# data[].attributes.body
i think that we can improve this we could rip more peels and improve on the project

# data[].attributes.body
Something I would change about this lab is to increase the size of the orange/clementine so we could have more peels and more tooth picks.

# data[].attributes.body
I could have done the drawings better and add more detail to the model.

# data[].attributes.body
One thing we can do to improve this lab is also have a demonstration on how it moves instead of moving it yourself.

# data[].attributes.body
One thing that we can do to improve the lab was to practice peeling the orange first so there wasn't so many small pieces.

# data[].attributes.body
I think it would be better if we made less pieces but they were bigger.

# data[].attributes.body
I think we could use more tooth picks to make it more stable, and less pieces to peel.

# data[].attributes.body
A few things I would improve on my model is having more toothpicks to support the model.

# data[].attributes.body
I think that we could improve the project by adding more toothpicks so that we could hold the pieces of the peel onto the orange better.

# data[].attributes.body
We think we could improve on having the peels be a bit bigger with a bit more toothpicks to fully keep the peels onto the clementine.

# data[].attributes.body
I think that in the future, pretend like the little white stripes on the clementine are sea floor spreading patterns, this adds more onto how continental drift happens.

# data[].attributes.body
I think that we needed less peels to put it back together. And the toothpicks weren't holding the peels good enough.

# data[].attributes.body
I think to improve our models we need to focus more and less talking.

# data[].attributes.body
One thing that I think we could do to improve this project is by going more into detail on what the inside of the orange. For example we should see haw the seeds of the orange can be related to the inside of the Earth. And the mushy fruit could be related to the outer core because that it is mushy and can move easily.

# data[].attributes.body
I think one way we could make this model better is if we had more toothpicks and if it was an orange because they are bigger it might have helped.

# data[].attributes.body
I think in order to improve this project we must have some kind of force driving the peels to continue moving, perhaps a vibration, or something like foam pads on bubbling water.

# data[].attributes.body
I think we can improve this project by using more toothpicks to the pieces will not come off and less pieces so it is a little bit easy to make.

# data[].attributes.body
In my opinion, I think that we could improve peeling our oranges better, so it would be a lot easier to put the orange peel pieces back where it was originally peeled with the toothpicks.

- Ava Greenberg

# data[].attributes.body
I think that we could improve this model by making the orange bigger and maybe something else for the model.

# data[].attributes.body
One thing that we could have done differently was maby use the orange peel to represent how the plates move and collide instead of just pinning them on the orange

# data[].attributes.body
I felt like if I had bigger peels it would have went much smoother.

# data[].attributes.body
I think to improve our models is that when can focus more on the lab and not talking but also when need to look at the pieces that if they fit perfectly like a puzzle.

# data[].attributes.body
The one thing that we could improve on this model is the the partner could maybe give you clue on how to make the model.

# data[].attributes.body
One thing we could change would be to have more tooth picks.

# data[].attributes.body
This project could be better by put more time in it and I pefer to use a google doc.

# data[].attributes.body
elastick band to hold the tooth picks together.

# data[].attributes.body
Lest pieces for the puzzle part of the project.

# data[].attributes.body
I your partner should not peel the orange into 9 pieces.

# data[].attributes.body
I think what I could've done better was make the model better after the peal was undone also I think that I could've done the drawing more detailed.

# data[].attributes.body
I think that we should make the orange bigger so the peels are bigger and use more tooth pics so it stays together better

# data[].attributes.body
We could make it a bettter model if the peel didn't rip and if everyone piled them big sizes.

# data[].attributes.body
One way to improve the model would be not locking it in with toothpicks to represent the crust can be on earth in any orientation

# data[].attributes.body
One thing that I could do to improve my lab was making the peel pieces bigger so it is easier to work with.

# data[].attributes.body
I think that if you found a way to simulate its movement, it could be much more exciting and show how the movement works.

# data[].attributes.body
i think it would be better if we gotten more toothpicks just in case if some peeled more then 7 pieces.

# data[].attributes.body
I think it would be better if we used magnets because the tectonic plates cannot move in the model.

-Sylar Saiyan

# data[].attributes.body
I think that one way we could improve is we could Try and make bigger peels so that it is easier to put back together. I also think we could use more toothpicks to stay more stable.

# data[].attributes.body
I think we could improve this model by using a large orange so it would be easier to see and to make. The clementine peel was really thin and it would be easier to work with if it held it's shape. Using more toothpicks could have helped as well.

# data[].attributes.body
I think we could have more toothpicks to hold down the pieces together or not use oranges and use Styrofoam balls with felt and toothpicks.

# data[].attributes.body
If we made sure that there was space in between the peels to represent gaps between real tectonic plates. Also they could have been pushed together to show mountain ranges.

# data[].attributes.body
We could use more toothpicks in order to keep the orange peel against the orange it self

# data[].attributes.body
I think that if we had more tooth picks it could have been more realistic if we added more since we have 20 to 15 tectonic plates.

# data[].attributes.body
I think that to improve this lab, we should add more toothpicks and to have the ability to peel more than 7 peels of the clementine.

# data[].attributes.body
I think that if there are more things to place inside the peel it would stay stable. If it was bigger it would make it easier for the toothpicks to fit in easily.

# data[].attributes.body
More tooth picks to make it more stable.

# data[].attributes.headline
clementine lab I think we should use something else instead of an orange.

# data[].attributes.subject
clementine lab I think we should use something else instead of an orange.

# data[].attributes.body
kaylee drainville

# data[].attributes.body
a few things I would improve in the model is the amount of tooth picks and if I had a bigger clementine or a orange to make it easier to put the pieces back on the clementine.

# data[].attributes.body
I think that to improve this lab we could use bigger clementines or oranges so it is easier to attach the orange peels.

Shane Alger

# data[].attributes.body
To improve the orange peel model I think that we could've done the same amount of pieces peeled as we had toothpicks so there would be enough toothpciks to hold each piece down.

# data[].attributes.body
I think we could imporve this model by increasing the size of the orange or clementine by at least another inch or two to make it easier to spilt the skin into 6 to 7 pices.

# data[].attributes.body
I believe that to improve this model you would need a way to move the slices easier. As well as making more precise sizes.

# data[].attributes.body
To make this model better I think we could use more toothpicks to hold it down more, And an orange or something bigger so the pieces would be easier to hold down.

# data[].attributes.body
I think if the clementine was bigger or if you changed it to an orange it would be easier to show how the pieces fit back together. I also think more toothpicks would help to keep the pieces in place.

# data[].attributes.body
A suggestion we have to improve the model is to have something that would make the skin easier to work with since it was difficult to put back together and take apart.

# data[].attributes.body
I think that we could have used more toothpicks because with the amount we had Didn't really work too well

# data[].attributes.body
I think that we can improve this model by using more toothpicks to secure the orange peels.

# data[].attributes.body
I think we could make a better model if the orange peels were stronger and the edges didn't rip off when you peeled them. I also think the Clementine could be better do to the amount of layers.

# data[].attributes.body
I think we can improve this project by using a bigger orange or clementine because it would be easier to put the orange peels together.

# data[].attributes.body
We could use more toothpicks if we make a mistake.
Jachia Brownlee

# data[].attributes.body
I think that we can improve this project, buy having the clementines peel better. - Joseph Renda

# data[].attributes.body
One thing we can do to improve is model is use more tooth picks to hold down the orange peel better.

Maddie Egan