# data[].attributes.headline
Soffit Installation Process | Yitac Singapore

# data[].attributes.subject
Soffit Installation Process | Yitac Singapore

# data[].attributes.attachment_link.readable_text
An air purifier can absorb, filter, and convert different gases and particles in the air. The manufacturers of air purifiers repeatedly point out the benefits for allergy sufferers. According to scientific findings, the quality of life may increase for people suffering from allergic asthma, generally chronic respiratory diseases, or a mildew allergy.

Air purifiers bind the particles in the air and Soffit Installation cleans the environment of pollutants. However, this does not necessarily mean that air purifiers release people from allergies. Rather, the devices can ensure that people with less allergenic stimulating particles contact less. Allergic causes are thereby reduced. Air purifiers in many cases provide relief and thus a greater quality of life.

Another advantage of air purifiers is the filtering of tobacco and cigarette smoke. In smoking households, these devices are very popular because they ensure that the smoke in the room air is broken down faster. However, air cleaners also generally ensure that bad odors sold. Especially in kitchens, they supplement the airing after cooking to dispel annoying kitchen odors. Smaller air purifiers can be placed in appropriate positions in the room as needed.

Many devices have different setting options that can be adapted to your personal needs and the respective room or odor situations. Different filters are used.

Disadvantages of Air Purifiers

In addition to the advantages mentioned, air purifiers also have some disadvantages. An air purifier is not cheap, for a good appliance in the household you have to spend between 120 and 180$. In addition to the cost, additional costs may be incurred if filters of the air purifier must be replaced. Recommendations for replacement can usually be found in the respective operating instructions. In addition, fall during operation of the air purifier electricity costs. The power consumption depends on the device, the respective power, and operating setting. In our tests on household air purifiers and office air purifiers, we have reported the power consumption of tested devices.

An air purifier must be cleaned in between like most electrical appliances. With these devices, the filters are freed of absorbed dust and micro particles after a certain period of time.

If an air purifier is in operation, it starts from a certain volume. The volume level differs depending on the setting on the unit. Some devices have a night or sleep mode, when the air filter is set to operate in very quiet condition.

Some Passive Cooling System air purifiers have an ozone mode that eliminates very strong odors. Being permanently cleaned with the ozone mode may cause respiratory irritation in the long run. Even though ozone is a natural part of the air, larger amounts in your own environment are not recommended. After air, cleaning with ozone it is advisable to ventilate the room for a few minutes.

Summary of the Advantages and Disadvantages of an Air Purifier:

· Pollutants in the air are eliminated

· Smoke from tobacco and cigarettes is filtered out of the air within a short time

· Air purifiers sell many bad odors - also sustainable

· Air purifiers are usually handy and can be easily moved

· Acquisition costs, a good device usually costs more than 100$

· There may be additional costs associated with the purchase of replacement filters

# data[].attributes.attachment_link.title
Advantages and Disadvantages of Air Purifiers

# data[].attributes.attachment_link.description
An air purifier can absorb, filter, and convert different gases and particles in the air. The manufacturers of air purifiers repeatedly point out the benefits for allergy sufferers. According to scientific findings, the quality of life may increase for people suffering from allergic asthma, generally chronic respiratory diseases, or a mildew allergy.

# data[].attributes.headline
Photocatalysis Construction Technology | Yitac Pte 

# data[].attributes.subject
Photocatalysis Construction Technology | Yitac Pte 

# data[].attributes.attachment_link.title
Photocatalytic Self- cleaning Coating | PhotoActiva TB | Photocatalysis

# data[].attributes.attachment_link.description
YiTac (s) Pte Ltd offers photocatalytic coating, Photo activa® TB and Photocatalysis products which have self-cleaning capabilities for exterior walls, painted surface. Drop an enquiry via email.

# data[].attributes.headline
Passive Cooling System For Building Design Approaches

# data[].attributes.subject
Passive Cooling System For Building Design Approaches

# data[].attributes.attachment_link.title
Passive Displacement Ventilation (PDV) | Twenty80 PDV | PDV Coil & System

# data[].attributes.attachment_link.description
YiTac(S) Pte Ltd offers Passive Displacement Ventilation (PDV) Services to Industries. Reduces building dead load, Vibration and noise free environment with PDV System. For Twenty80 PDV System Data, please drop us an enquiry via our email address.

# data[].attributes.headline
Yitac's Process Cooling Pipe Work | Soffit Installation

# data[].attributes.subject
Yitac's Process Cooling Pipe Work | Soffit Installation

# data[].attributes.body
For construction solutions you can refer from the Singapore's number 1 construction company Yitac.

# data[].attributes.attachment_link.readable_text
What is Process Cooling?

The process cooling is done in the plastic processing industry, and it is due to the need for the cool or chill plastics processing machinery. They are related to the thermoplastic materials. It is seen that at room temperature, thermoplastic materials are usually solid. To bring them to some kind of shape they must first be heated to the molten temperature, and they can be manipulated to get a new shape. After they formed their new shape, they then get cooled to solidify them.

In this process, two processes are used, and they process water loop and a cooling water loop. When the hot process water is pumped, it transfers the heat to the cooling water side. This process water is then pumped back to the process equipment to absorb more heat. In this way, the process cooling pipework in large industries and helps in cooling the things.

Different Process Cooling System Principle

The first principle is used in the industry is the principals of heat energy. In this, the heat energy travels from hot medium to a cold medium. Cold energy can't be able to travel in the reverse direction, and so these processes in cooling systems are based on the principals of heat transfer.

The next principle used is in the refrigerated water chillers. In this process, the refrigerant gas which is in the form of compressed vapor is cooled via the condenser so that it will turn into water. Then it is injected to one circuit of the evaporating vessel which is via a thermostatic expansion valve. This helps in transferring the heat from the circuits, and they evaporate the liquid refrigerant.

