# data[].attributes.body
Well, I started my feeder on the weekend with my potatoes and we put it in the part of my house where birds arrive, we used a bottle and a spoon and a thread to hang it from the branch, we started putting the thread to start putting the bottle and spoon to I was ready and then we put the food that in a few days was not there because the birds in the nests of the libustrines had eaten it

# data[].attributes.body
Well, I made my feeder just using a bottle and wire and cups and hot glue. The first thing I did was cut the cardboard in a circular shape and make a hole in the center of 11cm t place the bottle in the center, and the bottle stuck in the hole with hot glue what I did was make about three holes in it so that Drop the food on the cardboard platform and then tie the cardboard with some wire strands and that's it

# data[].attributes.body
First I vacated the container that I was going to occupy and then I cleaned it, the second thing was to see if it would work the size it had and then I fixed it so that there was no part where to make a mes

# data[].attributes.body
1) Disinfect the material

Plastic bottles: The wrapper is removed, soaked in soapy or alcoholic water for 5 minutes and then allowed to dry for another 5 minutes.

an old carton box: Remove labels or other things stuck on it. Then pass a cloth with bleach to clean it.

2)

Bottles: we have to split the bottles in three parts, as you can see in the image, using a knife or scissors. in the upper part of the bottle you need to cut a circle of the size of two bottles

Be careful not to hurt your self

carton box: with the cutter you need to cut the lower lapels of the box, leaving the ones from the top. then you draw two circles in the smaller sides of the box. and you cut them so you can put the bottle.

3)

Using silicone (hot or cold), glue part 1 of the bottle and part 2, then in the remaining space of bottle 1, glue bottle 3. (Place silicone to the small holes).

Then the assembled bottle is inserted into one of the holes, it is glued with silicone and the same is repeated with the other side of the box.

4) decoration

First paint the entire box with white, wait for it to dry, choose a pastel pink color to paint the entire box and then glue stones to firm it and warm it with the wind.

In my opinion it was not so easy to do but I did like the ease with which it works, because it makes the water not fall so hard and the food can be filled well and they are problems.

# data[].attributes.body
1.To reduce the amount of plastic we tthrow .2.To re use plastic we have at home .

# data[].attributes.body
How can we reuse plastic at home?