these timers can be controlled individually. 1) Generating Delays or calculating time between two events (TIMER MODE). 2) Counting the events (COUNTER MODE). 3) Generating BAUDRATE for SERIAL COMMUNICATION. Shreyash renuse

# data[].attributes.subject
these timers can be controlled individually. 1) Generating Delays or calculating time between two events (TIMER MODE). 2) Counting the events (COUNTER MODE). 3) Generating BAUDRATE for SERIAL COMMUNICATION. Shreyash renuse

# data[].attributes.body
ALE stands for Address latch enable and it controls signals in microprocessors

Rohan Ingole

# data[].attributes.body
Mahadev Kusalkar

# data[].attributes.body
Into pin 3.(P3.2)

Sahil Thopate