In this, the water is pumped through the coil matrix. The ambient temperature is then forced over the fins of the coil, and they effectively transfer the heat into the air. This cooled water now pumped back to the cooling water system to plastics process machinery.

The soffit is said to be the part of the cornice, and the main point is where the roof projection and the side walls of the building roofs have got a continuous cornice which usually extends around the building.It is made of same design and color, and they come as per home's siding, and it can be different which depends on the customers.

Materials used to make Soffit

There are many materials which are used for soffits. They can be made from wood, vinyl, and aluminum. These types of materials have got the advantage of painting or finishing with the need for little maintenance. They can also be cut into various lengths which are as per requirement.

usually depends on the type of the material and the construction of the industry. They are available in a wide range of colors and varieties as per the customer requirements.

When you are going to install the soffit, you need to make sure about the place where you want to install this and about the materials that you need for the same.

# data[].attributes.attachment_link.title
How Process Cooling Work Is Done And Soffit Installed?

# data[].attributes.attachment_link.description
The process cooling is done in the plastic processing industry, and it is due to the need for the cool or chill plastics processing machinery. They are related to the thermoplastic materials. It is seen that at room temperature, thermoplastic materials are usually solid.

# data[].attributes.headline
Construction Mechanism Of Photocatalysis & Self Cleaning Coating 

# data[].attributes.subject
Construction Mechanism Of Photocatalysis & Self Cleaning Coating 

# data[].attributes.attachment_link.title
Photocatalytic Self- cleaning Coating | PhotoActiva TB | Photocatalysis

# data[].attributes.attachment_link.description
YiTac (s) Pte Ltd offers photocatalytic coating, Photo activa® TB and Photocatalysis products which have self-cleaning capabilities for exterior walls, painted surface. Drop an enquiry via email.

# data[].attributes.headline
Polyisocyanurate Rigid Board Materials For Construction

# data[].attributes.subject
Polyisocyanurate Rigid Board Materials For Construction

# data[].attributes.body
Click here for quality products

# data[].attributes.headline
 Uses Of PhotoActiva TB & Activa® In Building

# data[].attributes.subject
 Uses Of PhotoActiva TB & Activa® In Building

# data[].attributes.body
The product is non-flammable, non-toxic and environmentally friendly.

# data[].attributes.attachment_link.title
Photocatalytic Self- cleaning Coating | PhotoActiva TB | Photocatalysis

# data[].attributes.attachment_link.description
YiTac (s) Pte Ltd offers photocatalytic coating, Photo activa® TB and Photocatalysis products which have self-cleaning capabilities for exterior walls, painted surface. Drop an enquiry via email.

# data[].attributes.headline
Photocatalytic Coating And Their Useful Applications

# data[].attributes.subject
Photocatalytic Coating And Their Useful Applications

# data[].attributes.attachment_link.readable_text
Emphasis on environment-friendly things is being given highly in modern times. This is the reason that the photocatalyst coating is highly used these days. This is one of the most environment-friendly ways of applying solutions that can be applied in numerous ways. The best part about irrespective of the application one chooses is that all these are safe and assured from the environment point of view. Irrespective of the kind of building type, there is one of the best application types available for the best result.

To understand photocatalysis technically, this is the movement of image reaction powered by the catalysts. Under the aegis of effects of catalysis, the light is engrossed by a set substrate. When it comes about the catalysis generated by pho effects, the activity of photocatalysis remains hugely dependent upon the efficacy of the catalysis to generate the electron effect.

It thus creates free radicals like hydroxyl radicals, those having the ability to go through additional reactions. The photocatalytic coatings are creative method that makes use of high-end technicalities for providing endurable and budget-friendly solutions for numerous kinds of projects. It can be useful for commercial as well as the common residential applications. The technique is getting popular around the globe right now.

The technique can be used for both the indoor as well as the outdoor applications. In case of indoor application, it holds the ability to purify the air in a much cost-effective way, and also swiftly. The best parts, most of these are self-cleaning applications. Photocatalytic coatings are known not just for removing the odors, but also to treat the microbes with an equal level of efficacy.

It can be applied for treating different types of surfaces as well. The most effective surface to be applied for such coatings is the concrete. It helps in boosting the endurance of the surface. It's the self-cleaning that minimizes the threat of pollution on the environment. Photocatalytic coatings are known for their ability to maintain the freshness of the set-up or high-end architectures.

Using the effectiveness of the light, these coatings of such generate self-cleaning surfaces in a much budget-friendly and nature-friendly way. When it comes about the environment-friendly ceramic surfaces, there is indeed no better way to treat those than the photocatalytic treatment. Moreover, these types of treatments demand comparatively much lesser maintenance needs.

The Photocatalytic coating can be excellent on painted surfaces as well. It helps in maintaining the endurance and quality of the paints. This is the reason that such technologies are being used with modern day high-end architectures. Photocatalytic treatments are known for their antifungal effect as well.

The best part, even the areas those don't come in direct contact of sun rays; one can eradicate fungus thoroughly through these products. Photo Catalysis can be excellent for Ultraviolet protection as well. Specifically, it can be incredible regarding protecting plastic paints from the sun rays. Its ability to clean the air by treating the airborne pollutants is incredible.

# data[].attributes.attachment_link.title
Photocatalytic Coating and Their Useful Applications

# data[].attributes.attachment_link.description
Emphasis on environment-friendly things is being given highly in modern times. This is the reason that the photocatalyst coating is highly used these days. This is one of the most environment-friendly ways of applying solutions that can be applied in numerous ways.